Search:
Type: Posts; User: SCUMBAG
Search:
Search took 0.02 seconds.
-
When you change the FSB, you also change the memory bus. They are related. So, are the PCI/AGP buses.
With a 4:5 divider, your CPU running at 2.5GHz/139MHz FSB, will have the memory running at...
-
You're welcome!
The first thing you should do it, write down all of your BIOS settings.
Your PSU is good, that is important. Stability issues may arise with a low 12v supply. Your temperatures are...
-
Here is a PCI/IRQ map for your motherboard.
PCI 1 is shared with PCI 5 and AGP
PCI 2 is shared qith PCI 6 and onboard audio
PCI 3 is shared with onboard lan
PCI 4 is shared with USB controller...
-
That's great.
Which slots do you have the cards installed?
-
Not knowning the previous configuration, I can't be certain if it's the TV card causing the problem.
Did you by any chance change the IRQ assignment when you altered the BIOS?
You could change...
-
Well, go back into Device Manager and select >view>resources by type>click the + next to "Interrupt Request". Look for your soundcard and see if there are any other devices sharing the interrupt...
-
Are you testing with Dolby Digital from a DVD? If you're using digital only, then you must enable digital only in the mixer.
-
Using the speakers you tested the 2.1 card with, connect them to the ANALOG outputs of the SoundBlaster. Do you have a LiveDrive?
-
Did you connect the old soundcard to your speakers?
-
Since you are getting sound from the analog output, you would at least be able to reproduce the sound from those channels. The problem lies elsewhere.
Do you have any other powered speakers to use...
-
Make sure the SoundBlaster is properly connected to the Inspire amplifier. Miniplug from SoundBlaster to DIN on the Inspire or use the analog outputs(miniplug front/rear) from the SoundBlaster to the...
-
If Device Manager shows the SoundBlaster, then connect some headphones to the output of the soundcard and check for sound. The connector is usually green.
If Device Manger shows something else, then...
-
JustWhitman:
Why don't you try backing off the FSB? Is your memory OC'd as well? Try 133/166 or 100/166 and see if it still fails. I have experienced the same symptoms when the VDIMM was too low for...
-
From Partition Magic 7.0:Types of Partitions
There are three types of partitions:
Primary Partitions
Extended Partitions
Logical Partitions
Primary and extended partitions...
-
I have a GF4w/VIVO and it's Video-In is less than good. I've used an AverTV Studio as the TV/Capture card, it's image quality is much better. I have never used an ATI card, so I can't comment on...
|
|