Sharkyextreme.com 3DMark Team

Printable View

Show 25 post(s) from this thread on one page

11-01-2002, 09:36 AM
Spawn_Mild

YES YES YES! :D .. Pyro, as promised i got a new score for u, keep in mind though this aint the end :) .. as i'm constantly ordering more hardware for more OC .. and right now i just upped the Default Vid Card settings from 275/550 to 300/610. I changed my mem timings too .. from 2.5-3-3-6 (1t disabled) i set it too 2-2-2-5-1. Oh and in the Bios i set my Graphics Aperture size from 256 to 128 .. and i got a higher score. Arent i suppose to get a higher score with the setting at 256 ?? :confused:

So from my old score of 11072 i got a near 1k boost ( a bit disappointed but nonetheless cool :D)

here is the link 12059 3dmarks

More to come :)
Spawn.
11-01-2002, 09:56 AM
ROMark5

Quote:

Originally posted by ryandinan
Any tips?

PM me.
11-01-2002, 01:46 PM
ROMark5

Quote:

Originally posted by Thermo

Well it is an old score and should be easy to beat. But then it is about time for me to do some upgrading. I have this TH7 II that is just sitting there asking for some 1066.

TH7-II requires being installed pc800 with the pc1066, or so I've heard, to get pc1066 to work on it. I've heard mixed things about it.

I'm surprised you're not beating me with your P4T533-c. PM me if you want some info on vmods and so forth for your board. :)
11-01-2002, 06:39 PM
Chuck232

Pyro, just a layout/info tip.

In the top 10 page, you should have all the RAM speeds at either DDR or non DDR speeds. It's kinda misleading wheh you see R9700 PRO RAM speeds at 340MHz and the Ti4600 RAM speeds at 770MHz..

Also, maybe open up the first column a bit so that CrawlingEye's name and number are on the same row. Just to make it look a bit better.:D
11-01-2002, 10:47 PM
ryandinan

Hey Pyro -

Okay - Here's my final score for ya - Until I figure out a way to squeeze more out ;)

CrawlingEye was kind enough to throw a few tips my way, and it helped boost my score quite a bit :D

The link to the new 3DMark project is in my sig below -
14,865 Marks baby!
That's all she's got captain! (Scotty's voice) :)

Thanks!
-Ryan Dinan
11-02-2002, 01:09 AM
mystifmagic

Quote:

Originally posted by thebove

lol.....chowder-head *shakes head*
you get your new ram yet? maybe you'll be back up in the top once you do

It is in, I just need to do some overclocking to take the number nine and ten guys. ;)

Quote:

Originally posted by Thermo

Well it is an old score and should be easy to beat. But then it is about time for me to do some upgrading. I have this TH7 II that is just sitting there asking for some 1066.

Just kidding with you thermo... there is no way in heck I will be 14k with my system. Just wanted to give you a hard time ;)
11-02-2002, 04:15 AM
ROMark5

Quote:

Originally posted by ryandinan
Hey Pyro -

Okay - Here's my final score for ya - Until I figure out a way to squeeze more out ;)

Send me another PM. :)

Quote:

The link to the new 3DMark project is in my sig below -
14,865 Marks baby!

Very nice!

Quote:

That's all she's got captain! (Scotty's voice) :)

I'm not done with you yet. :D
11-02-2002, 10:09 PM
ryandinan

Okay - I'm serious this time ;)

I finally broke the 15K barrier, and Im done....
I put this thing through the ringer, squeezing every last bit of strength out of her....

15,037 3DMarks!
http://service.madonion.com/compare?2k1=4943239
Now I'm in 4th place ;)
(thanks again CrawlingEye)

-Ryan Dinan
11-02-2002, 10:17 PM
Colossus

That is a very sweet score. I probably should get some pointers to increase my score :)
11-02-2002, 10:20 PM
Chuck232

Quote:

Originally posted by Colossus:
That is a very sweet score. I probably should get some pointers to increase my score :)

LOL, I'm jealous too. I'm gonna see if I can't beat you and get back to 9th place... and you with your Ti4400 too.:p

BTW, why don't you have your 16K+ score linked?
11-03-2002, 12:31 AM
speed freak

Quote:

Originally posted by Chuck232

LOL, I'm jealous too. I'm gonna see if I can't beat you and get back to 9th place... and you with your Ti4400 too.:p

BTW, why don't you have your 16K+ score linked?

It's his work CPU

Also, I now have 9906, only update if you have time, as it is only a 16 point increase
11-03-2002, 12:45 AM
kenrippy

Pyro,

just a note, if you didn't get my email....I am now in 1st place in the GF3 club :D same specs as before, just some minor changes/background programs killed. new score/link in sig.

btw, wish we had some more old school GF3 members here. cummon guys wherever you are ;)
11-03-2002, 12:55 AM
Colossus

Jealous of the GF4 4400???? I know I can probably hit 14K or even 14.5K... I am working on the vmod to my GF4 4400 this weekend.. So look out!!!!

Speed Freak is right. The System 1 is in my office at work. You know I was very shocked when I hit that score. I pumped up the AGP/PCI bus to 88/44Mhz and it still worked. I thought my IBM drives wouldnt be able to handle that. I dont keep it at that. But I was able to run the benchies. Anyone know of a good site I can host my pics?
11-03-2002, 01:08 AM
ryandinan

Quote:

Originally posted by kenrippy
Pyro,

just a note, if you didn't get my email....I am now in 1st place in the GF3 club :D same specs as before, just some minor changes/background programs killed. new score/link in sig.

btw, wish we had some more old school GF3 members here. cummon guys wherever you are ;)

Man, I just got rid of mine - it wasnt one of the "Ti" variants - just a good ol' vanilla GF3 (Visiontec).
I think the highest score I hit with that was....9,278
http://service.madonion.com/compare?2k1=4464980

That was before I found out all these new tricks...
Im sure I could have gotten over 10K easy...

-Ryan
11-03-2002, 04:14 AM
Voodoo 5 5500

http://service.madonion.com/compare?2k1=4944921

Pentium 4 1.6A @ 2.35ghz
P4S333 rev 1.02 bios 1007
ATI Radeon 8500 128megLELE 230/200 :( @ 275/275 :)
512 PC-2100 cas 2.5 @ 147 cas 2-3-3-6

3Dmark 10,102

Show 25 post(s) from this thread on one page