hi im using an a7v, and i changed the ram settings in the bios, i made it CAS2 i think. now when i boot all i hear is a constant beeping, with nothing appearing on screen. how do i fix this?? pls help..
Printable View
hi im using an a7v, and i changed the ram settings in the bios, i made it CAS2 i think. now when i boot all i hear is a constant beeping, with nothing appearing on screen. how do i fix this?? pls help..
Quote:
Originally posted by yunez:
hi im using an a7v, and i changed the ram settings in the bios, i made it CAS2 i think. now when i boot all i hear is a constant beeping, with nothing appearing on screen. how do i fix this?? pls help..
set memory to 3 and it should boot.
------------------
system specs:
Voodoo 5 5500 agp
tyan 1834d tiger 133 dual 800eb 133mhz FSB
via chipset kx133 via apollo pro (don't make this mistake)
256 MB RAM
2 maxtor 60gig ata100 drives
promise ata100 controller
liteon 52 truex cdrom
Linksys ethernet 10/100
Soundblaster Live! (what's so exciting about it??) value edition
300watt power supply (inwin)
about 7 pounds of fans (I'm not kidding)
win2000 based system
You may have to clear CMOS first, use your motherboard manual to locate the jumper.
------------------
PIII 550E at 800Mhz
Abit BF6
128Mb PC-150 Kingmax SDRAM
16mb Voodoo3 3000 AGP
Sound Blaster Live Player + Cambridge 4.1Surround
15Gb IBM 75GXP (WinME)
13.6Gb Quantum KX+ (Win2k Pro)
16x Pioneer DVD115
32x8x4 Creative IDE Recorder
V90 Netcomm 5692 PCI, EZ 10/100 NIC PCI
MS Intellieye mouse + Acer Wireless keyboard
17" LiteON monitor, 300W ATX
well it cant even get to bios, its just a blank screen with repeated beeping.
after i clear cmos how do i restore the bios? when its cleared it wont boot at all right, so how do i even get it to run aflash?
I set the SDRAM Configuration to 7ns (143mhz) instead of 8ns (125mhz). Is this CAS?
thanks for any help
[This message has been edited by yunez (edited February 24, 2001).]
If you clear the CMOS, you aren't gonna have to flash your BIOS or anything. It should just loose all the values that you have customized in your computer. If you clear it properly, it should boot, and you will just have to reconfigure all of your customized settings!
------------------
Tbird 850
Abit KT7
AIW Radeon
SB Live! X-Gamer 5.1
Win2k
SuSE 7.1
Hate to double post, but to answer your question about the 7ns, and 8ns RAM timings, this doesn't change your CAS latency. There should be an option in there that changes from 3 to 2. I forget what it says, but you change the CAS Latency settings in your BIOS, and this will make it CAS 2. I would maybe reset the value back to 8ns, or whatever. It may cause stability problems!
------------------
Tbird 850
Abit KT7
AIW Radeon
SB Live! X-Gamer 5.1
Win2k
SuSE 7.1
ok cos i changed the setting from 8ns to 7ns, and thats what caused my computer to not boot. i cant even go back to the bios to change it
so how do i clear cmos? just plug in the jumper (in the case of a7v, i have to use a tweezer cos there are no pins) and turn on the computer? what will the screen say, and when can i let go? anything else i should know beforehand?
alternatively, what will happen if i take out the ram? will the computer boot at least into bios? will this damage anything?
[This message has been edited by yunez (edited February 24, 2001).]
When the computer starts, hold the insert key and the computer should boot up. It works with my mobo.
But clear the CMOS first! Do you know how to do it properly?
------------------
AMD Athlon "Thunderbird" [email protected] (112X11 @ 1.85v)
Global Win FOP38-1 (with Artic Silver II)
Abit KT7
Corsair 128MB CAS2 PC133@150 SDRAM
IBM Deskstar 75GXP 30GB
3dfx Voodoo5 5500 AGP
ATI TV Wonder
NEC MultiSync FE950
Creative Labs Sound Blaster Live! X-Gamer
Bose Lifestyle® 3 Series II system
Pioneer DVD-115 16X
Netgear 10/100 FA310TX
Enermax EG351P-VE 330W PSU
Microsoft IntelliMouse Explorer
Microsoft Natural Keyboard Pro
Microsoft Windows ME
Mr.White's Computer Haven
no im not sure how to clear it. i know i have to connect the two solder points (a7v has no pins), can i use a pair of pliers to short it?(read somewhere that tweezers would work.) I dont know what to do after. do i let the pliers go BEFORE i turn on the computer, or keep there as i turn it on??
also, what does holding ins do?
[This message has been edited by yunez (edited February 24, 2001).]
[This message has been edited by yunez (edited February 24, 2001).]
i went ahead and used the pliers anyway, and it worked!! thanks a lot!!
you used pliers?! hah, that's awesome!Quote:
Originally posted by yunez:
i went ahead and used the pliers anyway, and it worked!! thanks a lot!!