Operation: Integration Alumicoat Phase I ( 56k beware ) [Archive]

web56n

07-03-2003, 03:31 AM

Operation: Integration Alumicoat..phase I

Finally.. plans for Integration Alumicoat have been aproved! (by me, web56n)
In the proceeding weeks I will be performing this extreme mod,
with step by step collaboration of details and pictures.
consisting of a completely modded pc work station.

Phase I - Design
this operation will consist of having the entire work station integraded, which will include completely custom built desk that will become the pc's case.
along with a semi-stealthed keyboard and mouse, a stealthed webcam that will be built into lcd monitor and will be remotely controlled from keyboard tray.

Desk top
desk top will be fabricated from 0.040" brushed aluminum, it will include a splat window for viewing purposes, directly in front of monitor.
here is a drawing of top view of desk top
http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/new%20desk1.jpg

also a pic of raw materials
http://www.yoshi.us/web56n/OIA/New%20Folder/1raw.JPG
0.040" brushed aluminum.
here is a drawing of top view of desk top showing pc and drives
http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/new%20top%20drives.GIF
also a drawing of FRONT view showing where drives open and close and are mounted flush with edge of desk top
http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/new%20pic%20drives.JPG
Mods underway...
keyboard tray
I completely covered the aluminuim with masking tape to avoid any unwanted scraches,
I then layed out where keys are, notice no number pad I choose not to include them.
http://www.yoshi.us/web56n/OIA/New%20Folder/4frane.JPG
here are pics of keyboard frame
the frame is made from 1"x1" acrylic, which sits along the outer edge of keyboards tray.
here's pic of frame. the ends were glued together on a 45* angle.
keyboard or whats left of it sits in cavity of frame and brushed aluminuim is on top acting as a lid.
http://www.yoshi.us/web56n/OIA/New%20Folder/2frame.JPG
I've drilled holes at either end to install highpower blue leds which will light up the entire frame
http://www.yoshi.us/web56n/OIA/New%20Folder/3-frame.JPG

DeadSanta

07-03-2003, 04:00 AM

Sweet! Can't wait for the final product! Take lots of pics!! :D

TAZTG

07-03-2003, 06:35 AM

Keep us updated daily. This looks to be one extreme MOD. Document your steps and take plenty of PICS. Looks like a fun, long, project. Sweet..:)

XP1800

07-03-2003, 12:59 PM

mother of god...

I can't wait to see the finished product!

Oh yeah, what if you want to uprade your rig? I hope it's easily accessable, especially if something breaks:eek:

web56n

07-03-2003, 01:51 PM

yes this project was months in the making just for the design, I've hopefuly thought of everything, right down to getting a few of the same keyboards just in case. but to answer your question yes it is easily dismantled if need be...
here shows a pic of each hole in the keyboard tray bezal, filed and sanded.

http://www.yoshi.us/web56n/OIA/New%20Folder/7%20bezel.JPG
also keyboard tray bezal finished and ready for esembling.

http://www.yoshi.us/web56n/OIA/New%20Folder/8bezr.JPG
more pics of tray esembled.
I've chosen to use satin finish aluminum for the edges it has a groove so the acrylic had to have a notch to match
http://www.yoshi.us/web56n/OIA/New%20Folder/5trim.JPG
I put a slice along the edge of the 1" acrylic 7/16" deep to fit the aluminum edging. it slides on with little effort. (press fit)
http://www.yoshi.us/web56n/OIA/New%20Folder/6trim.JPG
this is what it looks like, tray is emty and ready to be wired up with keys,
leds,and sliders
http://www.yoshi.us/web56n/OIA/New%20Folder/10tray.JPG
why no number pad? because all the time I've been using a comp I haven't yet used them. I guess I'm used to the one's above letters.
also here's a quick pic of what bottom will look like

http://www.yoshi.us/web56n/OIA/New%20Folder/11lights.JPG

Flexo

07-03-2003, 01:55 PM

Wow! I can't wait to see this...

DeadSanta

07-03-2003, 02:17 PM

And I thought painting my chassis was a pain in the anus... :D

Mrfreddio55

07-03-2003, 02:57 PM

:eek: :eek: You must have more patience than i've got. If I were to take on a project that large, id get bored of it fast...

Good luck, it looks really good so far :)

DeadSanta

07-03-2003, 03:33 PM

What's the ETA on completion?

iLuminatae

07-03-2003, 03:42 PM

Originally posted by DeadSanta
And I thought painting my chassis was a pain in the anus... :D

lol

web56n

07-04-2003, 02:34 PM

here is pic of molded clear silicon, 1/8"x6"x13" this is how I made the keys to soft touch! yeah, just like elevator buttons
this goes right on top of electronic keyboard pad, instead of any keys or all the little rubber caps, this not only made the keyboard soft touch but it also let me light up all the keys..by placing 4 blue led's around the outsides.
http://www.yoshi.us/web56n/OIA/New%20Folder/9%20soft.JPG
here is keyboard tray with keys, all keys light up it's just the pics. sorry for the poor pics.
http://www.yoshi.us/web56n/OIA/New%20Folder/12%20keys.JPG
and day time

http://www.yoshi.us/web56n/OIA/New%20Folder/13day.JPG

will post better pics.......

DeadSanta

07-04-2003, 02:39 PM

OH MAN! THAT'S SO COOL! :eek:

web56n

07-05-2003, 06:16 PM

workin on Phase II,
when power is off and when power is on..
OK people need your input....
I've made these power buttons what do you think?
http://www.hpphoto.com/servlet/LinkPhoto?GUID=83735114-471d-4803-26f6-466b27817270&size=

XP1800

07-05-2003, 06:20 PM

I'm not gonna lie, that looks pretty sweet, but I think you can spice it up more:) Is their anyway you could encase it in aluminum? That way the LED would just shine out the front, I think that would look cool:cool:

web56n

07-05-2003, 06:35 PM

me understands, I just did this to see what people thought.
it will be incorperated into something...thanks

TAZTG

07-05-2003, 07:00 PM

Thats one nice Power Switch. Did you do the lettering your own self? Looking Good..

web56n

07-05-2003, 07:05 PM

Originally posted by DeadSanta
What's the ETA on completion?

