finally broke 9k on 3dmark!

Sharky Forums


Results 1 to 12 of 12

Thread: finally broke 9k on 3dmark!

  1. #1
    Evil Monkey Shark thebove's Avatar
    Join Date
    Nov 2001
    Location
    West Bloomfield, MI
    Posts
    6,819

    Post finally broke 9k on 3dmark!

    made it....i've decided i definately need some better cooling though as i had to prop up an extra case fan pointing at my ti500 to get it to go, and i'm also kinda amazed i made it to 9k with my rig sitting on a 4.79 5v rail....but i got it...not as high as kjy9 or mystifmagic, but i said i'd get there, and i made it....score is 9004. here's the compare link. system below was clocked at 1668 (145x11.5) and the ti500 was at 258/584 w/23.11 drivers.

    ------------------
    Aopen H600a case w/300W Aopen psu
    Athlon XP 1800 @ 1656 (fsb@144)
    Epox 8kha+
    512MB Micron PC2100 @2-2-2 timings
    PNY Geforce3 Ti500
    SB Live MP3+
    HP 10x4x32
    Acer 50x
    Maxtor D740x 40GB
    WD 5400rpm 30GB
    Win2k Pro
    Abit IP35 Pro - Core2Duo E8400 - 4GB Crucial Ballistix 1066 - ATI 4850HD
    - 2xRaptor 150GB RAID-0


    Dave? Dave?! Dave's not here...

  2. #2
    Hammerhead Shark FS740's Avatar
    Join Date
    May 2001
    Location
    emerald city
    Posts
    1,278

    Post

    if you used the 21.83s or 21.85s you might get a better score =)

    ------------------
    anyone play starcraft still? or cs/diablo2?

  3. #3
    Evil Monkey Shark thebove's Avatar
    Join Date
    Nov 2001
    Location
    West Bloomfield, MI
    Posts
    6,819

    Post

    Originally posted by FS740:
    if you used the 21.83s or 21.85s you might get a better score =)

    haven't tried any of the 21.xx drivers, though i did try several versions of the 22.xx drivers and only had worse scores, so i just stuck with the 23.11s

    ------------------
    Aopen H600a case w/300W Aopen psu
    Athlon XP 1800 @ 1656 (fsb@144)
    Epox 8kha+
    512MB Micron PC2100 @2-2-2 timings
    PNY Geforce3 Ti500
    SB Live MP3+
    HP 10x4x32
    Acer 50x
    Maxtor D740x 40GB
    WD 5400rpm 30GB
    Win2k Pro
    Abit IP35 Pro - Core2Duo E8400 - 4GB Crucial Ballistix 1066 - ATI 4850HD
    - 2xRaptor 150GB RAID-0


    Dave? Dave?! Dave's not here...

  4. #4
    5 Loaves and Two Fish KJY9's Avatar
    Join Date
    May 2001
    Location
    Temporarily assigned to earth!
    Posts
    8,252

    Post

    Originally posted by thebove:
    made it....i've decided i definately need some better cooling though as i had to prop up an extra case fan pointing at my ti500 to get it to go, and i'm also kinda amazed i made it to 9k with my rig sitting on a 4.79 5v rail....but i got it...not as high as kjy9 or mystifmagic, but i said i'd get there, and i made it....score is 9004. here's the compare link. system below was clocked at 1668 (145x11.5) and the ti500 was at 258/584 w/23.11 drivers.

    Yikes! Nice score...I couldn't get out of the 8,000's with the 2311's...I had to use the 2250's to break 9000. It seems like different cards perform better with different drivers.

    ------------------
    Take this link to send mail to our boys in Afghanistan.
    http://www.anyservicemember.org/
    KJY9's Rigs
    Whoever said "ignorance is bliss"??
    Compare 3DMark

  5. #5
    Great White Shark d_k's Avatar
    Join Date
    Oct 2001
    Posts
    5,456

    Post

    Thats excellent

    ------------------
    My Gaming PC

    _Enermax Black Server Tower Case with 330 watt PSU and 3 case fans.
    [ Exact case as Alienware]
    _Soyo Dragon Plus Motherboard with RAID and LAN Via KT266A
    _AMD Athlon XP Pr1800+ 1.53ghz retail
    _Crucial 256mb Pc2100 DIMM
    _Ati Radeon 8500 64mb DDR RETAIL or GeForce 4 128 mb DDR
    _Maxtor 40 GB 7,200 rpm D740X ATA133
    _Lite On 16x DVD/48x CD ROm drive
    _Lite On 24/10/40 CD-RW
    _Sony 3.5" Floppy
    _ (2) x 24in. BLue rounded IDE ATA100 cables
    _ 18 in. Blue rounded floppy cable
    _Creative Labs Audigy sound card
    _3com 10/10 mbps Ethernt card(DSL)
    _U.s Robotics 56k V.90 modem (backup)
    _NEC Multicync FE950+ Flat creen 19" monitor
    _WIndows XP home edition
    _Keyboard + Mouse
    _Creative labs Inspire 4.1 4400 Speakers

