T-Bird 800 is only at 950 :(

Well so far I have only managed to get this guy up to 950. I am pretty sure it is not a temp prob. I bumped up the voltage to 1.85 and tried to get 1gig. Booted up to windows fine. Temp was okay. But Quake 3 would lock up as well as 3d Mark 2000. Right now I am at 950 at default voltage (1.75, I think is default anyways). And runs SMOOTH. I have only used the multiplier, haven't used any FSB OCing as my RAM sux and waiting to get a sweet schtick of Corsair PC133 CAS2 stuff.
Anyone have any suggestions or am I SOL?

Oh yeah, is there anyway to go higer than 1.85 other than modding the mobo?

------------------
Sir Nutdotnet
Sapasion's ONLY OCing "Hippie-Knight"

T-Bird 800
Asus A7V
192 PC-100 Megs of Ram
27.3 Gig IBM HD 7200
52x CD-Rom
8x4x32 HP CD-RW
Elsa Gladiac GF2 GTS
SB Live!
Sparkle 300 Watt PS
Enlight 7237 Case

[This message has been edited by Nutdotnet (edited December 12, 2000).]

No one has any suggestions?

------------------
Sir Nutdotnet
Sapasion's ONLY OCing "Hippie-Knight"

T-Bird 800
Asus A7V
192 PC-100 Megs of Ram
27.3 Gig IBM HD 7200
52x CD-Rom
8x4x32 HP CD-RW
Elsa Gladiac GF2 GTS
SB Live!
Sparkle 300 Watt PS
Enlight 7237 Case

Quote:

---

Originally posted by Nutdotnet:
No one has any suggestions?

---

all i have to say is, be grateful with what u got... i have a 900 and can't even go to 950... it just give's me sys reg problems... oh well.....

Now does that help?? No!

Sounds like to me that you are not doing something right with your setup.

------------------
Sir Nutdotnet
Sapasion's ONLY OCing "Hippie-Knight"

T-Bird 800
Asus A7V
192 PC-100 Megs of Ram
27.3 Gig IBM HD 7200
52x CD-Rom
8x4x32 HP CD-RW
Elsa Gladiac GF2 GTS
SB Live!
Sparkle 300 Watt PS
Enlight 7237 Case

i have the same setup as you asus a7v and t-bird 800 i was only able to get it up to 950 also. It seems thats what most people i have talked to are getting too.

Yeah it sounds like it just needs a little more voltage. But I am not about to go solder my board to do it.

------------------
Sir Nutdotnet
Sapasion's ONLY OCing "Hippie-Knight"

T-Bird 800
Asus A7V
192 PC-100 Megs of Ram
27.3 Gig IBM HD 7200
52x CD-Rom
8x4x32 HP CD-RW
Elsa Gladiac GF2 GTS
SB Live!
Sparkle 300 Watt PS
Enlight 7237 Case

I have my 800 running at 1050 with no problems with 3Dmark 2000. I did notice that when I have the voltage set at 1.85 when I check the voltage in windows with Asus monitor, it is reading 1.9-1.92. So, it could be my board pumps a bit more juice than some. I know of no other way than to modify the board to up the voltage.


------------------
Tbird 800@1050
Asus A7V
Globalwin FOP32
256meg PC133
Geforce2 MX
SB Live Value
20gig ATA100 HD

Either that or you just got lucky and got a sweet cpu https://www.sharkyforums.com/images/.../2005/06/5.gif

------------------
Sir Nutdotnet
Sapasion's ONLY OCing "Hippie-Knight"

T-Bird 800
Asus A7V
192 PC-100 Megs of Ram
27.3 Gig IBM HD 7200
52x CD-Rom
8x4x32 HP CD-RW
Elsa Gladiac GF2 GTS
SB Live!
Sparkle 300 Watt PS
Enlight 7237 Case