I hope to have everything complete in two weeks or less......

web56n

07-09-2003, 10:05 PM

Phase II mods underway!
here are pics of front edge of desktop were cd-rw and dvd drives will be located, this piece will sit right in front of keyboard.

here's pics of front bezel...
starting with layout,
holes were drilled and again dremel and files were needed.
it looks like this, not quit finished but you get the picture!
this will show you the overall look of front, with drives stealthed,
this also will have power and reboot buttons along with 4- on/off switches for fans. (they all glow in the dark)
the area that is not aluminum is mirrored acrylic and will be back lit with blue led's,
I will be installing them at a later time!

http://www.yoshi.us/web56n/OIA/New%20Folder/front%20bezelwork.JPG
this piece is 80" long and will go along front edge of desk top (one piece)
http://www.yoshi.us/web56n/OIA/New%20Folder/front%20bezel.JPG
here is also close up of switches,
http://www.yoshi.us/web56n/OIA/New%20Folder/close%20up.JPG
I will be starting desktop layout and cutting out window next,
once all pieces are ready then I will be assembling it all together

TAZTG

07-09-2003, 10:42 PM

Its really starting to shape up. You have some real metalworking talent. Those buttons are nice. Did you buy them are have them made? Sweet is all I can say.:)

Tricksterpan

07-10-2003, 05:26 AM

Man that looks great, you are really talented. Can't wait to see it completed.

web56n

07-10-2003, 11:06 AM

Originally posted by TAZTG
Its really starting to shape up. You have some real metalworking talent. Those buttons are nice. Did you buy them are have them made? Sweet is all I can say.:)
thanks, everything that you see and will see of Integration Alumicoat...
is and will be designed and fabricated by myself.

web56n

07-12-2003, 01:44 AM

OK started desk top window, this window is right in front of monitor and also just above keyboard tray,
through this window you'll see the interior of the rig, mobo,cpu,hsu,ram,
http://www.yoshi.us/web56n/OIA/New%20Folder/start%20cutout.JPG

will post finished window right shortly......

talldude

07-12-2003, 01:56 AM

That's a nice, original window. I'm really looking forward to seeing the entire thing assembled.

BTW, what sort of tools are you using?

knuckles644

07-12-2003, 02:30 AM

From the look of the cuts and the starting holes, I think he's using a jig saw on the window. For the smaller stuff a dremel...

How much is this costing you? Raw materials about $150-200?

DeadSanta

07-12-2003, 05:00 AM

Is the rig gonna be put on water? And thus the reason for your design? If that's the case, did ya fashion your own blocks too? :p

DeadSanta

07-12-2003, 05:03 AM

Originally posted by DeadSanta
Is the rig gonna be put on water? And thus the reason for your design? If that's the case, did ya fashion your own blocks too? :p

Dunno how I quoted myself... I'm not THAT self-absorbed. Taz, feel free to delete this post. lol

Trunks

07-12-2003, 06:38 AM

:eek:

I'm speechless. I can't wait to see the final product.

commanderkeen

07-13-2003, 12:46 AM

Come on web I know you got 1 more thing done now... and where is the finished window you promised??? :D

BTW I really like your project, infact it has inspired me a little bit to start modding.

Keep the pics rollin' in.

web56n

07-13-2003, 07:02 PM

OK...here is finished cut out of splat, this is in the middle of gluing blue molding around the edges.
the window will be 60% (auto privacy) tinted this kinda gives an idea of what that will look like...

http://www.yoshi.us/web56n/OIA/New%20Folder/molding.JPG

will post more of splat when completely finished phase II

XP1800

07-13-2003, 07:13 PM

Now if I would peer through that window, would I see the hardware inside? I like the tinted effect, that will look awesome.

Congrats so far, everything is turning out excellent man, you get 2 thumbs up from everyone here!!:D

DeadSanta

07-13-2003, 08:25 PM

HURRY UP AND FINISH!! ;)

I can't wait to see this thig! :D

XP1800

07-13-2003, 08:29 PM

Originally posted by DeadSanta
HURRY UP AND FINISH!! ;)

I can't wait to see this thig! :D

You of all people should know what happens when we hurry!

lol, im just kidding Santa:D

I'm just as anxious:eek:

vertices

07-13-2003, 11:05 PM

This is an interesting project!:)

I can't wait to see it finished. I'm impressed!!:)

number1sixerfan

07-13-2003, 11:36 PM

Man this looks promising.:eek:

web56n

07-14-2003, 12:38 AM

the mods don't stop there.....
here are some pics of aluminum mouse pad, ya that's right aluminum!
it works great and it doesn't scratch...not after being clear coated...it also lights up.....
some of the pics are blurry, until I figure out how to take better night pics (sorry)
day
http://www.yoshi.us/web56n/OIA/New%20Folder/mouse.JPG
and
http://www.yoshi.us/web56n/OIA/New%20Folder/mouse%20pad.JPG
at night

http://www.yoshi.us/web56n/OIA/New%20Folder/mouse%20pad%20n.JPG

and this one I shut off keyboard lights, so you can see better...
http://www.yoshi.us/web56n/OIA/New%20Folder/mpn.JPG

on to monitor, and then full essembly

XP1800

07-14-2003, 12:45 AM

Dude it looks amazing so far! TazTG better give you a special avator after this, I think you deserve it:D

DeadSanta

07-14-2003, 12:53 AM

I guess what they say about Canadians isn't true afterall! :p ;)

web56n

07-14-2003, 12:59 AM

Originally posted by DeadSanta
I guess what they say about Canadians isn't true afterall! :p ;)

OK let me in on what they say?
I know that a couple of major companys are interested in supplying some hardware for this operation......and there not from canada.....

toastbim

07-14-2003, 01:23 AM

stands up and cheers for his fellow canuck :) :D
this is AWESOME :eek: i am amazed!!
i wish you luck, i will checking on this thread every day.
btw that keyboard and mouse pad looks sweeet .GOOD WORK!

GLScooby

07-14-2003, 01:38 AM

Truly impressive so far. Awesome attention to detail.

DeadSanta

07-14-2003, 02:54 AM

Originally posted by web56n

OK let me in on what they say?
I know that a couple of major companys are interested in supplying some hardware for this operation......and there not from canada.....