  6. #6
    Hammerhead Shark
    Join Date
    Mar 2001
    Posts
    1,842

    Post

    Good job man. That is a great score. Now you are in the very elite club of the 9K.

    ------------------
    • Athlon XP 1700+ oced to 1650Mhz
    • MSI K7T266-RAID
    • 512mb pc2100 ddr crucial 2x256
    • 30gb 75GXP
    • HP 12x8x32 CD-RW
    • Teac Floppy
    • Cyclone 5000 from coolerguys.com 229cfm!!!
    • Alpha PAL8045 w/sunon extreme 50cfm
    • Radeon 64mb DDR
    • SB Live! Value
    --1700+@1661 (11x151)--PAL8045 w/Sunon 50cfm--512MB RAM--Ti4200 Turbo
    Check out my site for full specs.
    Coined the phrase Hammer time for the release time of AMD clawhammer and sledgehammer

  7. #7
    Mako Shark Bootleg's Avatar
    Join Date
    Sep 2001
    Location
    T. Dot!
    Posts
    3,486

    Post

    I LOATHE ALL OF YOU!!! YOU AND YOUR KICK *** 3D MARKS....*sigh*....if only i were up there too....

    ------------------
    "If brute force doesn't solve your problem, then your not using enough!"
    "If brute force doesn't solve your problem, then your not using enough!"

    P4 3ghz // Asus P5P800 // 1gb RAM // Radeon 9800pro // Seagate 160gb 7200.7 // LG DVD Burner // Lite-On CD Burner // Viewsonic PF795 19" // Altec Lansing ACS54 // Sony Studio Monitor Headphones

  8. #8
    Great White Shark Thermo's Avatar
    Join Date
    Jul 2001
    Location
    SE PA
    Posts
    5,185

    Post

    Wow! Looks like I need to find 300 marks or risk getting left behind.
    "All mankind is divided into three classes: those that are immovable, those that are movable, and those that move."
    January 21, 2013 The End of an ERROR

  9. #9
    Catfish
    Join Date
    Jan 2002
    Posts
    216

    Post

    Originally posted by Thermo:
    Wow! Looks like I need to find 300 marks or risk getting left behind.
    Haha...

    I'm getting 5600 with 23.11's, 1.33 Athlon Stock, Ti200 Stock.

    I hit 6500 with 23.11, 1.3 @ 1.36 (160mhz FSB) and Ti200 220/500 stock cooling. It would probably hit a lot higher if I added real cooling to the Ti200, I think PNY has quality RAM and GPU.
    Athlon 1.33 Ghz
    TT Volcano 6Cu+
    Epox 8K7A
    PNY GF3 Ti200 @ 220/500
    Antec SX830
    Lite-On 12x10x32
    Antec PP-303xp 300w PSU

  10. #10
    Running Man mystifmagic's Avatar
    Join Date
    Dec 2000
    Posts
    6,033

    Post

    Great job dude

    I just got back from my trip so I just saw this. Just a few more points and you'll have us in a bind None the less good work

    ------------------
    "OH Reggie, you have hidden corners...." Duets

    3DMark2001:9090
    - My Compare
    My System Specifications & Heatware
    --------------------
    Join us over at The Got Hardware? Forums

  11. #11
    Catfish
    Join Date
    Jan 2002
    Posts
    216

    Post

    Hey I have an 8K7A, right before I was planning on installing the updated AMD miniport drivers, my computer crapped out on me. How much performance would I gain by updating the AGP miniport drivers?
    Athlon 1.33 Ghz
    TT Volcano 6Cu+
    Epox 8K7A
    PNY GF3 Ti200 @ 220/500
    Antec SX830
    Lite-On 12x10x32
    Antec PP-303xp 300w PSU

  12. #12
    Folding Team Member sapasion's Avatar
    Join Date
    Sep 2000
    Location
    Folding@Home
    Posts
    15,177

    Post

    Nice job but this is more of a VC topic

    ------------------
    OC Crusaders
    My Humble Rig

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •