Who's running their PC 133 RAM at 150 mhz?

[Kaizen]

Hi, I'm waiting on a SOYO VIA Pro Mobo and eager to test out the 150 FSB to see what it will do for my PIII 700 (currently on Abit BH6 running at 127 FSB at stock 1.7V)

Question: The Soyo gives me the option to run the memory at either true FSB speed or plus or minus 33 mhz of the FSB.

Is it pretty safe to try and run my memory (PC 133 Micron Cas 2) at 150 Mhz? Or should I just run it at the 117 mhz setting (150=33)?

Who else is running CAS 2 PC133 at 150? And are you able to maintain it's CAS 2 rating?

I know I should just wait and see for myself but I'm eager to know and thought I'd ask.

[tu2thepoo]

i got my AZZO.com PC133cas2 RAM (they use micron RAM) up to 158mhz Cas2 with no problems.

[This message has been edited by tu2thepoo (edited March 29, 2001).]

[ynd69]

I am running my 128MB Corsair PC133 CAS2 @ 150MHz CAS2! I am gonna take it higher once I get my KT7A.

------------------
ynd - Young and Dangerous, forever.

My Specs at Mr.White's Computer Haven

[James_Emerson]

I heard Mushkin REV3 is the best OC memory so far easily @ 150

I saw some test on it.
I wouldn't think it's safe cuz it' s right at the edge of crashin'.

HEY don't try dont know right?
GO for it u big OC

------------------
1200mhz @ 1272mhz
Asus A7M266 DDR
Thermaltake Volcano II
39'C Temp.
----------------
I had committed 28 robberies in which
I never fired a shot
or harmed anyone.
I never drank, smoked, or swore.
I never took valuables from women.
I never loaded my shotgun and i always worked alone.
I am a gentleman.
www.Outlaws.cc
----------------------
My system specs. at DoGGx site! HeHaww!!

[Kaizen]

That's great to hear!!

Man, y'all are fast... I guess I'm not the only insomniac around...

Thanks again!! I get the board in 2 days!!!
I'm gonna bust my 1 ghz cherry... sniffle...

[BRB]

Originally posted by Kaizen:
Is it pretty safe to try and run my memory (PC 133 Micron Cas 2) at 150 Mhz? Or should I just run it at the 117 mhz setting (150=33)?

The only bad thing I've ever suffered from pushing the memory too hard was a registry corruption that was too far gone to repair. Hey, I had to reformat and reinstall, no big deal for me. I've never, nor have I ever heard of anyone physically damaging RAM by overclocking. As far as which is better, go for the 150MHz.

Who else is running CAS 2 PC133 at 150? And are you able to maintain it's CAS 2 rating?

I'm only running mine at 125MHz now because that's what I need to maintain 167MHz FSB but I have and can run completely stable with FSB and memory at 155MHz with memory at 2-2-2.




------------------
ABIT SA6R
PIII800EB@1002 (6x167MHz)
384MB Mushkin High Performance Rev 2 PC133 (125MHz / 2-2-2)
2 x IBM 75GXP 30GB In RAID 0
Elsa Gladiac geFORCE 2 GTS 32MB-DDR
SoundBlaster Live! Value
Plextor 12/10/32A Burner
56x CD-ROM
100MB Iomega ZIP
56K Actiontec Call Waiting
3COM 10/100 FastEthernet
WindowsME

[mrwhite]

I've seen a guy who had one stick of generic 100mhz cas3, one stick of generic 133mhz cas3 and one stick of 64mb generic 100mhz ca3 fry 2 of his ram sticks (both the 128mb's) and his mobo (MSI Pro2a) when he tried the FSB from 100 straight to 122 and from cas3 strahgt to cas2. his northbridge fried and some of the gold plates on the pins of the ram had actually come off.

Now he has 2 sticks of 128mb 133mhz cas3. Happily doing 100mhz at cas 2.

------------------
Knight of the OC Crusaders - SBC Member

We'll see what the future holds when we see her holding it.

My specs on My site.

[sapasion]

My mosel sticks are called pc133 even though with 7ns memory the maybe should be called pc143. Anyway, I too am at 150+ 155 to be exact. BTW, that's 2-2-2 of course.

------------------
Prince of the OC Crusaders
P3 700@1090 Screenshots
Mr.White's Sharky's Showcase

[The WhiteRabbit]

My Crucial (a division of Micron) PC133 CAS2 RAM will almost do 150 MHz CAS2 -- it'll do it but it turns out to be unstable. I haven't tested exactly how fast it will do and maintain stability, but I'm guessing 150 MHz won't be a problem at CAS3.

