Is it worth overclocking?

Hey everyone i know o/c is for enthusiasts and such but i am one also and i WANT TO but then again if i fry a 1.2ghz chip than my dad will friggin kill me. So should i do it anyway? I'm getting a wbk38 hsf and 2 80mm case fans, 1 fan blowing at pci slots, the one thats coming the with vid card, and MAYBE 1 more fan....you think i should give it a try......is there that big of a risk if i do it gradually to the point of lockup?

ALSO where do you mess around with voltages...on the motherboard>? and if you up the voltage isnt that more dangerous...............?>?????

PLEASE answer and i will send you...well nothing but you will have the enjoyment of knowing you helped someone out https://www.sharkyforums.com/images/.../2005/08/2.gif

------------------
Yes, the name is from dumb&dumber, my friends gave it to me after I moved down to Texas.

I say you do not need to overclock a 1.2 ghz cpu. Just treat is to a silverado hsf and be happy about all the fps power you have.

------------------
www.geocities.com/richardginn/templatehtml -Come visit the Template HTML homepage

well, i guess if you've got the fastest chip in the market (say the 1.33 t-bird) and want to go faster (say for gaming), then it would make sense to over clock, though only after increasing your ram and all that, i guess (since you're being extra cautious).
the silverado is great.

------------------
Mirrors should reflect a while before throwing back an image.

I warn you Seabass, overclocking is addictive. It`s always a challenge to see how much that little extra you can get from your computer. I have been through this phase and may I say that it was fun , but I also screwed up a few times, resulting in either a BIOS problem,and one instance, a kaput CPU. My advice is if your Dad is going to friggin kill you if you screw up the system then leave it alone. I personally think that a 1.2 GHz chip cant be overclocked too much, maybe to 1.5 MGz with excellent cooling.

You really cannot fry a chip unless you go all out, or get addicted. I say, set a goal of 1.33 Ghz and try to get to that. Once you get that, and I'm sure you will, STOP! all you have to do is set the FSB in your bios setup a little higher. Go ONE STEP AT A TIME. If there are stability problems at any point, simply increase the Vcore by the least amount possible, usually .05V. also, when you are in bios, there is a hardware monitor, check and see your temperatures. If they are getting close to 50C I would stop right there. With proper cooling and an overall great system, Mr.White (If you visit OC forum at all you know him) runs his T-bird at a whopping 1.62Ghz. He is still the champion of the OC'ers. Anyways, anyone with a decent PSU, mobo and an AXIA t-bird with a good cooler will get to 1.4Ghz at the very least.

------------------
asus p3b-f
p3 700@868, soon to be 900 (I can't do it, Captain. She wont hold!)
creative geforce 256 120@130 core 166@175 memory
soundblaster live platinum
256 mb pc-133 ram cas2 but otherwise crap
28.5GB barracuda ATA
creative CDRW 4x4x32
POS box, but it works
SE Overclockers SETI@Home Team

I'd say leave it alone for now. Maybe when it's starting to get a little slow try to overclock it.

------------------
TBird AXIA 1 Ghz@1133
GlobalWin CAK38
MSI K7T-Turbo
Leadtek Geforce 2 Pro
256 MB Crucial RAM
64 MB Centon RAM
Pacific Digital CDR/RW
SB Live Value
Win 98 SE
Logitech MouseMan+

http://members.aol.com/o0shak0o/mysupra.jpg

Most motherboards allow a Vcore setting in the BIOS, usually under a section, "CPU Settings."

What are your tempretures at the moment? If they're high intially (50-60c) then I don't recommend overclocking. However, if they're in the region of 35-50 or so, then go ahead. Another thing, if you want safe overclocking, you could just overclock without changing any voltage settings. This won't produce such good results though.

Don't worry to much if your PC doesn't turn on after a strenous O/C. Just clear your BIOS and try lower settings. Don't expect your PC to be visibly faster. The only speed increase that you'll be getting is in synthetic benchmarks, like Sisoft Sandra and 3D Mark 200x.

What motherboard do you have?

------------------
Knight of the OC Crusaders.

flammen is right, just overclock it when you feel its getting slow. and overclock to a nice stable speed.

------------------
PIII 800 mhz
Intel D815EEA motherboard
Kingston 128 MB PC133 RAM
Seagate 30GB ATA/66 7200 RPM H.D.
Voodoo 3 2000 16 MB PCI
Acer 52X CD-ROM
ViewSonic 15GA monitor
Creative Modem Blaster 56K modem
Creative Cambridge Soundworks speakers w/subwoofer

well i would say overlock when u need it and when it will really make a difference.

i'm not gonna try overlclocking till i do my next upgrade this summer, when ill have a new video card. cause until then, i'm not gonna notice a huge difference with this voodoo 3. maybe then ill get a badder hsf and oc it. right now, i'm going to enjoy the peace and quiet of a stock hsf.

------------------
Antec SX830 Workstation Midtower
Intel Pentium III 1GHz
Abit VH6-II (Via Apollo Pro 133A)
384 MB Generic PC133 CAS3
Voodoo 3 2000 AGP (i know...) OC'd to 175 MHz
Quantum 27 Gig 5400 RPM UDMA 66
SBLive! Value
52x CDROM, 2x2x6 Memorex CD-RW (ghetto)
Viewsonic E790 19"
Windows Me / Progeny Debian

Don't overclock because 1.2GHZ is plenty of power for even the most demanding games. It is not worth the risk.

Quote:

---

Originally posted by indieboy117:
Don't overclock because 1.2GHZ is plenty of power for even the most demanding games. It is not worth the risk.

---

If he has a good hsf than there is no risk.

All you gotta do is first unlock ur cpu. All you do is write with a pencil a thin line on all 4 of the L1 bridges.

Very simply process, many sites show u how it's done, some over do it and make a 3 page thing out of it when really it's not much...

Second go into the bios and set ur fsb a little higher. I'd say go up to 110 first than go by 1's. Then lower ur mutipleyer (spelling?, oh well..) some (ex. 7x100=700 go 5x100=500). This lowers the cpu speed.

Once that is done go back into the bios and up the fbs even higher. If you have a class c athlon than you'd start at 133 and work urself up from there.

If your mobo lets u do ur ram seprately I'd try that first and c how far it can go up. Then try 2 get the fsb 2 that point.


------------------
*******************
Games and Stuff
My Specs
*****AMD Soldier*****

*** i gotta do the pencil trick?!?!? i thought my mobe, asus a7m266 has software overclocking.....AND i wanna overclock it to 1.3ghz so i can take at leas a LITTLE advantage of this $25 heatsink/fan i just bought. globalwin wbk38

------------------
Yes, the name is from dumb&dumber, my friends gave it to me after I moved down to Texas.