Help S.O.S, i dont understand what this means, i dont want a fried CPU.!

This is with regard to the Asus A7V266-E

Here is some help for all of you A7V266-E Owners. Most of this has been posted before, but not all in one place. Hope it helps you out...

**** {URGENT IMPORTANT INFO}****
Make sure that the CMOS CLR_RTC jumper is NOT connected when you power up. The manual is incorrect, and if you leave it connected you will DAMAGE the CMOS and perhaps Fry your CPU.

i dont understand what this means, if the manual is wrong, who shud i believe then?. abt to get this board this saturday , so before booting the system up, im gonna put the jumper in its correct position, so i want u guys to tell me where it shud be.



------------------
Primary Pc:
AMD Athlon 1400@1400 mhz 266FSB (tbird)[AYHJA(W) :) ]
Enermax Whisper 350W EG365P-VE(FC)
Toshiba SD-R1002 DVD/CDRW
Vantec 6035D w/evercool 32CFM fan with standard thermal paste
Asus A7V133-RAID(Revision 1.05) with Thermal take Blue ORB
Crucial CAS2 pc133 512megs SDRAM
Hercules 3D Prophet II 64MB (GForce 2 GTS)220 MHz core CPU speed and 360 MHz memory speed by default :)
MAXTOR DIAMONDMAX PLUS D740X 60GB 7200RPMATA133
48X Sony Cdrom
Sblive! Value
LG 17" Flat E700B
Secondary Pc:
Amd Athlon TBird 1.2 ghz 266FSB
ECS K7S5A
512MB PC2100 DDR Cas2.5
MSI GF2MX400 5ns VIVO

That is the jumper that you use to clear the CMOS. It defaults to the other position (only two) so you should be okay. The manual will tell you where it is, just make sure it isn't set to clear before you try booting up https://www.sharkyforums.com/images/.../2005/06/5.gif.

------------------
My Rig

Milhouse: "Remember when your dog ate my goldfish and you lied to me and said I never had a goldfish? Then why did I have the bowl Bart? Why did I have the bowl?"

[This message has been edited by Paladyr (edited January 10, 2002).]

Quote:

---

Originally posted by Paladyr:
That is the jumper that you use to clear the CMOS. It defaults to the other position (only two) so you should be okay. The manual will tell you where it is, just make sure it isn't set to clear before you try booting up https://www.sharkyforums.com/images/.../2005/06/5.gif.

---

Ok so the manual isnt incorrect right?....i pasted that from amdmb.com , they suggest that the manual is incorrect, but i will look into it and see where it shud be, what if it the manual is incorrect, and the mobo jumper was fine, and i put it to clear cmos, that would be a complete blunder...can any one else also confirm that the manual is OK ?