-
Is my case any good?
I have an Alienware case with the hydrolic sliding plate on the front. I bought the KoolMaxx Video cooling. If you go to their gaming machine site http://www.alienware.com/x/sector/sy...aming_main.asp mine looks exactly like that black one, but is it ok for air flow? Also, I have some dust in my machine and I want to clear it out but since there is so much dust, those little spray things from stores don't work. My dad was gonna just bring his air compressor and blow it all out, is that ok?
------------------
I am a proud owner of an Alienware gaming machine!
[This message has been edited by FuzzyNips (edited April 08, 2001).]
-
No, don't use an air compressor, the air comming out contains moisture, oil and other crud. I spray the cards (remove if nessesary) and motherboard with canned air and then vacuum out the dust from the bottom of the case after.
------------------
PIII 800EB
ASUS CUSL2-C
Voodoo5 5500 AGP
Complete specs
-
so i dont really get what do you think is wrong with your case?
------------------
Remember, there are no stupid questions, but there are a lot of inquisitive idiots.
-
O.K., so I should just remove the cards and spray them off individually? If so, when I put them back in should I do them all at once or one at a time and then boot up after I put each one back in? Will windows have to do anything like "detect new hardware" or not since they were already in the slots and set-up? Sorry, I'm kind of a noobie. https://www.sharkyforums.com/images/.../2005/06/5.gif Also, I was just basically wondering if my case had good enough air flow to keep it cool. (no overclocking of any kind going on.)
------------------
I am a proud owner of an Alienware gaming machine!
-
Pretty much ANY case should be fine without overclocking...
And just spray everthing in the case with canned air, no need to take everthing out. Vaccumm later. Don't touch motherboard or any cards or anything woudl probably be good advice too.
------------------
Keith Palmer
Squigly Worm Graphics
[email protected]
Abit BP6 SMP
Intel Celeron 533mhz
Intel Celeron 533mhz
Micron 256MB PC-133
ATI Radeon VE 32mb DDR
Canopus Pure3D LX Voodoo2 12mb SLI
Canopus Pure3D LX Voodoo2 12mb SLI
20GB Maxtor UDMA-66 HD
Creative Labs AWE32 Gold ISA
3Com 905b 10/100mb/s NIC
17" NEC Multisync 70
17" NEC Multisync 70
-
O.K., I was spraying the inside of my case earlier with some ReAir that I bought at COMPusa which also comes with a pump to fill it back up. It's just plain air with no oils in it or anything, so I thought it'd be a good investment. Problem is, I have to pump it up just about 50 times just to get enough air to spray one card off. Then, when I do spray it, I see little bits of dust coming off, but there is still a bit more on there. I took my finger and rubbed it gently against a card and got the rest off. I think when I install my new graphics card later this week, I'll just go hardcore and get my "pump action" on and blast it all away.
------------------
I am a proud owner of an Alienware gaming machine!
-
hehe yeah just get an air compressor for that baby and blow all that dust out
------------------
Remember, there are no stupid questions, but there are a lot of inquisitive idiots.
