Printable View
Oops... That should read:
So actually I mean try both unbuffered.Quote:
One thing you can try: the Sandra buffered test is waaaay biased. Try it unbuffered and I bet you'll see a much closer range between a nForce2 platform bandwidth and a 865/875 platform bandwidth.
No you are wrong Colossus. Don't try to act like an Expert on MY board.:DQuote:
Originally posted by Colossus
EDIT:
Lets see what ABIT does with the FSB... BTW it was 250 not 255 :D
Check over at xtremesystems.org. This has been proven time and time again. It works fine to 255 but not beyond.;)
I have proven this myself. I can run fine at 255 1:1 but not even post at 256 1:1. Trust me on this one.;)
Please I dont go to that crappy forum....Quote:
Originally posted by vertices
No you are wrong Colossus. Don't try to act like an Expert on MY board.:D
Check over at xtremesystems.org. This has been proven time and time again. It works fine to 255 but not beyond.;)
I have proven this myself. I can run fine at 255 1:1 but not even post at 256 1:1. Trust me on this one.;)
But whatever we shall see :D
Ok...if you don't like that forum, how about Abit's own forums?
http://forum.abit-usa.com/showthread...ght=11+255+IC7
Colossus,
When you have time can you update me please?
Thanks.
CPU:XP 2500 Barton
Stock speed of cpu:1.84
Actual speed of cpu:2205
Motherboard:Abit NF7-S
Ram:OCZ 3500 EL DC 512 MB
Video Card: 5900 Ultra
Stock core of video card:450
Actual core speed of video card:560
Stock mem of video card:850
Actual mem of video card:983
Cooling:Air cooling
Score with link:
3D 2003 6937
http://service.futuremark.com/compare?2k3=1184456
3D 2001 17500
http://service.futuremark.com/compare?2k1=6884825
Hey Ryder nice 03 score. Are you just easing into OCing that Barton or is that all she's got.
Thanks.
I cant seem to get much above that without getting
errors,3d mark 01' will finish but 03' im getting corruption
messages.im already running my vcore at 1.85.
With proper cooling 2v is usually safe; especially for a short term record setting run.Quote:
Originally posted by Ryder
Thanks.
I cant seem to get much above that without getting
errors,3d mark 01' will finish but 03' im getting corruption
messages.im already running my vcore at 1.85.
Well i guess ill give it a try up to 2v tmrw morningQuote:
Originally posted by sapasion
With proper cooling 2v is usually safe; especially for a short term record setting run.
when its cool,the ambient temp right now is 88f
and im idling at 41.5c.Im running a SK6 with
a 8k 60mm delta, -yikes what
a shrieking noise! :eek:
(i replaced the 6800 delta today
and it dropped 2c)
All updated bro!
Nice 2003 score... I guess I should work harder at breaking 7k so I can keep #2 since you are right on my butt!!! :D
Quote:
Originally posted by Ryder
Colossus,
When you have time can you update me please?
Thanks.
CPU:XP 2500 Barton
Stock speed of cpu:1.84
Actual speed of cpu:2205
Motherboard:Abit NF7-S
Ram:OCZ 3500 EL DC 512 MB
Video Card: 5900 Ultra
Stock core of video card:450
Actual core speed of video card:560
Stock mem of video card:850
Actual mem of video card:983
Cooling:Air cooling
Score with link:
3D 2003 6937
http://service.futuremark.com/compare?2k3=1184456
3D 2001 17500
http://service.futuremark.com/compare?2k1=6884825
Thanks Colossus!
Im looking for a 7k 03' soon. :)
-now i need to do something for
my crappy 01' scores :(
When you have a chance i also
changed my mobo and memory.
Thanks.
Motherboard:Abit NF7-S
Ram:OCZ 3500 EL DC 512 MB
Therein lies a major limiting factor for you. SK-6 is barely adequate for the job. I cannot stress how much further your OC could be with superior cooling. If you could run 2.4Ghz with that Barton you'd surely be right there with the #1 score in 03Quote:
Originally posted by Ryder
Well i guess ill give it a try up to 2v tmrw morning
when its cool,the ambient temp right now is 88f
and im idling at 41.5c.Im running a SK6 with
a 8k 60mm delta, -yikes what
a shrieking noise! :eek:
(i replaced the 6800 delta today
and it dropped 2c)
I was thinking of going with the SLK-800 and a 80mmQuote:
Originally posted by sapasion
Therein lies a major limiting factor for you. SK-6 is barely adequate for the job. I cannot stress how much further your OC could be with superior cooling. If you could run 2.4Ghz with that Barton you'd surely be right there with the #1 score in 03
Torando but im concerned i will have clearance
problems with my Northpole nb cooler.
WOOT WOOT ITS HERE AND INSTALLED, IC7-G BABY.. TIME TO GET INTO THE TOP FIVE AGAIN