is 62c too hot?

Printable View

Show 25 post(s) from this thread on one page

10-23-2003, 06:22 AM
simple

is 62c too hot?

Im running my new 2500 barton on a stock hsf@200x11 running 3200+ and everythings pretty much stable accept halo, it crashes constantly.

I read that my a7n8x board being a rev 1.04 and not a rev 2.0 has stability problems running barton 333's and that it may help moving the jumper on the board from 266/333 to 200, anyone do this and had success?

Im only running mushkin 2700 cas2.5's and wondering if my memory will handle this?

my mem timings are 2.5,3,3,11 and just running under the bios its at 62-63c/145f isnt that kinda hot?

If i buy a better hsf(noisy bastards)will it really bring my temps down that much? the fans already running at 4100rpm

Is there a program out there where i can look at my cpu temps while in windows under load? im a newb i know, thx in advance.
10-23-2003, 06:24 AM
arrow

to my knoelege thats running pretty close to the danger zone
10-23-2003, 07:02 AM
Reign

man if that is the idle temp you have to back down. or put a slk800 or 900 with a good fan up there.

if 62 is your idle temp than under full load let's say 70. that' gives you 10 degrees headroom before you smell something funny :P

download 'speedfan' for temps in windows
10-23-2003, 07:14 AM
kpxgq

thats pretty hot... too hot to touch with your finger for more than a couple secs
10-23-2003, 08:17 AM
gurutoo

Yes.
10-23-2003, 09:48 AM
russ_watters

That's hot enough I'd drop the multiplier a notch until you can improve your cooling.
10-23-2003, 09:51 AM
speedyaxon

You'll definitely wanna get a decent hsf pronto, and maybe even drop the speed/voltage of the chip for now so you don't damage it anymore than it might have been already.:eek:
10-23-2003, 10:37 AM
Lord Vetinari

MBM5 will monitor your temps in Windows. You should also get memtest86 and check your memory running at that speed.... and as all the other have said you are running way too hot.
10-24-2003, 05:14 PM
simple

Thx guys.

I took my pc down to a local place here in town that usually has guys that know what there doing, we reseated my hsf and he put some thermal grease that looked a helluva lot more robust than the stuff i used, he also put it on in a better manner than i did and bang my cpu started up at 36c.

I got it home and oced to 3200+ it runs at 48-50.

A question about speed fan and mbm5 i downed them all and it seems my board doesnt have a sensor for the cpu? a7n8x deluxe.

im getting read outs for system bus and whatnot but not the cpu and that mbm5 just confuses my small mind..

running speed fan im getting a 51c for temp 1 which is hot, is this my boards chipset? i touched the hs on what i believe is the chipset and that sucker is hot to the touch..it all seems stable but id like to cool things down, also my hdd is pretty hot also..

would a couple of case fans help?
10-24-2003, 07:09 PM
richardginn

Anything over 50C to me is no good at all.
10-24-2003, 09:10 PM
pahncrd

hey,

what about 60degrees under load at max... is that acceptable?
10-24-2003, 09:13 PM
speedyaxon

no, that's still a little high. I wouldn't feel safe with those temps.:(
10-24-2003, 10:06 PM
ATilaptops

Heck man I have over 50c at idle sometimes at stock! How can you check temps at full load anyway?
10-24-2003, 10:14 PM
speedyaxon

run superpi or prime95...something that runs in a smaller window where you can have the temp monitor open too.
10-25-2003, 04:34 AM
syk0

Quote:

Originally posted by ATilaptops
Heck man I have over 50c at idle sometimes at stock! How can you check temps at full load anyway?

Using CPU temperature monitoring software in Windows. For example: MB probe. Download here http://www.majorgeeks.com/download283.html

Other programs like CPU Burn-in will stress your CPU so it's under full load.

http://www.majorgeeks.com/download3921.html

Show 25 post(s) from this thread on one page