Printable View
Ok
1) Water Cooling from Dangerden
2) Water Cooling from Swiftech
3) Water Cooling from Senfu (plycon)
4) Swiftech Heatsink and Fan
5) OCZ Gladiator w Delta
Which one
Comments?
Thoughts?
Suggestions?
Take into account price and cooling.
------------------
THUNDERBIRD 800 @ 900 MHZ
ABIT KT7a RAID
256 MB PC133 cl2
IBM HD 45 GB 7200 RPM
RADEON 32MB DDR
SB LIVE PLATINUM
CREATIVE DVD 12X W/DXR3
CREATIVE 12X-10X-32X RW
ANTEC SX830
Well anybody?
------------------
THUNDERBIRD 800 @ 900 MHZ
ABIT KT7a RAID
256 MB PC133 cl2
IBM HD 45 GB 7200 RPM
RADEON 32MB DDR
SB LIVE PLATINUM
CREATIVE DVD 12X W/DXR3
CREATIVE 12X-10X-32X RW
ANTEC SX830
I vote for 6. https://www.sharkyforums.com/images/.../2005/08/2.gif
NoiseControl Silverado HSF
But other than that I'd probably go for number 2. If I'm in the mode for watercooling.
------------------
*******************
Games and Stuff
My Specs
*****AMD Soldier*****
[This message has been edited by AMD Soldier (edited July 09, 2001).]
the water cooling is pretty risky from what ive heard, one drop of condensation and boom.
------------------
1.33 GHz AYHJA ThunderBird (CAK38 w/ Delta)
Asus A7A266
Antec sx830
Prophet II MX
SB Live! Value
Kingston NIC
Creative 52x cd-rom
some random 6x dvd-rom
60gxp 40gb
256mb Crucial PC2100
Anybody else?
------------------
THUNDERBIRD 800 @ 900 MHZ
ABIT KT7a RAID
256 MB PC133 cl2
IBM HD 45 GB 7200 RPM
RADEON 32MB DDR
SB LIVE PLATINUM
CREATIVE DVD 12X W/DXR3
CREATIVE 12X-10X-32X RW
ANTEC SX830
I would go with watercooling but that's just me. It took a while (most of the day actually) to set up my water cooling setup but it was well worth it. My temps were amazing to say the least.
JuveDuke, condensation is only an issue when you deal with peltiers, not with standard water cooling.
------------------
~ Knight of the OC Crusaders ~
My Specs at OC Gurus!
ynd - Young and Dangerous, forever.
Join SE Overclockers Seti@home Team!!
What temps is your rigg running at with the dangerden equipment?Quote:
Originally posted by ynd69:
I would go with watercooling but that's just me. It took a while (most of the day actually) to set up my water cooling setup but it was well worth it. My temps were amazing to say the least.
JuveDuke, condensation is only an issue when you deal with peltiers, not with standard water cooling.
------------------
THUNDERBIRD 800 @ 900 MHZ
ABIT KT7a RAID
256 MB PC133 cl2
IBM HD 45 GB 7200 RPM
RADEON 32MB DDR
SB LIVE PLATINUM
CREATIVE DVD 12X W/DXR3
CREATIVE 12X-10X-32X RW
ANTEC SX830
At the time I built my water cooling rig, which was last month, it wasn't so hot so the idle temp was @ 31c (my room temp is quite warm) and max load was @ 35c. These temps are without my 8 case fans (if I did add those in, I'd imagine they would sink a few degrees).
Before watercooling, I idled at about 34-35c, and max load was around 44c.
------------------
~ Knight of the OC Crusaders ~
My Specs at OC Gurus!
ynd - Young and Dangerous, forever.
Join SE Overclockers Seti@home Team!!
Silverado Noise Control all the way. Of course, I like'em quiet
never mindQuote:
Originally posted by ynd69:
At the time I built my water cooling rig, which was last month, it wasn't so hot so the idle temp was @ 31c (my room temp is quite warm) and max load was @ 35c. These temps are without my 8 case fans (if I did add those in, I'd imagine they would sink a few degrees).
Before watercooling, I idled at about 34-35c, and max load was around 44c.
[This message has been edited by scott (edited July 10, 2001).]