This is with regard to the Asus A7V266-E

Here is some help for all of you A7V266-E Owners. Most of this has been posted before, but not all in one place. Hope it helps you out...

**** {URGENT IMPORTANT INFO}****
Make sure that the CMOS CLR_RTC jumper is NOT connected when you power up. The manual is incorrect, and if you leave it connected you will DAMAGE the CMOS and perhaps Fry your CPU.

i dont understand what this means, if the manual is wrong, who shud i believe then?. abt to get this board this saturday , so before booting the system up, im gonna put the jumper in its correct position, so i want u guys to tell me where it shud be.



------------------
Primary Pc:
AMD Athlon 1400@1400 mhz 266FSB (tbird)[AYHJA(W) ]
Enermax Whisper 350W EG365P-VE(FC)
Toshiba SD-R1002 DVD/CDRW
Vantec 6035D w/evercool 32CFM fan with standard thermal paste
Asus A7V133-RAID(Revision 1.05) with Thermal take Blue ORB
Crucial CAS2 pc133 512megs SDRAM
Hercules 3D Prophet II 64MB (GForce 2 GTS)220 MHz core CPU speed and 360 MHz memory speed by default
MAXTOR DIAMONDMAX PLUS D740X 60GB 7200RPMATA133
48X Sony Cdrom
Sblive! Value
LG 17" Flat E700B
Secondary Pc:
Amd Athlon TBird 1.2 ghz 266FSB
ECS K7S5A
512MB PC2100 DDR Cas2.5
MSI GF2MX400 5ns VIVO