------------------
My computer's spec:
Custom-made b!tch
512MB PC146 CAS2, another 256MB coming in Tuesday
A7V133-R, failed going to RMA it and get an ABIT KT7-A.
1.3GHz AXIA T-Bird B core @ 1.46GHz w/ 1.85v (seems to be the limit of this thing, 1.47GHz gives me instabilities) GeForce2 MX, Visiontek GeForce3 and GeForce256 SDR both doesn't work, suspecting a mobo failure.
SoundBlaster Live! X-Gamer 5.1
Acer 16X DVD and 16x/10x/40x Plextor CDRW
2 40GB WD 7200RPM RAID 0 (hopefully, hasn't done it yet)
TEAC Floppy
Swiftech MC-462 (ETA Monday)
OCZ Implosion-900 w/ 570 cfm of air w/ 650W Enermax PSU
19" Dell monitor
Win2K Pro
I bought this new panasonic cordless phone at 2.4 gigahertz... well now it has a 120mm sunon growing out of its side and is currently running at 2.8, I hope to hit 3.0 once the watercooling arrives..
edit: I just added a fop38, temps now at a decent 30c while idle and 90c while my wife blabs away on the damn thing...I told her to keep it down to a light chat until I get some better cooling..
Originally posted by Darth: I bought this new panasonic cordless phone at 2.4 gigahertz... well now it has a 120mm sunon growing out of its side and is currently running at 2.8, I hope to hit 3.0 once the watercooling arrives..
And I'm still w/ my 900MHz telephone...
------------------
My computer's spec:
Custom-made b!tch
512MB PC146 CAS2, another 256MB coming in Tuesday
A7V133-R, failed going to RMA it and get an ABIT KT7-A.
1.3GHz AXIA T-Bird B core @ 1.46GHz w/ 1.85v (seems to be the limit of this thing, 1.47GHz gives me instabilities) GeForce2 MX, Visiontek GeForce3 and GeForce256 SDR both doesn't work, suspecting a mobo failure.
SoundBlaster Live! X-Gamer 5.1
Acer 16X DVD and 16x/10x/40x Plextor CDRW
2 40GB WD 7200RPM RAID 0 (hopefully, hasn't done it yet)
TEAC Floppy
Swiftech MC-462 (ETA Monday)
OCZ Implosion-900 w/ 570 cfm of air w/ 650W Enermax PSU
19" Dell monitor
Win2K Pro
Yes I can tell you a story ) only kidding. I bought my first pc 1.5 years ago and it was a PII 400 on Abit BE6. I didn't now about the oc thing for a year but when I was aware of it I read some good articles about it. So I replaced my 64 mb pc100 ram with a 128 pc 133 and it did 533 easily (2.1 V but 62 C !! when the case was closed ) So I added another fan on the hs and applied thermal paste. This way I could do 560 !! @2.1V so easily. I thing I was very lucky because PII 400's usually don't oc .I had 150 fsb after 140 on my BE6 so when I chose 150 it would post but failed during loading windows. I thing it could do 600!! ( making 560 only @2.1V) but I suppose my ram wasn't doing 150.
I sold it a month ago for 50$ and bought a celeron 600 with asus slotket for 60$ from a friend . It did 900@1.75 and 945@1.80 with the intel fan on it. But this week a made someting like this ( http://www.phamcomputer.com/enermax/...sperkit01.html
--but also added a fan on the other end )
of cartoon and some tape. It worked great. Before my temps were like 50-51 and 45-46 (case open) and now it's 40-41C ( all full load temps) (room temp is 25 btw) And it can do 900@1.65V . So that's my oc story
And only one of those is mine. The crappiest one too.
hey can i ask you a quick question about the p3 1000eb - what voltage did you have it at to get 1200 mhz? cause the highest i can get is 1185 mhz (158 X 7.5) and that is at 1.9v. i only have the stock intel hsf but the temps are still below 50. i thought i might be able to get 1200 mhz by upping the vcore to 1.95v but im too scared to fry my chip with that. great oc.
------------------
Antec SX830 Workstation Midtower
Intel Pentium III 1GHz
Abit VH6-II (Via Apollo Pro 133A)
384 MB Generic PC133 CAS3
Voodoo 3 2000 AGP (i know...) OC'd to 175 MHz
Quantum 27 Gig 5400 RPM UDMA 66
SBLive! Value
10x DVDROM, 2x2x6 Memorex CD-RW (ghetto)
Viewsonic E790 19"
Windows 2K Pro / Progeny Debian
"Is not love not unlike the unlikely not it is unlikened to?" - Leon Phelps
"When My mama ask me will I ever change, I tell her yeah... But it's clear I will always be the same until the end of time..." -2pac Shakur, The greates rapper of all time
All you haters keep hating, because the rings are coming back to the Lakers! -Tio Chaharbaghi
------------------
My computer's spec:
Custom-made b!tch
512MB PC146 CAS2, another 256MB coming in Tuesday
A7V133-R, failed going to RMA it and get an ABIT KT7-A.
1.3GHz AXIA T-Bird B core @ 1.46GHz w/ 1.85v (seems to be the limit of this thing, 1.47GHz gives me instabilities) GeForce2 MX, Visiontek GeForce3 and GeForce256 SDR both doesn't work, suspecting a mobo failure.
