change mem speeds w/ A7V?

I'm just wondering if I'm missing something here..In the A7V bios 1005A, to change the mem settings, you have these options.

user define
7ns (143 2-2-2)
8ns (125 2-2-2)
by spd

I'm using 143 2-2-2, the user define option only lets you change the cas latency, not the mhz, so is there a way to change the mhz, if I wanted to try and hit 150 2-2-2, can you do that with an A7V? thanks..

------------------
~OC CRUSADERS~

The only way to increase memory speed with the A7V is to increase the FSB (cpu speed in BIOS) or to purchase PC150 memory. Keep in mind that raising the FSB also raises the clock speed of AGPcard, PCI cards, and hard drives. Your memory benchmarks at 7ns 143MHz should be very good with good quality RAM.

------------------
"Listen. Strange women lying in ponds distributing swords is no basis for a system of government. Supreme executive power derives from a mandate from the masses, not from some farcical aquatic ceremony."

Actually, even buying faster memory won't make the memory run faster. You have to set the memory to run at fsb+pci clock, after which upping the fsb speed (which will also increase the pci bus speed) will significantly boost your memory's speed.

------------------
OC Knight of the OC Crusaders

ABit KT7-Raid
AMD Duron 600@1066 (101x10.5)
FOP38-1 w/ Arctic Silver
256 MB of Micron CL=3 PC133@135, CL=2
30 GB IBM Deskstar GXP75
Ricoh 8x4x32x CD-RW 7080A
Pioneer 16x Slot DVD-105
GeForce2 GTS (230/394)
Diamond MX300 (Vortex2)
7650 3DMarks (Mad Onion's 3DMark 2000)

Also, you can check the mainboard information module in sandra, and it should tell you at what speed that your memory is running.

Quote:

---

Originally posted by The WhiteRabbit:
Also, you can check the mainboard information module in sandra, and it should tell you at what speed that your memory is running.

---

ok I looked at it in sandra, and it said the mem was running at 138, I saw that when I was changing the bus speeds, fsb 104, dram 138, so why does it give the option for 7ns 143, in the advanced chip menu?

------------------
~OC CRUSADERS~

Actually the memory speed is set in two places. The one that you're referring to is just where you tell your BIOS what kind of RAM you have. The second, in the Advanced Menu, actually determines whether the RAM runs at FSB or at FSB+PCI. You're just giving settings to the BIOS (in a simplifed way) so that it knows how to use the memory.

------------------
Something like 37% of statistics are made up out of thin air.

Quote:

---

Originally posted by sww:
Actually the memory speed is set in two places. The one that you're referring to is just where you tell your BIOS what kind of RAM you have. The second, in the Advanced Menu, actually determines whether the RAM runs at FSB or at FSB+PCI. You're just giving settings to the BIOS (in a simplifed way) so that it knows how to use the memory.

---

so what would be the optimum setting in the advanced menu.. user define, 7ns 143 or spd? I realize the dram freqency in the bios is at 138, that means its set for pc133, it raised with the fsb..I'm still not clear on the settings in the advanced menu

------------------
~OC CRUSADERS~

yep..overclock the fsb and you oc the ram...its how it goes..

~Share the knowledge~

------------------
OC Soldier
Sys1:[email protected]/256m/Radeon64m
Sys2:[email protected]/128m/ASUSv710032m
Sys3:p3800@896/128m/Radeon32mSDR
Sys4:Cel400@498/96m/Rage16m
Sys5:p2-233@233/128m/Gf32mDDR

Mr.White's Page
- I think my men can take care of one little penguin. - No Mr. Gates, your men are already dead. -