-
Will the Asus P5W DH Deluxe (975X) board handle the new 1333 MHz FSB CPUs?
I have one of those boards in a system I built a couple months back. I dropped an e4300 in it as a stopgap measure to wait for the Intel price cuts, particularly eying the Q6600 @ $266. However, some of the new 1333 FSB processors have caught my eye, not because of the FSB (useless) but because of the price/performance ratio. Does anyone know if the 975X chipset in general and my board in particular will handle these new CPUs?
One by one, the penguins are stealing my sanity.
-
...
well, officially they don't support a fsb of 333 but every board can handle it. You might need a bios update to get it work and set the fsb manually.
----------
Intel QX6700 Tuniq Tower (3,30Ghz) |Intel D975XBX2 |4x 1GB OCZ Platinum XTC DDR2-6400
Gigabyte 8800Ultra OC'd to (650/2200/1605)| X-fi XtremeGamer Fatal1ty Pro | Dell 2005 FPW
Lian-Li v1000 plus| Silverstone ST56ZF 560W |WD Raptor 150GB |2x Seagate 7200.10 320GB
----------
-
Originally Posted by Reign
well, officially they don't support a fsb of 333 but every board can handle it. You might need a bios update to get it work and set the fsb manually.
Yeah, I currently have the board running at 380 MHz, so 333 MHz is not a concern. I am more worried about some of the nasty things intel has pulled in the past like changing VRM requirements and suchlike which breaks compatibility with older motherboards.
One by one, the penguins are stealing my sanity.
-
...
well i don't think that's the case with the E6x00 to the E6x50. Not 100% sure though.
now i come to think of it. Are you sure your board supports Quadcore, since intel did a upgrade to the Badaxe (x975 board from intel itself) and named it badaxe 2. Only the Badaxe 2 supports quacore. And is slightly different hardware wise.
----------
Intel QX6700 Tuniq Tower (3,30Ghz) |Intel D975XBX2 |4x 1GB OCZ Platinum XTC DDR2-6400
Gigabyte 8800Ultra OC'd to (650/2200/1605)| X-fi XtremeGamer Fatal1ty Pro | Dell 2005 FPW
Lian-Li v1000 plus| Silverstone ST56ZF 560W |WD Raptor 150GB |2x Seagate 7200.10 320GB
----------
-
Hammerhead Shark
Seems to me that Un4given just put a system together with that board and a Q6600, so I'm pretty sure it supports quads.
-
Originally Posted by Brahma
Seems to me that Un4given just put a system together with that board and a Q6600, so I'm pretty sure it supports quads.
Yes, the quads are supported. I am just not sure about the E6X50 processors.
One by one, the penguins are stealing my sanity.
-
Great White Shark
On the front of my box it says it supports the 1333MHz FSB processors. However, unless Intel made a very large change to the VRM, I don't see any problems.
My guess is that a BIOS update is all that will be required.
Prince of the OC Crusaders
Intel i7 3.2GHz @ 4.24GHz
Cooler Master V8
Asus P9X79 Pro
16GB Patriot Viper Extreme DDR3-1600 (quad channel)
HIS R9 290X @1050MHz
Asus 20x DVD-RW DL DVD-RW
-
Originally Posted by s1203372
I have one of those boards in a system I built a couple months back. I dropped an e4300 in it as a stopgap measure to wait for the Intel price cuts, particularly eying the Q6600 @ $266. However, some of the new 1333 FSB processors have caught my eye, not because of the FSB (useless) but because of the price/performance ratio. Does anyone know if the 975X chipset in general and my board in particular will handle these new CPUs?
Yes the P5WDH Dlx supports the QX6850 with an update to bios 2205. HERE is the supported CPU list and bios required.
-
Mako Shark
Originally Posted by RealBeast
Yes the P5WDH Dlx supports the QX6850 with an update to bios 2205. HERE is the supported CPU list and bios required.
Quite a few people are having issues with that 2205 BIOS.