SoundBlaster Live! X-Gamer 5.1
Acer 16X DVD and 16x/10x/40x Plextor CDRW
2 40GB WD 7200RPM RAID 0 (hopefully, hasn't done it yet)
TEAC Floppy
Swiftech MC-462 (ETA Monday)
OCZ Implosion-900 w/ 570 cfm of air w/ 650W Enermax PSU
19" Dell monitor
Win2K Pro
Originally posted by home skillet:
hey can i ask you a quick question about the p3 1000eb - what voltage did you have it at to get 1200 mhz? cause the highest i can get is 1185 mhz (158 X 7.5) and that is at 1.9v. i only have the stock intel hsf but the temps are still below 50. i thought i might be able to get 1200 mhz by upping the vcore to 1.95v but im too scared to fry my chip with that. great oc.
1.95V. I couldn't get any higher no matter what the voltage, the main thing holding me back with that chip was the POS generic PC133 memory, and memory couldn't be set asyncronously.
Don't worry, up until and including 2V should be fine for air cooling, and the heatsink/fan that comes with the P3 1 GHz is pretty good. Extreme maximum (according to Intel) is 2.1V, but I wouldn't go that high.
Originally posted by tio2k: the duron cant hit 1ghz?
Well it's my sisters, and I only had it at 1.8V, didn't want to stress it too much. I think it could have gone higher, but I only played around with that system for half an hour. She still doesn't know it's overclocked.
Originally posted by Mandorallen of Molynnr: 1.95V. I couldn't get any higher no matter what the voltage, the main thing holding me back with that chip was the POS generic PC133 memory, and memory couldn't be set asyncronously.
Don't worry, up until and including 2V should be fine for air cooling, and the heatsink/fan that comes with the P3 1 GHz is pretty good. Extreme maximum (according to Intel) is 2.1V, but I wouldn't go that high.
Do not get CUSL2-C tho if you plan to oc to 1.2GHz; it has cold-boot problems.
------------------
My computer's spec:
Custom-made b!tch
512MB PC146 CAS2, another 256MB coming in Tuesday
A7V133-R, failed going to RMA it and get an ABIT KT7-A.
1.3GHz AXIA T-Bird B core @ 1.46GHz w/ 1.85v (seems to be the limit of this thing, 1.47GHz gives me instabilities) GeForce2 MX, Visiontek GeForce3 and GeForce256 SDR both doesn't work, suspecting a mobo failure.
SoundBlaster Live! X-Gamer 5.1
Acer 16X DVD and 16x/10x/40x Plextor CDRW
2 40GB WD 7200RPM RAID 0 (hopefully, hasn't done it yet)
TEAC Floppy
Swiftech MC-462 (ETA Monday)
OCZ Implosion-900 w/ 570 cfm of air w/ 650W Enermax PSU
19" Dell monitor
Win2K Pro
Originally posted by Mandorallen of Molynnr: Well it's my sisters, and I only had it at 1.8V, didn't want to stress it too much. I think it could have gone higher, but I only played around with that system for half an hour. She still doesn't know it's overclocked.
YOU BAD BROTHER!!! ehhehehee
------------------
11 year old OC'er
School Sucks, deal with it!
"When My mama ask me will I ever change, I tell her yeah... But it's clear I will always be the same until the end of time..." -2pac Shakur, The greates rapper of all time
All you haters keep hating, because the rings are coming back to the Lakers! -Tio Chaharbaghi
Originally posted by tio2k: YOU BAD BROTHER!!! ehhehehee
I once oc my mom's work machine from 400 to 450 (PII), and my mom never noticed it
I think the temp was in the mid 60s cus it had no case cooling whatsoever
------------------
My computer's spec:
Custom-made b!tch
512MB PC146 CAS2, another 256MB coming in Tuesday
A7V133-R, failed going to RMA it and get an ABIT KT7-A.
1.3GHz AXIA T-Bird B core @ 1.46GHz w/ 1.85v (seems to be the limit of this thing, 1.47GHz gives me instabilities) GeForce2 MX, Visiontek GeForce3 and GeForce256 SDR both doesn't work, suspecting a mobo failure.
SoundBlaster Live! X-Gamer 5.1
Acer 16X DVD and 16x/10x/40x Plextor CDRW
2 40GB WD 7200RPM RAID 0 (hopefully, hasn't done it yet)
TEAC Floppy
Swiftech MC-462 (ETA Monday)
OCZ Implosion-900 w/ 570 cfm of air w/ 650W Enermax PSU
19" Dell monitor
Win2K Pro
OC success stories
Reply With Quote
(seems to be the limit of this thing, 1.47GHz gives me instabilities)
) only kidding. I bought my first pc 1.5 years ago and it was a PII 400 on Abit BE6. I didn't now about the oc thing for a year but when I was aware of it I read some good articles about it. So I replaced my 64 mb pc100 ram with a 128 pc 133 and it did 533 easily (2.1 V but 62 C !! when the case was closed ) So I added another fan on the hs and applied thermal paste. This way I could do 560 !! @2.1V so easily. I thing I was very lucky because PII 400's usually don't oc .I had 150 fsb after 140 on my BE6 so when I chose 150 it would post but failed during loading windows. I thing it could do 600!! ( making 560 only @2.1V) but I suppose my ram wasn't doing 150. 
Bookmarks