OMG my radeon8500 does 300/320 speeds from 250/275 stock!

<with nvidia cards and rivatuner I can set mipmap to 3 and make nature and everything else really blurry but I gain a few hundred marks>

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

so what you are saying is you whore the performance of the benchmark to get a higher score???

how many of your, ahem, scores, are punched out with artifacts and blurryness.

i admit you definately are a nut case with older cards, but just like your sig spouting your overclockedness (2.47 gig), no one knows two things, what is your everyday running MHZ/FSB (still a mystery and unfair when posting to a newb, they think you are running that speed, which you are not on a day to day basis) and the 3DMark scores you have been attaining, are they clean or????????????????????

ever heard of the omission factor???? you definately are the king of that now.

whatever.

baldy:cool:

Quote:

---

300/320 and I have not done a v mod yet either. My ram almost did 330 but it artifacted like made 10 seconds into nature. a V mod should get me to 330-340 easy. As for the core, it doesnt even feel hot, just warm when I touch the back of the card. A v mod should get the core at least 10MHz higher. I will do a v mod later on, in no rush now, wanna try that bad boy on some games for now and see if I can break 13k before a v mod. as for le speeds, the core was le speed, but the ram was not and by special edition its 3.3ns ram dude, man even my 3.3ns ram on my special edition(not se "slow edition") only does 295(590 in sdr) as for 3dmark profile, I need to find where it is, if you can help me out?

---

[SIZE=4]There are no "special/slow editions" of the 8500. Retail, LE, LELE. What I was getting at is that since your core was LE speed...the card is an LE. Don't argue it, it actually makes everything look more impressive.:)

Quote:

---

<with nvidia cards and rivatuner I can set mipmap to 3 and make nature and everything else really blurry but I gain a few hundred marks>

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

so what you are saying is you whore the performance of the benchmark to get a higher score???

how many of your, ahem, scores, are punched out with artifacts and blurryness.

i admit you definately are a nut case with older cards, but just like your sig spouting your overclockedness (2.47 gig), no one knows two things, what is your everyday running MHZ/FSB (still a mystery and unfair when posting to a newb, they think you are running that speed, which you are not on a day to day basis) and the 3DMark scores you have been attaining, are they clean or????????????????????

---

If you are making everything "really blurry"-don't compare an ATI against an Nvidia card. Your test bed would OBVIOUSLY be in favor of the Nvidia card.
His 2.47ghz o/c was not stable under Prime95. I *think* it crashed after five minutes.

"I have a lot of respect for TBird, dispite the fact that he thinks his comp can play HL2 at 2048x1536, lol."



I am not sure how high the fps will be, it could be as low as 5fps and thats something everyone wants to hear on my hardware anyway but maybe I have underestimated my rigs powers :D


"how many of your, ahem, scores, are punched out with artifacts and blurryness."


no artifacts, those actually hurt performance and all those guys getting high scores make it twice as blurry as me and do other tweaks few of us even know


"Don't argue it, it actually makes everything look more impressive."


ok then, my 8500le with 3.3ns ram did 300/320 :) totally eats your le too :D and didnt even do a v mod yet :D


"His 2.47ghz o/c was not stable under Prime95. I *think* it crashed after five minutes."


try 5 seconds :eek: additionally, prime95 doesnt mean much to me except hardcore stability and besides Ill probably run xp2700 speeds or so for everyday use, havent decided yet but im runing 2GHz at 166fsb for now.

Quote:

---

ok then, my 8500le with 3.3ns ram did 300/320 totally eats your le too and didnt even do a v mod yet


"His 2.47ghz o/c was not stable under Prime95. I *think* it crashed after five minutes."


try 5 seconds additionally, prime95 doesnt mean much to me except hardcore stability and besides Ill probably run xp2700 speeds or so for everyday use, havent decided yet but im runing 2GHz at 166fsb for now.

---

Five seconds of Prime95, but it could run 3DMark??? Shows what kind of a program 3DMark is for stress testing. It would have crashed if you ran it in software mode though.:)

Why do you have to add the part about my card being slower than yours? Its quite obvious!:eek: The pencil trick didn't work for me either, so I wiped it off...meaning I did this overclock on an UNDERVOLTED card.

"It would have crashed if you ran it in software mode though."