Cannot adjust vcore seems to be a common complaint from those who have upgraded to 2205 and flashed back to previous BIOS versions.
Case: Cooler Master HAF 932 Full Tower Motherboard: ASUS P8P67 Deluxe CPU: Intel Sandy Bridge 2600K 3.4GHz @ 5.0GHz (Coolermaster V8 Cooler) RAM: 8GB Corsair Dominator DDR3 PC12800 Video Card: EVGA GeForce GTX460 Sound Card: Creative X-Fi Xtreme Audio Monitor: HP 2711x (27” LED) SSD: 120GB OCZ Vertex 4 PSU: Silverstone Strider Plus 1000W
-
Originally Posted by Nemesys
Quite a few people are having issues with that 2205 BIOS.
Cannot adjust vcore seems to be a common complaint from those who have upgraded to 2205 and flashed back to previous BIOS versions.
I had no issues with 2205 and can adjust the vcore.
-
Astronomy Shark
The only issue I have with 2205 is that it won't remember some settings. I turn off the integrated sound, restart, and it's back on again. Things like that.
My board has recently started giving me this screen saying my bios is corrupt and bios recovery is starting everytime I try to boot higher than ~385 on the fsb however. This happened before I loaded 2205 though.
My Current System
C2Q Q6700 @ 3.4Ghz, 1.31v | Zerotherm NV120 Nirvana | Asus P5W DH | 4GB Corsair G-Skill PC6400 | 1GB HIS IceQ4 4870 Turbo | X-Fi Xtrememusic | Megaworks 650 6.1 | 500GB WD SE16 | Corsair TX750W | TT Tsunami | Log. MX3100 Duo | Dell 2007WFP | Vista HP x64
3d05 - 20025 | 3d06 - 15570
My Heatware | My Rig Pics/OC | Sharkyforums 3dmark Team |
Currently Playing- DoW:2, UT3, TF2, NWN2
-
Mako Shark
Originally Posted by RealBeast
I had no issues with 2205 and can adjust the vcore.
Some are having issues with the 2205 BIOS, as documented on pages 210 and 211 of the Asus P5W DH - Problems + Fixes Thread.
http://www.xtremesystems.org/forums/...10193&page=211
Those who have documented issues have all reflashed back to previous BIOS versions.
Case: Cooler Master HAF 932 Full Tower Motherboard: ASUS P8P67 Deluxe CPU: Intel Sandy Bridge 2600K 3.4GHz @ 5.0GHz (Coolermaster V8 Cooler) RAM: 8GB Corsair Dominator DDR3 PC12800 Video Card: EVGA GeForce GTX460 Sound Card: Creative X-Fi Xtreme Audio Monitor: HP 2711x (27” LED) SSD: 120GB OCZ Vertex 4 PSU: Silverstone Strider Plus 1000W
-
Mako Shark
Originally Posted by speedyaxon
The only issue I have with 2205 is that it won't remember some settings. I turn off the integrated sound, restart, and it's back on again. Things like that.
My board has recently started giving me this screen saying my bios is corrupt and bios recovery is starting everytime I try to boot higher than ~385 on the fsb however. This happened before I loaded 2205 though.
Precisely, this issue has been experienced by others as well.
In the link below, the poster (k0nsl) has the exact same problems you are having.
It is post #5255 from the thread I posted above.
There are serious issues with this BIOS version, but then again it is Beta.
I never flash Beta BIOS. I simply wait until they are matured and all the bugs fixed.
http://www.xtremesystems.org/forums/...postcount=5255
Case: Cooler Master HAF 932 Full Tower Motherboard: ASUS P8P67 Deluxe CPU: Intel Sandy Bridge 2600K 3.4GHz @ 5.0GHz (Coolermaster V8 Cooler) RAM: 8GB Corsair Dominator DDR3 PC12800 Video Card: EVGA GeForce GTX460 Sound Card: Creative X-Fi Xtreme Audio Monitor: HP 2711x (27” LED) SSD: 120GB OCZ Vertex 4 PSU: Silverstone Strider Plus 1000W
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|