I do plan to do more stability testing at CAS3 to see just how fast the RAM can go, and if it's the RAM or FSB that's holding me back from higher FSB/RAM speeds. If it's the RAM, I might shell out for some RAM with 6ns chips and see how far I can push my FSB

------------------
OC Knight of the OC Crusaders

ABit KT7A
AMD Duron 600@1065 (142x7.5)
FOP38-1 w/ Arctic Silver
256 MB of Crucial CAS2 PC133@142 MHz CAS2
30 GB IBM Deskstar 75GXP
14.4 GB IBM Deskstar 14GXP
Ricoh 8x4x32x CD-RW 7080A
Pioneer 16x Slot DVD-105
GeForce2 GTS (231/394)
Diamond MX300 (Vortex2)
8050 3DMarks (2k)
3530 3DMarks (2001)

[sdman]

Yup! Sapasion is right the Mosel Vitalec memory is good stuff. Got 256 Megs running at 150MHz FSB on my Abit KT7A.

[SamMaster]

I got my fsb (and mem for that matter) to 150 mHz too. It's micron CAS2 PC133 7.5ns and I ran it with full speed optimisations (turbo, etc...). Only my now crappy vid card couldn't take it. It arctifacted in 3D Mark 2000.

------------------
My system specs at the ever-so popular Mr.White's WebSite

My site

My company site

[WCHL9]

Originally posted by The WhiteRabbit:
My Crucial (a division of Micron) PC133 CAS2 RAM will almost do 150 MHz CAS2 -- it'll do it but it turns out to be unstable. I haven't tested exactly how fast it will do and maintain stability, but I'm guessing 150 MHz won't be a problem at CAS3.


I do plan to do more stability testing at CAS3 to see just how fast the RAM can go, and if it's the RAM or FSB that's holding me back from higher FSB/RAM speeds. If it's the RAM, I might shell out for some RAM with 6ns chips and see how far I can push my FSB

So cruical ram will make it to almost 150 most of the time, how much faster is the Mushkin stuff, and could you overclock your any faster as a result or is it just for the sake of stablity. Damn I need to get into the OC stuff, Im bored

------------------
"ME AND YOU WOMAN BOOYA!"


AMD 1.1GHZ
Alpha PAL6035V2
ABIT KT7-raid
512 Crucial RAM
IBM75gxp 2X45
Voodoo 5500 AGP
NEC 22" FE1250
Sound Blaster Platium 5.1
Midiland S4 7100
Plextor12x/Pioneer16x DVD
Antec SX 1030 case
Nice HP 1220cse printer

[RPG Junkie]

Well mine cant go QUITE that fast but they are both PC-100 CAS2, and they have ran at 140 CAS2 and are VERY stable, one is a Siemen 64 stick and the other is a Kingston 64 stick.....well I thought maybe I could join in on this forums but it seems my slow RAM cant cut it

------------------
PIII [email protected] is my highest POST into Windows
Gigabyte GA-6VXE+
PC-100@133 128 RAM
Hercules 3d Prophet 2 MX @ 205/205 /w 10.80 Detonators
Soundblaster 16
3dmark 2001 score: 2322 <-------- on lowest settings /w T&L
3dMark 2000 score: 5033 <-------- on lowest settings /w T&L

A girl once said "Dont look at me in that tone of voice" and that confused me ever since

[WCHL9]

Originally posted by The WhiteRabbit:
My Crucial (a division of Micron) PC133 CAS2 RAM will almost do 150 MHz CAS2 -- it'll do it but it turns out to be unstable. I haven't tested exactly how fast it will do and maintain stability, but I'm guessing 150 MHz won't be a problem at CAS3.


I do plan to do more stability testing at CAS3 to see just how fast the RAM can go, and if it's the RAM or FSB that's holding me back from higher FSB/RAM speeds. If it's the RAM, I might shell out for some RAM with 6ns chips and see how far I can push my FSB

So cruical ram will make it to almost 150 most of the time, how much faster is the Mushkin stuff, and could you overclock your any faster as a result or is it just for the sake of stablity. Damn I need to get into the OC stuff, Im bored

------------------
"ME AND YOU WOMAN BOOYA!"


AMD 1.1GHZ
Alpha PAL6035V2
ABIT KT7-raid
512 Crucial RAM
IBM75gxp 2X45
Voodoo 5500 AGP
NEC 22" FE1250
Sound Blaster Platium 5.1
Midiland S4 7100
Plextor12x/Pioneer16x DVD
Antec SX 1030 case
Nice HP 1220cse printer

[sapasion]

Originally posted by WCHL9:

So cruical ram will make it to almost 150 most of the time, how much faster is the Mushkin stuff, and could you overclock your any faster as a result or is it just for the sake of stablity. Damn I need to get into the OC stuff, Im bored

First of all Muskin rev2 is Mosel Vitelic based. Its essentially the same as the sticks carried by KDComputers and Memman.
Rev3 is Infineon based and guaranteed at 150 cas222. However, even though you get a guaranted 150, I know almost no one over 160 and most don't get past 155. Rev3 uses 7.5ns. I am told soon there will be a 7ns version but its not out yet. Whereas the rev2 [Mosel] uses 7ns. This should essentially guarantee 143 and I have yet to find anyone who cannot run Mosel at at least 143. As aforementioned my Mosel pumps out 155 and is cheaper than Mushkin rev3.

------------------
Prince of the OC Crusaders
P3 700@1090 Screenshots
Mr.White's Sharky's Showcase