Printable View
I just bought a new PC, and I have the following problem:
When I turn off the pc (using start|shut down), the pc turns off normally
But... the monitor won't go off: There's a message on the screen saying that there's no inpu or something... What can this be??
It isn' t the monitor, because it worked with the previous PC!
pls help
Gert
this just means the monitor is no longer receiving a signal from the computer (because its shut down) and u can just turn it off. it will usually go into powersave mode after a while (orange light) dependign on what monitor it is. you can either leave it or turn off the monitor, just make sure to turn it back on when you start your pc again.
------------------
Antec sx830 300w
p3-1000eb coppermine
Abit VH6-II
384 mb generic pc133 cl3
Voodoo3 2000 at 175mhz
SBlive value
10x dvd, 2x2x6 cdrw
27 gig quantum 5400 ata 66
Viewsonic e790 19" crt
Win 2k pro / Progeny debian
"All we need is a little bit of energon and a lot of luck." - Optimus prime
You should get some kind of Power Control Strip and plug monitor and any external devices you have ie printer, scanner, etc. That way when you shutdown (Start/ShutDown) after the CPU turns off you can then turn the power strip off... https://www.sharkyforums.com/images/.../2005/08/2.gif
------------------
SYSTEM: KT7-Raid, 1.1G, Hercules Prophet III, 384Ram, SB Live Platinum 5.1, 20GB Maxtor ATA66/7200, 10GB Maxtor ATA33/5400, Acer 16xDVD, HP 9100 CD-Writer, Baybus, 3 Fans, "The Core" CPU Cooler, Rounded Cables, 19"NEC MultiSync Monitor...
Quote:
Originally posted by home skillet:
this just means the monitor is no longer receiving a signal from the computer (because its shut down) and u can just turn it off. it will usually go into powersave mode after a while (orange light) dependign on what monitor it is. you can either leave it or turn off the monitor, just make sure to turn it back on when you start your pc again.
but then you would be draining your BIOS CMOS battery, and once the battery is dead you have to reconfigure your entire BIOS.Quote:
Originally posted by TAZTG:
You should get some kind of Power Control Strip and plug monitor and any external devices you have ie printer, scanner, etc. That way when you shutdown (Start/ShutDown) after the CPU turns off you can then turn the power strip off... https://www.sharkyforums.com/images/.../2005/08/2.gif
------------------
The "other one"
1000EB
Taisol CGK742092 w/ 19CFM
Abit SA6
256MB Crucial PC133 222
Maxtor 13.6GB 7200RPM
Western Digital 20GB 7200RPM ATA100
Samsung 8x DVD
HP 10x4x32x CDRW
ATi Radeon 64DDR VIVO @ 243MHz Core/Mem
Turtle Beach Santa Cruz
Intel EtherExpress Pro/100 S NIC
Win98SE
nothing will drain the battery of the comos besides the internal clokc that is keep keeping it on at all tims inside and make sure that you bios data is saved next time you boot on. anyother deviced won't be draining from your battery. If so your battery will be long dead.Quote:
Originally posted by iamsostupid:
but then you would be draining your BIOS CMOS battery, and once the battery is dead you have to reconfigure your entire BIOS.
------------------
Proudly MIT
PIII 800@[email protected] VCore With Alpha PAL6035/Delta 38cfm
CUSL2@155/155/39 256MB Crucial 133 CL2@3/2/2 7/9
30MB IBM Deskstar
Raedon 32mb DDR 186/186
SoundBlaster Live value
------------------
Meaning of Life=Love
Let it find you and let it be found.