Ah! I'm just kidding! lol

You're the man. I wish I was as skilled and creative as you. :( :p :D

web56n

07-14-2003, 12:49 PM

Originally posted by DeadSanta

Ah! I'm just kidding! lol

You're the man. I wish I was as skilled and creative as you. :( :p :D

all you people say such nice things about my mods, it makes me ......
well mod!

zackbass

07-14-2003, 01:11 PM

Looks like I got to the party a little late.

Wow, this looks like a really awsome project. Lots more attention to detail than I'd ever be able to give a case. The metalwork looks extremely well done, I'd love to see some pics of pieces while your working on them and some info on the proceses used.

Figgaz

07-14-2003, 01:57 PM

truly incredible... how do you find the time? the 1 and only 1 constructve criticism is i think that the mouse pad is a tad small. But i think is is a little tiny IF your a gamer, cause if not it is fine.

TAZTG

07-14-2003, 01:58 PM

We will have to add web56n to the Hall of Fame Thread with a special category. Keep up the good work and keep them PICS coming... :D :D

web56n

07-14-2003, 03:10 PM

Originally posted by Figgaz
truly incredible... how do you find the time? the 1 and only 1 constructve criticism is i think that the mouse pad is a tad small. But i think is is a little tiny IF your a gamer, cause if not it is fine.
hey thanks.....
ya know I thought the same thing, however your right I'm not much of a gamer. not with a mouse anyways.
my two kids faught over the controller all the time and wires got tangled up every where so I bought them a wireless
I generally use a controller or a wheel.

as for the time, well let's just say I got lots.....

Figgaz

07-14-2003, 04:26 PM

During the summer i have loads of time but no motivation or ambition, i think thats my downfall lol. What else are you planning on doing to this completely custom rig?

DeadSanta

07-14-2003, 05:52 PM

Originally posted by Figgaz
During the summer i have loads of time but no motivation or ambition, i think thats my downfall lol. What else are you planning on doing to this completely custom rig?

I have TONS of time, motivation, and ambition... Just no money. :( lol

Figgaz

07-14-2003, 09:46 PM

lol, get a job. if you have one get another one :D. I have money in the bank, your welcome to it if your up for a bank robbery lol.

talldude

07-14-2003, 11:04 PM

Originally posted by Figgaz
lol, get a job. if you have one get another one :D. I have money in the bank, your welcome to it if your up for a bank robbery lol.

Hey, it's a win-win situation. He steals your money from your bank, he gets away with it, the money in the bank is insured by the federal government and you get 100% of your money back! What a dastardly plan. :p

I don't have time either, i'm gonna leave in 4 days so i'm not about to start another project.

DeadSanta

07-14-2003, 11:18 PM

Originally posted by talldude

Hey, it's a win-win situation. He steals your money from your bank, he gets away with it, the money in the bank is insured by the federal government and you get 100% of your money back! What a dastardly plan. :p

I don't have time either, i'm gonna leave in 4 days so i'm not about to start another project.

... I think we have something here... ;) :p

Figgaz

07-15-2003, 01:23 PM

Orginally posted by Dead Santa
... I think we have something here...

I think we do too, be forwarned theres like a million cameras in there. So break in through the bathroom somehow, cause I think its illegal for them to have cameras there!

fbs1992

07-15-2003, 02:12 PM

at first i was confused, but now its coming along very nicely. its gonna be real nice:D :cool: :D

TAZTG

07-15-2003, 05:10 PM

OK folks lets keep this on Topic. Check out this THREAD (http://www.gruntville.com/phpBB2/viewtopic.php?t=3176) over at GruntVille. I swear there are a couple of pICS that web56n didn't post here. I feel cheated, LOL (j/k);) ;) I was wondering how you made the labels for the buttons, and that thread showed me the answer. Sweet Deal

web56n

07-16-2003, 02:05 PM

you's guy's rob the bank when I sell this not now! j/k
tazgt, not cheatin no one...
I'm down, got hit by lighting:eek: monday night, it only took out cable line and modem, thank god for power bar...
won't be up til thursday eve.
damn provider says I'm lucky it's that soon...til then people will probably have monitor finished... then it's just essembly

DeadSanta

07-16-2003, 03:25 PM

Originally posted by web56n
you's guy's rob the bank when I sell this not now! j/k
tazgt, not cheatin no one...
I'm down, got hit by lighting:eek: monday night, it only took out cable line and modem, thank god for power bar...
won't be up til thursday eve.
damn provider says I'm lucky it's that soon...til then people will probably have monitor finished... then it's just essembly

Got hit by lightning, eh? See? Even God is mad at you for posting in GruntVille! ;) :p :D

Glad you're alright.

commanderkeen

07-16-2003, 04:49 PM

Originally posted by DeadSanta

Got hit by lightning, eh? See? Even God is mad at you for posting in GruntVille! ;) :p :D

Glad you're alright.

Man what's the chance of your house out of all the other houses to get hit by lightning... well either way I'm glad you can post some pics tommorrow.

Also... GRUNTVILLE IS EVIL, as are all those other forums you posted on. See ya later

TAZTG

07-16-2003, 04:54 PM

Originally posted by DeadSanta

Got hit by lightning, eh? See? Even God is mad at you for posting in GruntVille! ;) :p :D

Glad you're alright.

Thats pretty good DeadSanta (ROFLMAO). If anything we can Thank God that his home didn't go up in smoke with that Nice Big MOD he's been working that way Gruntville and Sharkies both don't lose out. :p

Now hurry up and finish this before something else happens...:eek:

web56n

07-17-2003, 07:46 PM

ok... these are just construction pics
first off I wanted to lose the monitor base...so it can be placed somewhere else,
http://www.yoshi.us/web56n/OIA/New%20Folder/monitor%20base.JPG
I extended the small power cord with a 6ft. extention cable.
this is what it looks like without base.

http://www.yoshi.us/web56n/OIA/New%20Folder/monitor1.JPG

I've chosen to use 2" aluminum pipe (which still needs to be polished) to house all wires and cables that come from monitor making sure that they all fit. I also just drilled two small holes to match the holes on back of monitor to fasten pipe giving me the same adjustment as before.
]http://www.yoshi.us/web56n/OIA/New%20Folder/2pipe.JPG

I then layed out and cut hole for pipe that will go through desk top, at ther ear of splat window.
http://www.yoshi.us/web56n/OIA/New%20Folder/construction2.JPG
still lots of work to do on monitor and desk.
will post soon
this gives you an idea of what it will all look like.
nowhere near finished yet......
http://www.yoshi.us/web56n/OIA/New%20Folder/construction.JPG

Trunks

07-17-2003, 07:50 PM

wow I really can't wait to see the final project. Very creative and innovative man, keep the pics comin!!

