Printable View
Ok,as the title says,my Win98 takes about 6min to load(you know,it shows the Win98 logo etc) and it's quite annoying. I think this started after I got my DSL installed, a ethernet card thinga ma jiggy was installed and some drivers. My comp's specs are : 600mhz Celeron,192MB RAM,10GB HD..ask if you need any other info,and please help me get this fixed.
I think its Win98 SE actualy,if it makes any diference,and the DSL has a dynamic IP.
that new NIC could have easily caseud a conflict w/ your interrupts
------------------
My Rig
how do I check for that/fix it
and any other suggestions?
You could also be experiencing delays in DHCP response. THat is how you get your Dynamic IP address as your machine boots... and if your NIC is requesting DHCP info, and not getting it, it will keep polling for DHCP info until it either:Quote:
Originally posted by hyperi0n:
I think its Win98 SE actualy,if it makes any diference,and the DSL has a dynamic IP.
1) Time out.
or
2) recv's the info.
Try removing your NIC, and de-installing your networking. THen boot your machine.
If it boots quiclky it is likely a networking issue with the Card. I wouldn't go to the resource conflict route just yet, but do make sure you are using the most current drivers for your NIC, and do not install the card next to the video card (that is almost always a resource conflict).
------------------
HTH!
Regards,
Tech-Daddy
Who is "General Error" and why is he reading my drive?
Tech Specs below:
-----------------
Abit BH6 (Rev 1.01)
Celeron 300A @ 450
256MB RAM
30GB Quantum Fireball
Herc 3D ProphetII MX
SB Live! Value
Ricoh MediaMaster cd\cdr\cdrw
Pioneer 40X slot load CD\DVD
Win2K Pro SP2
Cable to Ethernet LAN
I have a intergrated chipset or whatever..no video card