here it is
http://users.adelphia.net/~slinks/computer.jpg
Printable View
Nice clean WC work there! Whats with the 80mm sunon above the northbridge?
after removing the HSF i lost all the air movment around my NB and memory so they were heating up badly.. the 80 mm fan fit perfectly on the hold down rods for the WB, moves alot of air, and keeps everything nice and cool.. :)my memory pusses out at anything over 402mhz ddr 2-6-3-3 with the cooling, without it would be much worse.Quote:
Originally posted by Soldier_Of_Evil
Nice clean WC work there! Whats with the 80mm sunon above the northbridge?
Lol not bad. Is the Via Aqua pump quiet? Warm up the water? Im looking into WCing pretty soon.Quote:
Originally posted by Slinks
after removing the HSF i lost all the air movment around my NB and memory so they were heating up badly.. the 80 mm fan fit perfectly on the hold down rods for the WB, moves alot of air, and keeps everything nice and cool.. :)my memory pusses out at anything over 402mhz ddr 2-6-3-3 with the cooling, without it would be much worse.
I believe it's a Hydor pump...Hydor > Via.Quote:
Originally posted by Soldier_Of_Evil
Lol not bad. Is the Via Aqua pump quiet? Warm up the water? Im looking into WCing pretty soon.
Ah ok. They look quite similar. Does it rattle a bit? overclockers.com said it rattles :DQuote:
Originally posted by dudewth
I believe it's a Hydor pump...Hydor > Via.
yeah its a hydor.. its very quiet and dosent get warm at all u can look them up at dangerden... the guys there say they are equivlent to the eheim's. no vibration that i can feel ofcourse they sit on 4 rubber sucktion cups so im sure that absorbs any of the vibration b4 getting to the case. And if u do go watercooling dont go with a cheep low flow pump i would recomend atleast a 300 g/h pump i had the 185 and it just didnt get the job done.
Oh i know i know, no low flow in this system, need high flow anyway for Maze3...which is probably what i am going to get.Quote:
Originally posted by Slinks
yeah its a hydor.. its very quiet and dosent get warm at all u can look them up at dangerden... the guys there say they are equivlent to the eheim's. no vibration that i can feel ofcourse they sit on 4 rubber sucktion cups so im sure that absorbs any of the vibration b4 getting to the case. And if u do go watercooling dont go with a cheep low flow pump i would recomend atleast a 300 g/h pump i had the 185 and it just didnt get the job done.
Didn't think I wanted a new case, but I bought a new one anyway.
I've had the same Thumbscrew Case I built my first ATX computer in PII 350mhz. Yes, I stayed with the Thumbscrew Cases.
Well here it is!
http://www.bugspop1.50megs.com
o.O nice gold kingwin! I like the cable covering...though the color is a bit controvertial ;)Quote:
Originally posted by bugspop1
Didn't think I wanted a new case, but I bought a new one anyway.
I've had the same Thumbscrew Case I built my first ATX computer in PII 350mhz. Yes, I stayed with the Thumbscrew Cases.
Well here it is!
http://www.bugspop1.50megs.com
Here's a piccy of mine without the flash:
http://www.da014a0002.pwp.blueyonder.co.uk/pclight2.jpg
And one with the flash:
http://www.da014a0002.pwp.blueyonder.co.uk/pclight1.jpg
The paint job on the drives looks lots better when you look at it in person as do the cold cathode lights inside :p
But it's pretty nifty... that's my beast PC that scored a whopping 53 3DMarks in 3DMarks 2003 :D
Nice nice purewire. I have to say, best desktop ever, haha Marlboro lights (blecK! go for some Turkish Gold Camels my man (and no I don't smoke)), coke cup, ash tray, pak & sak lighter. Hah, reminds me of my house when my friends come to LAN :)
Trunks, attbi sucks bum, heh :P I can host it for you Brady.
I will post a pic of my tower once I get my smoked glass modded in and 2 LEDs (because 2 blue LED fans just aren't enough).
You getting good airflow with that PC inside that cubby-hole? Now that you're a 2.3rider you probably want maximum coolingQuote:
Quote:
Originally posted by Spartan WK
Nice nice purewire. I have to say, best desktop ever, haha Marlboro lights (blecK! go for some Turkish Gold Camels my man (and no I don't smoke)), coke cup, ash tray, pak & sak lighter. Hah, reminds me of my house when my friends come to LAN :)
Trunks, attbi sucks bum, heh :P I can host it for you Brady.
I will post a pic of my tower once I get my smoked glass modded in and 2 LEDs (because 2 blue LED fans just aren't enough).
J, I deleted my pic on my web host...thats why it's not there anymore
The temps have gone up. 43C Idle, and 50C. But that cubbyhole ends up being a wind tunnel with the 2 80mm Intakes, and 2 80mm Exhausts. Thes case looks solid but the whole front bottom is perferrated and it sucks some major air. It sounds like a wind tunnel too. OH and I cut all the cover out in the back so it's just as open as the front. I am in the market for a new desk. Gonna get one where it's out in the open.Quote:
Originally posted by sapasion
You getting good airflow with that PC inside that cubby-hole? Now that you're a 2.3rider you probably want maximum cooling
Got bored stopping smoking, so started building cases out of lego's.
Lego PCs
https://www.sharkyforums.com/
Pictured are PCs V2 and V4
V1 was a desktop configuration that looked horrible =(
V3 went up in a plume of smoke (no clue why)
I love how the door acts a passage way for the power cable. I used to be into legos a lot when i was young. I have binfuls of them.
Bah! Send em to me! Can always use more!
Toughest part of building the last one was cutting out the plexiglass for the little window =) I didn't want to just have a square shape, so I made it so it would lock into the sides.
Great work man! Although, are you going to cover up that CDROM? or did you run out of LEGO's? :DQuote:
Originally posted by dorianbrytestar
Bah! Send em to me! Can always use more!
Toughest part of building the last one was cutting out the plexiglass for the little window =) I didn't want to just have a square shape, so I made it so it would lock into the sides.
man....I've been wanting to get around to building Lego PC Cases, just been busy lately. Looks like someone beat me to it ;) Nice job
sucks if it all caves in :p :DQuote:
Originally posted by dorianbrytestar
Got bored stopping smoking, so started building cases out of lego's.
Lego PCs
http://members.cox.net/richw/2lego1.JPG
Pictured are PCs V2 and V4
V1 was a desktop configuration that looked horrible =(
V3 went up in a plume of smoke (no clue why)
That is most def one of the coolest things I've ever seen. Hah, makes me want to make a tiiight case.
It is quite perty. My favorite part is the power cord going through the door.