My 800D Build

[Timman_24]

Finally got some time to share with you guys my new build. Same components, but new case and fans. I'm collecting some WCing stuff at the moment too. I have about half of the stuff I need to get that going, so I'll update this as I make progress.

The Corsair 800D is by far my favorite case that I have worked with. The install was a breeze and the quality was as expected from a 200+ dollar case. I only wish it had a wheel option because this thing is damn heavy and big.

Monolithic, looks like necron would come out of this thing:


I really like this Lamptron Fancontroller. It matches well and works great.


Look ma! No wires! It was a real treat to install my system on a computer with so much space and great cable management:


Yate Loon fans ready for a radiator:


This thing is screaming for SLI:


Requisite dark shot. I'm planning on an elaborate LED scheme later:


Lamptron display:


There we go. I have some Watercooling parts right now that include:

• DDC-1 Pump
• EK FC470GTX GPU Waterblock
• EK 250mm Reservoir
• XSPC Raystorm CPU Waterblock

I still need a radiator, tubing, fittings, and coolant. Can't wait to get this 470 under water. I've seen them overclock to 570 speeds with watercooling!

[kujoe2002]

beautiful case. But mad expensive...

[Timman_24]

beautiful case. But mad expensive...

$240? I didn't think that is too bad, but I keep my cases for 6+ years so its a small investment over that period of time. I know some people that update the case every build. That would get expensive!!!

I just placed an order for the rest of my WC parts!

From Sidewinder:
13x Bitspower True Silver 3/8 IN, 1/2 OD Comp
14ft Tygon 3/8-1/2 Tubing
EX360
Thermochill EC6 UV Blue
2x Bitspower Shining Silver Seal Plug and clamps
CCFL Blue light kit

From Jabtech:
XSPC 355 acrylic top

I also have a waterblock on order from amazon. I'll provide a build up once I get my goodies.

[simsim44]

Nice box. looked at that today, ended up with the Chaser MK 1, from Thermal Take, it was closer to my bugdet, the 800D was 249.00, nice case though I see you have a Corsair cooler is that the 60 or 80 series, I like the Idea of it being closed system.

[Timman_24]

Nice box. looked at that today, ended up with the Chaser MK 1, from Thermal Take, it was closer to my bugdet, the 800D was 249.00, nice case though I see you have a Corsair cooler is that the 60 or 80 series, I like the Idea of it being closed system.

It is an H60, which may be for sale soon It is a pretty good unit. I was pleased with the performance.

[James]

Damn clean install Timman. Hats off to you.

Did you find you needed different cables to give you the length you needed to route properly?

[Timman_24]

Damn clean install Timman. Hats off to you.

Did you find you needed different cables to give you the length you needed to route properly?

I was surprised that I didn't need any, although the case did come with extenders for the 8 pin CPU plug but I did not need to use them. I'd like to go crazy sleeving, but I don't really have the time for it right now.

[kujoe2002]

$240? I didn't think that is too bad, but I keep my cases for 6+ years so its a small investment over that period of time.

Yea.. That's more then double what I can afford:

APEVIA X-TELSTAR-AL Silver Aluminum ATX Full Tower

I may go with: APEVIA X-JUPITER G-Type X-JUPITERG-BK

as its cheap and has what I need. I'd actually like to get:


COOLER MASTER HAF 932


but I think it's a tad over my budget. I know they say you get what you paid for but 200+ for a case?

[simsim44]

Damn clean install Timman. Hats off to you.

Did you find you needed different cables to give you the length you needed to route properly?

Yes very clean, I just finished my own, not an 800D but it'll work

[Timman_24]

You should see one in person and work with one to really see the difference. Take for example, the 800D has hot swappable front bays:



This case is massive as well and weighs over 40lbs. Every edge is covered in rubber or nicely rolled. It is just a different class. It is hard to describe without you seeing one.

But seriously, if you think about how much engineering, design, materials, and manufacturing time goes into making a high end case then the 240 doesn't seem too bad.

Silverstone makes some killer cases as well. Check out the RV01, RV02, or RV03 for a lower end Silverstone. Those are really nice.

[simsim44]

boxes have come along way. it is true once you start puting it together you start to realize why it cost so much. I noticed that with this Chaser MK1, someone spent alot of time thinking things through

[simsim44]

I will have to start a thread first I gotta upload the pix from my HTC inspire

[Timman_24]

I will have to start a thread first I gotta upload the pix from my HTC inspire

Definitely, I'd love to see your build.

[kujoe2002]

You should see one in person and work with one to really see the difference. Take for example, the 800D has hot swappable front bays:



This case is massive as well and weighs over 40lbs. Every edge is covered in rubber or nicely rolled. It is just a different class. It is hard to describe without you seeing one.

But seriously, if you think about how much engineering, design, materials, and manufacturing time goes into making a high end case then the 240 doesn't seem too bad.

Silverstone makes some killer cases as well. Check out the RV01, RV02, or RV03 for a lower end Silverstone. Those are really nice.

This, I like. Would making swapping so much easier

[Vindir]

Your case and Simsim's both make me want to upgrade.