TAZTG

07-18-2003, 06:37 AM

Originally posted by web56n

http://web56n.free-host.com/construction.JPG [/B]

OK, a few questions. That Splat cutout is real Cool. What do you have it outlined with? How far back is the monitor going to sit? What are the size Specs on this cool MOD??:)

web56n

07-18-2003, 09:26 AM

Originally posted by TAZTG

OK, a few questions. That Splat cutout is real Cool. What do you have it outlined with? How far back is the monitor going to sit? What are the size Specs on this cool MOD??:)

the molding is made from blue clothes line wire.
once cut down the side I pulled out wire leaving a nice C shaped molding that can be simply pushed onto edge of cut out.

as for how far away is monitor!
if you sit directly in front of keyboard, the monitor is approx. 22" away. sounds like it's far but it's not.

size specs?
do you mean overall size or do you mean what kind of cpu and such?
if you mean size it shows all that in the first few drawings.
and if you mean cpu and such, well that will be reviled when I'm complete!

commanderkeen

07-18-2003, 10:14 AM

Can you give us a hint??? Is it going to be P4 or AMD??

Come on man, I won't tell anybody :D

web56n

07-18-2003, 10:57 AM

Originally posted by commanderkeen
Can you give us a hint??? Is it going to be P4 or AMD??

Come on man, I won't tell anybody :D
hmmm. let's just say you'd want to have seat belts handy!

TAZTG

07-18-2003, 11:01 AM

Originally posted by web56n

the molding is made from blue clothes line wire.
once cut down the side I pulled out wire leaving a nice C shaped molding that can be simply pushed onto edge of cut out.

as for how far away is monitor!
if you sit directly in front of keyboard, the monitor is approx. 22" away. sounds like it's far but it's not.

size specs?
do you mean overall size or do you mean what kind of cpu and such?
if you mean size it shows all that in the first few drawings.
and if you mean cpu and such, well that will be reviled when I'm complete!

I was asking for the Desk Size. http://www.hpphoto.com/servlet/LinkPhoto?GUID=4c5972bf-29fe-372a-33f0-1a442cb13e6a&size=
Thats a nice big Desk. That Splat looks sweet. Very ingenious using the Blue Clothes Wire. Looks Great,
web56n, you are an asset to the Modding Community keep up the good work.;)

web56n

07-21-2003, 07:57 PM

ok lost a day some where?

here I'm cutting out desk for splat window
http://www.yoshi.us/web56n/OIA/New%20Folder/deskwork.JPG

old keyboard will be replaced next up date!.....

http://www.yoshi.us/web56n/OIA/New%20Folder/morework.JPG

here is pic of insides, the gray acrylic is just a GUIDE, it does not stay there it gets replaced with a tinted piece.....
http://www.yoshi.us/web56n/OIA/New%20Folder/insides.JPG

also here is what it looks like with window in place

http://www.yoshi.us/web56n/OIA/New%20Folder/desktop.JPG

and a close up of window
http://www.yoshi.us/web56n/OIA/New%20Folder/window%20closeup.JPG

here it is at night
http://www.yoshi.us/web56n/OIA/New%20Folder/desknight.JPG
and
http://www.yoshi.us/web56n/OIA/New%20Folder/desknight%20close.JPG

will post more of rest shortly............
what do you think so far?

XP1800

07-21-2003, 08:23 PM

Dude it looks great so far, especially at night!

Only hardware I can make out is a Smartfan2, maybe an MSI mobo, and a NIC. What else you gonna put in there, or is that just a tester to see if everything fits? Also, is that a case that you just turned on its side?

web56n

07-21-2003, 08:32 PM

Originally posted by XP18004life
Dude it looks great so far, especially at night!

Only hardware I can make out is a Smartfan2, maybe an MSI mobo, and a NIC. What else you gonna put in there, or is that just a tester to see if everything fits? Also, is that a case that you just turned on its side?

yes just a case with side panel removed, it's on it's side and yes it's just for fitting the hardware is yet to be announced!

schultz

07-21-2003, 08:37 PM

that is looking so awesome man!!

i wish i had that skill in metal working! :) guess it just takes practice...

either way...can't wait to see the finished product man!

web56n

07-22-2003, 07:30 PM

ok here are some pics of what the whole thing will look like, I'm running behind by a day or so!
I still have a few more things to do
http://www.yoshi.us/web56n/OIA/New%20Folder/desktop%20com1.JPG

and at night

http://www.yoshi.us/web56n/OIA/New%20Folder/desktop%20night3.JPG
I will post more real soon.......

knuckles644

07-22-2003, 07:50 PM

when you're done...sell the whoel thing for $4000:D

Colossus

07-22-2003, 07:55 PM

That is amazing work!!!!

I like the intergration... However can you post some front bezel shots? I want to see the drive bays :)

Colossus

07-22-2003, 07:57 PM

From this shot I will say its an AMD not Intel :) With a ECS or MSI board :) (Guess)

http://web56n.free-host.com/insides.JPG

l_bastard

07-22-2003, 10:27 PM

Colossus, he said that that hardware is just for fitting....not the final stuff....so it could still be an intel rig

XP1800

07-22-2003, 10:34 PM

Is it me or is that monitor really high?

Also, does that keyboard tray slide underneath the desk?

It's looking better and better man, keep up the good work:)

bahocale

07-23-2003, 09:34 AM

Originally posted by XP18004life
Is it me or is that monitor really high?

Also, does that keyboard tray slide underneath the desk?

