-
Windows 7 freezes with other hard drive connected
One of my pc's failed to post or even power on any fans after a house move.
So i've taken the hard drive out of it and connected it to another pc with a view toward copying data off.
I've got 3 other hard drives in this pc and they all work fine.
When i connect the hard drive concerned, via SATA (all the hard drives are SATA), Windows freezes at the Windows is Starting screen.
When I disconnect the suspect hard drive, all is fine.
Tried swapping the sata cables but it's the same..
Bad hard drive?
-
Mako Shark
Since it's sata, you can plug and unplug while switched on.
With the pc off, connect the drive power but not the sata cable, boot in to safe mode and then plug in the sata cable on the suspect drive. You should then be able to run a chkdsk on it or copy data off it.
I would run a chkdsk on it first though.
Compaq A910em: T2330 dual core 1.6Ghz, X3100 384MB GPU, 160GB sata HDD, 2GB RAM
Gaming rig: Asus Striker II, Coolermaster GX 750w, E4600 @ 2.4Ghz, 2.5GB RAM, Zerotherm FZ 120, 9500GT 1GB
Server: Mac mini running W23k Server - 1.8Ghz dual-core, 1GB RAM, 1x80GB, 2x500GB externals + LTO1 tape backup
An important petition, regarding your human rights:
https://www.change.org/en-GB/petitio...r-both-genders
-
Originally Posted by wh666-666
Since it's sata, you can plug and unplug while switched on.
With the pc off, connect the drive power but not the sata cable, boot in to safe mode and then plug in the sata cable on the suspect drive. You should then be able to run a chkdsk on it or copy data off it.
I would run a chkdsk on it first though.
A quick note: SATA hotplug only works if AHCI is enabled in the BIOS. If it is running in IDE or legacy mode, hotswap is not supported at all.
Crusader for the 64-bit Era.
New Rule: 2GB per core, minimum.
Intel i7-9700K | Asrock Z390 Phantom Gaming ITX | Samsung 970 Evo 2TB SSD
64GB DDR4-2666 Samsung | EVGA RTX 2070 Black edition
Fractal Arc Midi |Seasonic X650 PSU | Klipsch ProMedia 5.1 Ultra | Windows 10 Pro x64
-
Have you considered doing a quick and extended test of the drive using the manufacturers diagnostic software? If you haven't then you might want to consider that option.
It might also be a good idea to go out and get a replacement drive if you need it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|