-
Problem with liteon 16x
ok...my friend has a 16x10x40x lite-on cdrw drive from newegg.com (got it a while ago)
he's running windows me
if we turn DMA on in the device manager, the burner freezes half way through the burn, even on test burns (we tried many different brands and speeds of media too)
if we keep DMA off for the cdrw, it burns fine, but slowly...16x should be around 5 minutes, right? usually it takes almost 10 minutes for 650-700 megs
i think it is pausing every once in a while (and the burn proof is saving it), but i'm not sure...what do you guys think we should do?
fyi, dma is on for the hard drive (20 gb 60gxp)
thanks
------------------
Athlon 1200/266 @1301/274
Asus A7V133
512 MB Crucial PC133
Leadtek Geforce 2 Pro 32 MB
SB Live 5.1
Toshiba 16x DVD
Philips 8/4/32 CDRW
40 GB IBM 60gxp
-
its not sharing ide controller? it sould be using 80 pin connector
------------------
w00f - w00f
-
Are all other programs still running? It also might be a cd burner software problem. Might want to get a new one.
------------------
My Pathetic System.
Old Dell Dimension XPS M200s Case
Intel Pentium 3 667MHz
ABIT VL6 Motherboard
128MB PC100 SDRAM
ATI XPERT 99
Acer 10x8x32 CD-RW
Dead 12x CD-ROM
3.5 inch Mitsumi Floppy
250 watt PSU
2.93GB 4500 RPM HDD
Linksys Everywhere Fast Ethernet Card
Stupid Motorola Surfboard Cable Modem SB4100
Hewlett Packard Deskjet 832C Printer. (Yes the purple one...)
Generic Harman/Kardon Speakers.
[This message has not been edited by Housen Maratouk. WAIT A SECOND! OF COURSE IT WAS! HOW ELSE COULD THIS SYSTEM BE SO BAD? Oh wait, it's old. :( ]
-
best thing i can suggest(to see if it's the burner itself) is put it on its own ide channel, detatch your other cd-rom, just make it the hard drive on ide channel 1 primary, and the cd-r on channel 2 primary. make sure to check the jumpers on the back of the drives, then reformat, and install a fresh winME or partition a drive, and hide your current partition, then install ME(you can go back and delete it when testing is done)
also, what software are you using?
i dont really think it's the cd-r that's the problem though. it could be some irq conflict or some program like a virus scanner running in the background. but if you do what i mentioned, i'm sure you'll know if it's a windows problem(ie software) or if it's your burner(hardware problem)
btw, you dont need an 80 pin connector https://www.sharkyforums.com/images/.../2005/06/4.gif 40 pin standard ide connector works just fine for all non-scsi cd drives.
i dont get why the pioneer 106-s/116 has ata/66. it's useless.
------------------
<A HREF="http://www.harapan.co.jp/english/JPImage_e/tanuki.htm" TARGET=_blank> "You can see Tanuki utilizes his balls as parachute for desperate suicide attack and a big treasure ship to send out those Tanuki who can't disguise as human-being..."
-http://www.harapan.co.jp/english/JPImage_e/tanuki.htm</A>
-
the burner is on its own channel (master on the second channel)
we are using roxio easy cd creator 5 platinum...we'll give nero a try
would the problem be related to DMA? if dma is on the whole computer just locks up in the middle of burning...if its off the burn is slow but it works eventually
------------------
Athlon 1200/266 @1301/274
Asus A7V133
512 MB Crucial PC133
Leadtek Geforce 2 Pro 32 MB
SB Live 5.1
Toshiba 16x DVD
Philips 8/4/32 CDRW
40 GB IBM 60gxp
-
Yeah at 16x it should take 5 min...fyi.
------------------
AMD Thunderbird 900
256MB SDRAM
SBLive! Platinum 5.1
Hercules 3D Prophet II 64MB
Kenwood 72x CD ROM (SOLD)
Maxtor 5.4GB HD
IBM 30GB HD
Lite-On 16x10x40 Burner
3D Mark 2000 score: 7680
-
unless you're copying on the fly from another cd device -___-
------------------
<A HREF="http://www.harapan.co.jp/english/JPImage_e/tanuki.htm" TARGET=_blank> "You can see Tanuki utilizes his balls as parachute for desperate suicide attack and a big treasure ship to send out those Tanuki who can't disguise as human-being..."
-http://www.harapan.co.jp/english/JPImage_e/tanuki.htm</A>
-
5:45 for 80 minute cd's...not sure about 74 minute cd's, don't use those anymore...
------------------
Enlight 7237
Epox 8K7A
Athlon TB 1.2ghz
OCZ Gladiator w/ Delta
Crucial 512mb PC2100 ram
Western Digital 40 gig 7200 rpm
64mb Leadtek Geforce 2 Pro
Toshiba 16x DVD-rom
Lite-On 16x/10x/40x
Sound Blaster Live
Samsung 19" Syncmaster 955df