I should try that then. I remember getting prime95 stable to about 1.8GHz but 3dmark ran fine at 2.09GHz when I had stock cooling. My guess is ill have to run xp2700 speeds, give or take 50MHz for prime95 to be stable. Just because mine ocs like a champ and to anyone else getting godly oc's it may not be 100% stable, but 99% stable :) :D


"The pencil trick didn't work for me either, so I wiped it off...meaning I did this overclock on an UNDERVOLTED card."


I did not try the pencil trick and your card is slower than mine, but I am not dissing your card, its your cpu that you need to work on, much more important than worrying about the card anyhow.


also yours came at 230 core------------->290 thats +60MHz
mine came at 250 core------------------->300 thats +50MHz


Thus your core overclocks better and as for your ram, its not 3.3ns so I am not supprised. actually 320MHz is nice even for 3.3ns. I wish they actually used decent ram on ti4200s :mad: I hate it when the ram on mx440s, ti500s and radeon8500s overclock way more than ti4200s ram! why use good ram on slower cards? :confused: :mad:
as for undervolted, probably by just a bit and its the core limiting you, not the voltage seeing the mod did zilch

Quote:

---

as for undervolted, probably by just a bit and its the core limiting you, not the voltage seeing the mod did zilch

---

I checked with a multimeter, both the core and RAM are undervolted when compared to a Retail 8500.:mad:

Like you said though, the CPU is what I should work on...and I plan on doing just that with a Barton in Dec.:)

You did it again, sidestepped a direct question.

What speed are you running the 2000+ you have on a daily basis, not what its ultimate clockage is when benching and pumping 2.2 through the core???

First, I am just curious, and second, again I allude to your sig, it is misleading at best, especially for newbs that look to these nuggets of info. Heck, I look at this info just to get a feel for what other people are running in comparison to my clockage.

And, no matter what you say, if Prime dies in 5 seconds, it is not stable by any definition of the word.

baldy:D

Quote:

---

Originally posted by KaoTiK
What's with everyone hammering on TBird even worse now? I mean... of course, when he says something naive, you can get at him, lol, but why worry about him doing this stuff? It's his hobby, and he's pretty hardcore... honestly, he has to be the most hardcore overclocker/tweaker on this board. He may not get the best scores overall, but he damn well gets awesome scores for the hardware he uses. He's quite obviously good at it... Who else has gotten a XP2000+ to 2.47GHz? Also, isn't that what this board is all about? Being an enthusiast and talking about it? He's f-ing dedicated, I mean, look at the time he spent finding out max overclocks on all those vid cards, etc.

I have a lot of respect for TBird, dispite the fact that he thinks his comp can play HL2 at 2048x1536, lol.

---

My thoughts exactly, he loves this $hit just as much as we do, I say leave the guy alone, were all here cause of the same thing, we dig puters.

Hey T-Bird

Hi, I'm one of those lucky ones who got the Retail Radeon 8500 128MB, which runs at a stock 275/550. I've seen some impressive OC's coming from 8500s LE's, including yours. If I have a retail 8500 128, how much can I expect from this chip OCing?, I put it in 320(Memory) and I got artifacts. Any advice?. I should be getting better speeds, i suppose.

your ram probably is not 3.3ns like mine is. lower it to 310 and see how it goes, also oc the core up 5MHz at a time and be careful!

Where you live Tbird?
I want you to come over to my house and work your magic on my setup, I bet you could squeeze more outta this than I could!

lives in Florida from what i gather,

and this is a trick question, you weren't serious, were you???

if you were, i am laughing already.

baldy:D

One of my boxes has an 8500LE and that biotch won't do but 245/245
artifact free. It'll go up to 260/260 but looks like hell. :(

Quote:

---

Originally posted by gurutoo
One of my boxes has an 8500LE and that biotch won't do but 245/245
artifact free. It'll go up to 260/260 but looks like hell. :(

---

you know you can run the core async of the ram, use powerstrip for that. 245 is a low oc for the core. I understand many le's use crappy ram, but generally, the cores are good for around 275. also many le's are undervolted so a pencil trick might work. you could get 290/270 after the pencil trick and using powerstrip :)

Quote:

---

Originally posted by bldegle2
lives in Florida from what i gather,

and this is a trick question, you weren't serious, were you???

if you were, i am laughing already.

baldy:D

---

Sure I am serious, Tbird knows his stuff when it comes to overclocking;)