Printable View
No since it requires to be refilled since LN2 evaporates!!!!Quote:
Originally posted by xDUCK
Ahh, ok. So LN2 would be considered fine by your criteria, then. :p
eshbach: Yes, I dont consider that fake.. Since it can sit there running (doesnt have to be 3DMarks) IDLE...
Its hard to explain :D
LN2 doesn't have to be refilled. In fact, there are two ways to create a long-term LN2 system - you can use a stirling cycle engine to slowly create LN2, and then run it directly to cool your ethanol, or you can purchase a (very expensive) machine that converts LN2 vapour back into LN2 liquid. :p :DQuote:
Originally posted by Colossus
No since it requires to be refilled since LN2 evaporates!!!!
eshbach: Yes, I dont consider that fake.. Since it can sit there running (doesnt have to be 3DMarks) IDLE...
Its hard to explain :D
Haha! I love being right. :cool:
Sounds like a bit too impractical haha, not to mention expensive...
But nobody uses that :DQuote:
Originally posted by xDUCK
LN2 doesn't have to be refilled. In fact, there are two ways to create a long-term LN2 system - you can use a stirling cycle engine to slowly create LN2, and then run it directly to cool your ethanol, or you can purchase a (very expensive) machine that converts LN2 vapour back into LN2 liquid. :p :D
Haha! I love being right. :cool:
Most LN2 setups are just people who pour LN2 into a copper tube... If the setup can run then fine... Do you need to replenish the setup? Do you have some links? That sounds interesting..
Sure, nobody uses that, but that's because it's incredibly expensive. :) Nope, you never ever ever need to replenish the setup. Just search the web for "Stirling cycle engine". They go for tens of thousands of USD a pop, though, so they're a tad out of reach for most of us. ;) Still, consumer-level versions should be available <1k by 2005. :)Quote:
Originally posted by Colossus
But nobody uses that :D
Most LN2 setups are just people who pour LN2 into a copper tube... If the setup can run then fine... Do you need to replenish the setup? Do you have some links? That sounds interesting..
NO!!!! DONT!!! You are sounding like TB now... IS that when the 9800 Pro will be like $200 in 2005??? :DQuote:
Originally posted by xDUCK
Sure, nobody uses that, but that's because it's incredibly expensive. :) Nope, you never ever ever need to replenish the setup. Just search the web for "Stirling cycle engine". They go for tens of thousands of USD a pop, though, so they're a tad out of reach for most of us. ;) Still, consumer-level versions should be available <1k by 2005. :)
If they cost over $10k now, they wont be under $1000 in 2005 :D That is just too large of a drop :D
This doesnt look like a LN2 producer :D I need to continue to look!
http://bednorzmuller87.phys.cmu.edu/...s/demo533.html
I didn't say anything about the 9800 Pro, don't accuse me of such things.:mad:Quote:
Originally posted by Colossus
NO!!!! DONT!!! You are sounding like TB now... IS that when the 9800 Pro will be like $200 in 2005??? :D
If they cost over $10k now, they wont be under $1000 in 2005 :D That is just too large of a drop :D
I told you, I have researched this extensively... The reason they are so expensive right now is that they must be handmade, and you are essentially bearing a huge part of the R&D costs. Once they go into mass production, they will be placed into lower-end fridges (they are currently used in high-high-high end fridges). SEARCH THE WEB before you accuse me of such things. :mad:
Dork... I am searching... And Yes you do sound like him... I can read.. Can you? :D I said you sound like him from going from tens thousands of dollars to under $1000 in 1.5 years...
Do your research before insulting somebody who has done theirs. :mad:
Btw... http://www.sharkyforums.com/showthre...hreadid=206049
I am... And I am still sticking by what I said!Quote:
Originally posted by xDUCK
Do your research before insulting somebody who has done theirs. :mad:
Btw... http://www.sharkyforums.com/showthre...hreadid=206049
Relax; it'd be a shame for me to have to lock this thread until civility returns
Sorry Saps. I would hate to have that happen :)Quote:
Originally posted by sapasion
Relax; it'd be a shame for me to have to lock this thread until civility returns
Same here.Quote:
Originally posted by Colossus
Sorry Saps. I would hate to have that happen :)
maybe you should take the arguement in a PM then, as for me, I am staying out. wouldnt want it to get locked either :(
Ya...everyone chill. I'd be really really sad if this thread got locked.
Take it to CF.:D:D
yea, this thread is the glue that holds the video card forum together...
on another note, do you guys think i can get geil pc3200 golden dragon to do 240fsb with a 2.5cl? i just glued a 40mm case fan to the top of my NB heatsink and now i can boot at 240, so if i could get my ram that fast, i should break 21k, right? :D
It should do 240FSB at 5:4 but not 1:1 Maybe FSB220-225 at CL2.5-4-4-8 with added vdimm :)Quote:
Originally posted by eshbach
yea, this thread is the glue that holds the video card forum together...
on another note, do you guys think i can get geil pc3200 golden dragon to do 240fsb with a 2.5cl? i just glued a 40mm case fan to the top of my NB heatsink and now i can boot at 240, so if i could get my ram that fast, i should break 21k, right? :D
great, i can't wait for that stuff to get here so i can test it out. i tried to do a run with my current stuff on 225fsb, but it crashed before the first game i run was over. it was about 11fps faster though...
Not sure if you would break 21k, but a higher score is very possible :) How are you going to get a 240FSB with an AMD? I rarely see those kinds of FSB speeds...
well, i can boot into windows right now at 240x8 and my ram at 120mhz on 8-4-4-3 timings. i'm being very conservative though, and i'm sure i could do 240x10, but my ram doesn't like tighter timings or increased speed at all. i don't know why, but it won't even boot if i set the divider to 3:2...
That is really sweet!!! I would love to see those kinds of marks!!! If you can do it now.. Then it might be either the ram or the NB cooling/voltage...
:crosses fingers: please be the ram, please be the ram... :D
Thank You. BTW, I know how much this thread represents. If forced to lock it and it seems now that's unnecessary ;) it would have only been a temporary thing. Sort of an attention grabber.
Let's all remember to play nice. Some people are looked up by others and should try to set a good example by their conduct IMO.
Wait a minute here.... are you cranking the fsb up and using a divider (ratio) for the ram on a nforce 2?
or just going for 240 on the ram?
pc
we'll see, i don't have the ram yet. if the ram does 240, i'll be amazed and very very happy.