It's looking better and better man, keep up the good work:)

I am not sure, but the top of your monitor is supposed to be inline with your eyes.

web56n

07-25-2003, 01:08 PM

Ok I have been shut down by my provider..
they say over 10,000 hits an hour is toooo much, I've gotten over a million hits in the last 4 days.... wow!
that is why the pics aren't workin.. until I figure out some thing here is a link to see them
here (http://www.gruntville.com/phpBB2/viewtopic.php?t=3176)

Soldier_Of_Evil

07-25-2003, 01:32 PM

Dude...you were linked form HardOCP. Instant death :D

zackbass

07-25-2003, 03:10 PM

Just be thankful that you didn't get slashdotted!

TAZTG

07-25-2003, 03:21 PM

Nice Pretty Blue Lights. SPLAT Looking Good...:D

Adisharr

07-25-2003, 03:57 PM

Now this guy put some time into. that :)

Really really cool :cool:

DeadSanta

07-28-2003, 06:41 PM

Is it just me or are all those pictures broken? :(

PointlesS

07-29-2003, 01:50 PM

Originally posted by DeadSanta
Is it just me or are all those pictures broken? :(

Originally posted by web56n

Ok I have been shut down by my provider..
they say over 10,000 hits an hour is toooo much, I've gotten over a million hits in the last 4 days.... wow!
that is why the pics aren't workin.. until I figure out some thing

web56n

07-31-2003, 05:07 PM

got pic problem solved ........
here is a pic of monitor bezel notice the hole in the top center
http://www.yoshi.us/web56n/OIA/new%20bezel.JPG
I have cut a piece of acrylic and tinted it to match the front of monitor.
for a few reasons,
1-to cut down on reflection at night.
2-so when the monitor is shut off it appears to be silver.
3-and most important, to keep little fingers off the soft surface of monitor
(kids are always pointing at something on the monitor)
http://www.yoshi.us/web56n/OIA/tinted%20acrylic.JPG

this what it looks like with tinted acrylic in place
http://www.yoshi.us/web56n/OIA/monitor%20bezel.JPG
also here is a pic of where webcam is located
http://www.yoshi.us/web56n/OIA/to%20uplaod/webcam1.JPG
from far back
http://www.yoshi.us/web56n/OIA/to%20uplaod/webcam2.JPG
and close up
http://www.yoshi.us/web56n/OIA/to%20uplaod/webcam3.JPG
and also here is a pic of center speaker for that 5.1 dolby ya baby!!!
http://www.yoshi.us/web56n/OIA/to%20uplaod/centerspeaker.JPG
that's just a desktop background..longhorn.....
will post more real soon

MikeBuzzsaw

07-31-2003, 05:27 PM

damn its gettin hella nice.

web56n

07-31-2003, 06:00 PM

Operation: Integration Alumicoat, has to have a modded chair so here's a few pics
the chair from a 1990' pontiac, has arm rests on both sides.

http://www.yoshi.us/web56n/OIA/New%20Folder/the%20chair1.JPG
as you can see the right side arm rest has a stealthed fold out beverage holder along with a compartment for cd's.
both sides fold up out of the way for easy access, it also has been wired for 5.1 dolby digital! you can also see there is a lever to recline the chair if it's just relaxing time yeah it fully reclines too!

http://www.yoshi.us/web56n/OIA/New%20Folder/the%20chair.JPG

the speakers are mounted from under the head rest so if head rest goes up so do the speakers, they are also fully adjustable to any position.
here you can see a handy little compartment on the back for important what ever's.....

http://www.yoshi.us/web56n/OIA/New%20Folder/the%20chair%202.JPG

will be posting the finishing touches of Operation: Integration Alumicoat very soon........

knuckles644

07-31-2003, 06:12 PM

Hmmmm...that chair needs to be stained silver to match the desk...I don't think that wimpy tan color would fit.:)

web56n

07-31-2003, 10:01 PM

Originally posted by knuckles644
Hmmmm...that chair needs to be stained silver to match the desk...I don't think that wimpy tan color would fit.:)
it's just the pics, it is silver/gray

schultz

08-01-2003, 12:37 AM

that is so awesome man!! i'm so jealous. i was surprised by the chair! :D that is the coolest thing ever. i wish i had one of those! ;)

l_bastard

08-01-2003, 06:18 AM

so you going into mass production with this thing....?....lol...:D ....each time i see it it just keeps getting better.

can't wait to see it finished :eek:

TAZTG

08-01-2003, 06:35 AM

I have been a long time admirer of that Comfy Chair.
Few more questions to a KickA$$ Project.
How did you run the Wires for the speakers to the chair?
Is the webcam Adjustable or would you need to turn the monitor?
When your done with this project, what will you MOD next??

Nice Work
;)

LordOPain

08-01-2003, 07:58 AM

awsome... very, very nice job!

its makes my typewriter desk mod look cheap..lol
its far from finished, but itll not be that nicely engineered..

web56n

08-01-2003, 10:13 AM

Originally posted by TAZTG
I have been a long time admirer of that Comfy Chair.
Few more questions to a KickA$$ Project.
How did you run the Wires for the speakers to the chair?
Is the webcam Adjustable or would you need to turn the monitor?
When your done with this project, what will you MOD next??

Nice Work
;)

thanks....
first off the speakers wires run through inside chair and exit at bottom, they are then hooked up to a remote center for speakers via
RCA jacks. the remote center is then connected to computer using a digital optical cable.

the webcam is remotely controlled by using a 4-way power mirror essembly from a car, I have yet mounted the switch.

Nightlord

08-01-2003, 03:54 PM

OMFG! I've been keeping up with the project at Gruntville. This has got to be the most awesome setup I've ever seen. Don't let me find out where ya live... I'll have to pull a Delta Force mission to steal that thing. HAHA.

TAZTG

08-02-2003, 11:08 AM

Originally posted by web56n

thanks....
first off the speakers wires run through inside chair and exit at bottom, they are then hooked up to a remote center for speakers via
RCA jacks. the remote center is then connected to computer using a digital optical cable.

the webcam is remotely controlled by using a 4-way power mirror essembly from a car, I have yet mounted the switch.

