Printable View
I have a TB 900 running on a KT7A-RAID w/a FOP32-1, Arctic Silver, and Crucial CL2 PC133 RAM. I there a systematic way in which you seasoned OCers go about OCing processors. I am ready to test the limits of my system. Yeeha.
------------------
Athlon 900 TB
on a KT7A-RAID
128MB PC133 CL2
ATI Radeon 32MB DDR
KDS VS-190 19"
MS IntelliMouse Explorer
I usually try for 200mhz over stock and work form there, If it's stable then go higher, if it's not then back it off a little.
------------------
The "Rogue" Knight
OC Crusader's
------------------
Reality is just an illusion due to lack of drugs..
200mhz, sounds pretty gutsy to me. Maybe I'll start at 150.Quote:
Originally posted by Rogue:
I usually try for 200mhz over stock and work form there, If it's stable then go higher, if it's not then back it off a little.
------------------
Athlon 900 TB
on a KT7A-RAID
128MB PC133 CL2
ATI Radeon 32MB DDR
KDS VS-190 19"
MS IntelliMouse Explorer
Hey man it's your computer, do what you feel confident doing https://www.sharkyforums.com/images/.../2005/06/6.gifQuote:
Originally posted by Azk:
200mhz, sounds pretty gutsy to me. Maybe I'll start at 150.
------------------
The "Rogue" Knight
OC Crusader's
------------------
Reality is just an illusion due to lack of drugs..
If it was a Intel chip I would take it slooow... and easy, and check stability before going to high. But than again I don't do AMD!!!
------------------
cel.600@928
OC Knight
Running at 1080MHz (144FSB/35PCI x 7.5 and v1.850) right now...still need to test the stability. Posted at 1133MHz but crashed during Win boot. Also I corrupted my registry several times along the way, what does that?
------------------
Athlon 900 TB
on a KT7A-RAID
128MB PC133 CL2
ATI Radeon 32MB DDR
KDS VS-190 19"
MS IntelliMouse Explorer
Also, how high do you guys go with the core voltage? What is the I/O voltage?
------------------
Athlon 900 TB
on a KT7A-RAID
128MB PC133 CL2
ATI Radeon 32MB DDR
KDS VS-190 19"
MS IntelliMouse Explorer
Try 8x144, I run at 1.85v
Nice going so far https://www.sharkyforums.com/images/.../2005/06/5.gif
------------------
The "Rogue" Knight
OC Crusader's
------------------
Reality is just an illusion due to lack of drugs..
Running that speed caused me to fail to post. 1080mhz seems stable except with 3D apps, spec. 3DMark2K. I crashed when running the benchmark test for the 2nd time. My CPU temp immediatly afterwards was 51C; at what temp should I get worried? I think that I will pull back the MHz a bit until I run stable in 3DMark.Quote:
Originally posted by Rogue:
Try 8x144, I run at 1.85v
Nice going so far https://www.sharkyforums.com/images/.../2005/06/5.gif
------------------
Athlon 900 TB
on a KT7A-RAID
128MB PC133 CL2
ATI Radeon 32MB DDR
KDS VS-190 19"
MS IntelliMouse Explorer
That instabily could be cause by the high FSB. Try 8.5x133 at 1.85v and the I/O at 3.45vQuote:
Originally posted by Azk:
Running that speed caused me to fail to post. 1080mhz seems stable except with 3D apps, spec. 3DMark2K. I crashed when running the benchmark test for the 2nd time. My CPU temp immediatly afterwards was 51C; at what temp should I get worried? I think that I will pull back the MHz a bit until I run stable in 3DMark.
------------------
The "Rogue" Knight
OC Crusader's
------------------
Reality is just an illusion due to lack of drugs..