|
-
Tiger Shark
Is the built-in firewall for winxp good enough?
I was wondering if I should get a good firewall like zonealarm or blackice instead of using the one built in to winxp. Should I or does it work fine?
My Webpage: http://www.andyknotts.com (Give me feedback)
My specs:
----------------
AMD Athlon XP 2500+ OC'd to 2100MHz
Abit NF7 @ 205 MHz FSB
1.5Gigs PC3200 RAM @410Mhz
Turtle Beach Santa Cruz
Altec Lansing 641's
128meg NVidia 6600GT AGP
7200rpm 120G w/ WinXP pro
5400rpm 40G w/ Gentoo Linux
NEC DVD/RW
Lite-on 40x12x48 CDRW
19" Hyundai L90D+ LCD (amazing  )
-
GO BENGALS!!!!!
The Windows XP firewall is pretty good. Whenever I do a security port scan, I have always been safe when using the Windows XP firewall. I have also used Norton Internet Security 2020 which is good.
Last edited by gateways_rule; 08-18-2002 at 12:48 AM.
-
Tiger Shark
OK, thanks. Yeah, I ran a port scan with the xp firewall and they all were invisible and when I ran it with black ice one was shown as closed and the upnp port was shown as completely open.
My Webpage: http://www.andyknotts.com (Give me feedback)
My specs:
----------------
AMD Athlon XP 2500+ OC'd to 2100MHz
Abit NF7 @ 205 MHz FSB
1.5Gigs PC3200 RAM @410Mhz
Turtle Beach Santa Cruz
Altec Lansing 641's
128meg NVidia 6600GT AGP
7200rpm 120G w/ WinXP pro
5400rpm 40G w/ Gentoo Linux
NEC DVD/RW
Lite-on 40x12x48 CDRW
19" Hyundai L90D+ LCD (amazing  )
-
Reef Shark
Just remember XP's firewall does not offer any protection for outgoing connections. Make sure BIDs security settings are set to the highest. And if you arent using upnp, I would just disable it.
-
Mako Shark
Black Ice blows chunks.. the built-in firewall in Windows is made by a company which has never made a firewall before.. ZoneAlarm doesn't block, it 'stealths' - so the bad guys don't even know you're there, plus - it's free.. You decide.
[edit] Sorry, should have said "Black Ice blocks, it doesn't 'stealth'.." The above statement about Black Ice is just IMHO. [/edit]
Last edited by BlueOval; 08-18-2002 at 07:02 PM.
1st Rig: DFI LP Ultra B | 2500+ Barton | 2x256 Corsair XMS PC3200 | 6800GT! | SP-97/120 Panaflo M1A | Antec 1000AMG/Fortron 530 | XPHome SP1
2nd Rig: ABIT AN-7 | 2400+ mobile | 2x512 Geil Golden Dragon PC3500 | Ti4400 | SLK-900/92 Panaflo M1A | CM ATC-111/Antec 350 | 2kPro SP4
3rd Rig: EPOX 8RDA+ | 2100+ Rev B | 2x256 HyperX PC3000 | Ti4400 | SLK-800/80 Panaflo H1A | Blizzard 360/Enermax 350 | 2kPro SP4
My Heatware
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|