Guess, you have to unplug those speakers when I come by and pick up the chair. Don't worry I will take good care of it. LOL
4-Way Power Mirror Assembly. Must have paid a visit to the Auto-Junk Yard for that, cool idea..;)

web56n

08-03-2003, 12:38 PM

Originally posted by Nightlord
OMFG! I've been keeping up with the project at Gruntville. This has got to be the most awesome setup I've ever seen. Don't let me find out where ya live... I'll have to pull a Delta Force mission to steal that thing. HAHA.
better hurry!
there's people hiding in the hedges already, just waiting for me to fall asleep! lol
in all seriousness thanks....................

web56n

08-04-2003, 11:07 PM

here are some more shot of Integration Alumicoat

first off the side vew
http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/New%20Folder/New%20Folder/WHOLE%20SET.JPG

here is a front shot
http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/New%20Folder/New%20Folder/FRONTAL%20C.JPG

and some of side

http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/New%20Folder/New%20Folder/New%20Folder/SIDE%20SHOT.JPG

and at night

http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/New%20Folder/New%20Folder/WHOLE%20SET%20N.JPG

also with matching printer in pic....

http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/New%20Folder/New%20Folder/WITH%20PRINTER.JPG

will finish up shortly..
thanks for all the comments,
I hope you's liked my work...........

XP1800

08-04-2003, 11:09 PM

*stands up and claps*

Excellent work man, simply excellent. By far the most creative computer projects I have seen so far, two thumbs up:cool:

So when are we gonna find out what kind of hardware is hiding under that desk?

web56n

08-04-2003, 11:36 PM

Originally posted by XP18004life
*stands up and claps*

Excellent work man, simply excellent. By far the most creative computer projects I have seen so far, two thumbs up:cool:

So when are we gonna find out what kind of hardware is hiding under that desk?

I've been asked to keep it hush hush, til
I get word to release that imformation! sorry

knuckles644

08-05-2003, 01:41 AM

Originally posted by web56n

I've been asked to keep it hush hush, til
I get word to release that imformation! sorry

Ohh....so you're working for the Russians comrade? (yea, yea, I know they're not communist...or are they....;) )

Adisharr

08-05-2003, 01:53 AM

Beautiful job man! I love it :)

tYteaZzAzN

08-05-2003, 05:36 AM

Ingenious work of art :eek:

lets just say this has been the first thread i've replied to in months ;)

I truly admire your incredibly adroit craftsmanship. I highly respect that :)

TAZTG

08-05-2003, 06:20 AM

Originally posted by web56n

better hurry!
there's people hiding in the hedges already, just waiting for me to fall asleep! lol
in all seriousness thanks....................

Damn, that salesman at Wal-Mart guaranteed me this Camoflauge would work!:mad: I didn't see anyone else out here in these bushes. Don't you ever sleep?? ;) BTW, that is a great work of art and merits a place in the Hall of Fame Thread. Congrats and hurry of with the Specs, we promise not to tell!!:cool: :cool:

Candyman

08-05-2003, 10:08 AM

Mmmmmmm...shiny...me want.... *drool*

Soooooo...when do you start on mine? ;)

web56n

08-05-2003, 03:17 PM

thanks everyone, will post internals of Integration Alumicoat soon I promise!
also thanks TAZTG wow I made hall of fame!

I will also be announcing design plans and first fabrication pics of,
" LUMINA WILDASH " coming soon to threads near you....

Hans Moleman

08-05-2003, 03:20 PM

It's a work of art man. I just wish you had a better looking chair, maybe something in grey leather wood look sexier.

web56n

08-05-2003, 04:02 PM

Originally posted by Hans Moleman
It's a work of art man. I just wish you had a better looking chair, maybe something in grey leather wood look sexier.

I looked high and low for a silver/ gray leather seat but I desided on a silver/gray cloth one instead, just because the one's I did find were all 60/40 split seats and that wouldn't have looked good at all.
besides this one is warm and comfy not cold and sticky

GoneRogue

08-05-2003, 04:13 PM

Beautiful. You have got some skills and imagination to put something like that together. ::applause::

Muk108

08-05-2003, 05:16 PM

Originally posted by web56n

I looked high and low for a silver/ gray leather seat but I desided on a silver/gray cloth one instead, just because the one's I did find were all 60/40 split seats and that wouldn't have looked good at all.
besides this one is warm and comfy not cold and sticky

so are you getting a new chair to go with it? or are you just reapalstering (sp) the one you have. you are and artist. *takes off hat and bows*

web56n

08-05-2003, 05:19 PM

Originally posted by Muk108

so are you getting a new chair to go with it? or are you just reapalstering (sp) the one you have. you are and artist. *takes off hat and bows*

no I'm just stating that the one you see is the one I'm using ...

TAZTG

08-05-2003, 05:50 PM

Originally posted by web56n
thanks everyone, will post internals of Integration Alumicoat soon I promise!
also thanks TAZTG wow I made hall of fame!

I will also be announcing design plans and first fabrication pics of,
" LUMINA WILDASH " coming soon to threads near you....

Thats not a problem, Thanks for taking the time and sharing your Alumicoat with all of us here at Sharky's and at GruntVille.
Can't wait for a sneak peek at Lumina Wildash...:p

Muk108

08-06-2003, 01:31 PM

Originally posted by web56n

no I'm just stating that the one you see is the one I'm using ...

welll i think you should reapalster it :D you know you want too!:p it would make the project complete. imo

web56n

08-07-2003, 01:31 AM

Originally posted by Muk108

welll i think you should reapalster it :D you know you want too!:p it would make the project complete. imo

sure I'll do that I'll do anything, to see how it turns out

Nightlord

08-08-2003, 10:25 AM

Everyone else is saying the same thing, but so what if your Ego explodes... Simply f u c k i n g AWESOME man. If I was rich, I'd hire you to make me one. haha That's the best looking setup of all time.

web56n

08-08-2003, 11:27 AM

Originally posted by Nightlord
Everyone else is saying the same thing, but so what if your Ego explodes... Simply f u c k i n g AWESOME man. If I was rich, I'd hire you to make me one. haha That's the best looking setup of all time.
thanks......
if that happen's I'll pick up all the pieces, and start over!
and
ya don't need to be rich in order for me to make ya one!
it wouldn't be that much.....

Captain Hook

08-08-2003, 02:01 PM

That is very very nice. Are you getting deals or sponsorships from hardware companies specifically for this computer?

Can you show us the cd drives up close? Those look pretty good too. Also, I'm worried about the speakers on that chair. I guess you could turn the volume down on them but otherwise your ears will nearly be touching the speakers. I know those ones can be really loud too. Still a very sick setup.

web56n

08-08-2003, 05:54 PM

Originally posted by Captain Hook
That is very very nice. Are you getting deals or sponsorships from hardware companies specifically for this computer?

Can you show us the cd drives up close? Those look pretty good too. Also, I'm worried about the speakers on that chair. I guess you could turn the volume down on them but otherwise your ears will nearly be touching the speakers. I know those ones can be really loud too. Still a very sick setup.

yes I am, they are providing me with hardware!
and the speakers can be controlled individually each speaker in this set have their own volume. 5.1 digital

web56n

08-11-2003, 04:12 PM

thanks.....
the equipment list for Integration Alumicoat......

the good people Here (http://www.networkstbay.com/)
have supplied me with these items, however I now have a slight problem!

http://www.hpphoto.com/servlet/LinkPhoto?GUID=6c5813fc-650e-37c6-5e89-5abc716e7827&size=

do I go with the Intel or the AMD?
the list consists of
soyo dragon 2 platinum edition mobo - Intel or AMD?
AMD2800+ or intel 2.4
1024mb 3200 ddr
other hardware will incude
480w thermaltake silent purepower
80 gig seagate serial ATA
Gainward F/X 5200 128mb 8x DVI, TV out
52x lite-on CD-RW
16x lite-on DVD-rom
3-80mm led case fans
thanks for your help!

TAZTG

08-11-2003, 05:19 PM

Does it really matter, both rigs would be awesome. Which ever you select is a matter of preference and we don't want to debate in this great Thread which is better (Intel or AMD). We all know that Intel is __________ then AMD. Thats the end of that debate. I would go with Intel over the AMD myslef but your opinion is what really matters.;)

web56n

08-11-2003, 05:59 PM

Originally posted by TAZTG
Does it really matter, both rigs would be awesome. Which ever you select is a matter of preference and we don't want to debate in this great Thread which is better (Intel or AMD). We all know that Intel is __________ then AMD. Thats the end of that debate. I would go with Intel over the AMD myslef but your opinion is what really matters.;)

thanks TAZTG,
the nice people decided to do this after they found out about not being able to enter the maxpc ROTM, whether I got into the mag or not!
I had other offers in the works but I went with these people.....

TAZTG

08-12-2003, 05:54 AM

I think that was real nice of them. I wish more stores would care about CS and be that cool. :D

web56n

08-14-2003, 03:13 AM

well I got good news ( my family and I are excited anyway!)
my mods of Integration Alumicoat is going to be on Techtv "The screen savers show"
it's in the works right now, will post more details soon......

benneke

08-14-2003, 04:27 AM

Originally posted by web56n
well I got good news ( my family and I are excited anyway!)
my mods of Integration Alumicoat is going to be on Techtv "The screen savers show"
it's in the works right now, will post more details soon...... i want to see that, but i cant, i live in belgium:(

TAZTG

08-14-2003, 07:13 AM

How about that, this will help the Modding Community. Great News.. Keep us posted for Show time etc..

schultz

08-14-2003, 08:49 PM

Originally posted by TAZTG
How about that, this will help the Modding Community. Great News.. Keep us posted for Show time etc..

definitely! that would be a definite watch!!

web56n

08-14-2003, 10:44 PM

thanks people,
don't have a specific time as of yet but.....
because I live in ontario canada, and their studio is in san fancisco
it is to hard to bring it there so they are considering a field shoot right at my house,(maybe)
and here after watching the show for many months daily, trying to get on with a live call.
I still can't believe it.....

Mike00

08-17-2003, 04:40 AM

Good luck getting on The Screensavers. I watch that show everyday and would love to see you and your work of art on tv. Great job with the mod. You have inspired me.

xBillx

08-17-2003, 09:42 AM

There's an article in the Washington Post today about modding that mentions this project (I think it is talking about this one).

http://www.washingtonpost.com/wp-dyn/articles/A1832-2003Aug16.html

web56n

08-17-2003, 03:24 PM

Originally posted by xBillx
There's an article in the Washington Post today about modding that mentions this project (I think it is talking about this one).

http://www.washingtonpost.com/wp-dyn/articles/A1832-2003Aug16.html
yes it is mentioning Integration Alumicoat!
it's a little overwelming that this has gone so far.
I did not expect this......
thanks to everyone...

web56n

08-17-2003, 10:02 PM

thanks
you can now see my mods in full at my new website
here (http://www.inmodwetrust.com/integration.php)
will be adding more of my mods soon.

Captain Hook

08-18-2003, 12:19 PM

Congratulations on the article in the washington post. That's no small town newspaper either. Again, nice work and I look forward to seeing some of your future projects. You are certainly one of the most skilled and talented modders I have ever seen. And from my provice too, even better!

Mancora

08-18-2003, 12:54 PM

How well does the keyboard work out? From the pic it looks like the keys are just about flush with the surface which seems like it might be a bit awkward.

Originally posted by web56n

here is a front shot
http://www.yoshi.us/web56n/OIA/New%20Folder/New%20Folder/New%20Folder/New%20Folder/FRONTAL%20C.JPG

web56n

08-18-2003, 05:15 PM

Originally posted by Mancora
How well does the keyboard work out? From the pic it looks like the keys are just about flush with the surface which seems like it might be a bit awkward.

they are flush, with little getting used to it seems to be fine,
for me anyway. mind you I'm not the best or fastest typer....

TAZTG

08-18-2003, 08:48 PM

Nice Article, Washington Post Yea Baby Yea.... I am assumng thats your rig they are talking about.

web56n

08-18-2003, 09:20 PM

Originally posted by TAZTG
Nice Article, Washington Post Yea Baby Yea.... I am assumng thats your rig they are talking about.

yes it is thanks, I never thought it would go that far..
I was getting ready to release drawings for the next adventure, but now it is going back to the designing table for some more revisions.

DeadSanta

08-18-2003, 11:17 PM

Originally posted by web56n
yes it is thanks, I never thought it would go that far..
I was getting ready to release drawings for the next adventure, but now it is going back to the designing table for some more revisions.

You are my hero. What's your take on adoption? How about giving this young boy a home? ;) :p :D

web56n

08-18-2003, 11:49 PM

Originally posted by DeadSanta
You are my hero. What's your take on adoption? How about giving this young boy a home? ;) :p :D

you got a dremel?
cause if we adopt, you can't touch my dremel.

DeadSanta

08-19-2003, 01:04 AM

Originally posted by web56n
you got a dremel?
cause if we adopt, you can't touch my dremel.

Right here, right here!!

http://leeked.net/~santa/dremel.jpg

I got a Prometeia too!!jiweqojkrne3qesd

knuckles644

08-19-2003, 02:51 AM

About the article in the washington post...was that OUR "web forum" tey mentioned?:D

Colossus

08-19-2003, 03:02 AM

I dont watch The screensavers, cause I think they suck... But I would watch it if you let us know what day it will air :)

Very nice clean work! I wanted to know more about the webcam and the 4way mirror...

web56n

08-19-2003, 03:17 AM

Originally posted by knuckles644
About the article in the washington post...was that OUR "web forum" tey mentioned?:D
may have been, but I think more they meant my website,
at least that's how the interview went down.....

web56n

08-19-2003, 03:32 AM

Originally posted by Colossus
I dont watch The screensavers, cause I think they suck... But I would watch it if you let us know what day it will air :)

Very nice clean work! I wanted to know more about the webcam and the 4way mirror...

I don't have pics of that at this time,
but I will explain how I did it and how it works.
the power mirrors from a cadillac was used.
there are four cables coming from a four disc motor each cable was attached to back of webcam, sort of like north south west east.
the switch powers the cable movement, each time a direction was pushed it would rotate a disc on the motor and that would move cable which would move webcam.
sorry hard to follow without pics.
it is all connected to a spare power supply.
the motor draws less than 3 amps unless left on for a long period of time or button held down for a long time.
I installed a inline fusable link using a 3 apm fuse to aviod any blow ups.
the only problem I found was that from where the webcam is located there is very little movement needed to change screen shot of webcam, so switch is very touchy.

DeadSanta

08-19-2003, 01:45 PM

Colossus

08-19-2003, 01:48 PM

hehehe yes :)

Well I dont like TSS because the old dude is an idiot! I watched him almost destroy a $4500 laptop because he wanted to remove parts while it was on!!!!

Plus his advice is usually inaccurate and false...

But whatever :D

I like a lot of things :)

But since I am a Cancer I am VERY picky! :D

Mancora

08-19-2003, 02:24 PM

TSS?

Colossus

08-19-2003, 02:25 PM

The Screen Savers...

commanderkeen

08-19-2003, 05:08 PM

Originally posted by Colossus
hehehe yes :)

Well I dont like TSS because the old dude is an idiot! I watched him almost destroy a $4500 laptop because he wanted to remove parts while it was on!!!!

Plus his advice is usually inaccurate and false...

But whatever :D

I like a lot of things :)

But since I am a Cancer I am VERY picky! :D

Yea, Leo LaPorte is not the person I would have chosen to host that show... it seems like he has read alot on the subject, but when it comes to really understanding the subject you have to get a hands on approach.

Colossus

08-19-2003, 08:46 PM

I dont mean to go offtopic :(

But he did have one of the new Alienware laptops that support an interchangable ATI 9600 or nVida 5600 video card... I think the idea is awesome.. But it weighs a ton... Over 10lbs!!!!

However I watched him show the laptop then closes the lid and flips it over and remove all the screws... I think one of the stage hands told him that he should power it off before he yanks out that card and fry the puppy....

So I would be careful around him...

I really liked CNET on TV... Oh well...

But keep us posted when you will air :)

dudewth

08-26-2003, 12:39 AM

Nice, but I think that reboot button is a bad idea. I know if my roommates saw that my computer wouldn't be on for more than 10 minutes :o

taggart6

11-12-2003, 03:15 PM

Sweet job...though your missing the ANY Key

speedyaxon

11-12-2003, 03:25 PM

as long as it's been dug up, congrats man! That is an awesome piece of engineering....and did you ever mention the specs of the comp inside it all? I must have missed it if you did...great job!:D

westside_connections

06-06-2004, 03:04 PM

good work but not that impressive...you ppl are exaggerate too much.. its just a simple hardware places in metal boxes, if u will. obviousle the guy has spent time on it but whats the point, knw im sayin...
but good thing you created.one thumb up.:D

score14thebigman

06-06-2004, 06:43 PM

scyther

06-07-2004, 08:48 AM

Wow, terrific project man! Looks so f*%#in sweeeeeeet!

TAZTG

06-07-2004, 09:23 AM

Originally posted by westside_connections
good work but not that impressive...you ppl are exaggerate too much.. its just a simple hardware places in metal boxes, if u will. obviousle the guy has spent time on it but whats the point, knw im sayin...
but good thing you created.one thumb up.:D

Excuse me but web56n put in alot of work on this project and to bring it up after all this time to give your rating wasn't required.

I don't mind you giving your opinion on someones MOD but you shouldn't comment on what others think of the same MOD. "you ppl are exaggerate too much"

Some friendly advice, if you don't have nothing constructive or positive to add then don't add nothing at all. Putting down other folks hard work isn't to cool.

Here was another example of your lameness which I let go because you came back to say "wot i mean is.. its luks good.."

Originally posted by westside_connections
I play HALF LIFE and ur case modification just put me right off. its luks so ugly. i mean it looks like some sort of centry old time machine with green active nuclear reactors inside or something..surely hard work without a doubt but a complete piece of garbage...now I DONT EVEN FEEL LIKE playing HALF LIFE thanks to ur modified case... :mad: :mad: :mad: :mad: :mad:

BTW: if your such a modding genius why not post yours.
Dude, take a Chill Pill and try being nice for a change..

Adisharr

06-07-2004, 10:23 AM

$10 says this guy wears a helmet at his PC..

steven1110

06-07-2004, 04:18 PM

This was the first time I saw this mod and I have to say WOW!! Westside, I have no idea what you where looking at but this is impressive. What did you do, cut you fan stamp out with a dremel? Now don't get me wrong though b/c I'm sure you cut that stamp out all nice and pretty. GIVE CREDIT WHERE CREDIT IS DUE.

Candyman

06-08-2004, 10:29 AM