OK I think I'm ready to mod my vid card.

Quote:

---

Originally posted by Chuck232
If you're up and running after the flash, you're looking good!:D Just o/c a little bit and see if you get and improvements. Using the fill rate test in 3D Mark is easiest to see.

---

Well I'm not getting much of an increase in the fill rate but my score went from 3619 to 3849. I used to have to OC my cpu to 2.2GHz to get the 3619, and I presently have my cpu at stock and I got the 3849. BTW my card is at 303/303(606).

http://service.futuremark.com/compare?2k3=1294053

Oh, nah I meant to see if you're actually o/cing, I guess you are cause you're getting higher scores.

Hey thanks for the help chuck. I'm at 309/305(610) right now, anything higher seems to artifact. I'm gonna start testing and reOCing my CPU later today. And again thanks man.:D

Some 9500NP did come with L shaped memory but I have never seen A 9500P with L shaped memory. Ati did rig some 9700s with L shaped 128bit memory and gave to review sites but that is all I know about.

Anyways, did you try rage tweak 3.9 before you flashed your card? Some clock-locked cards can be overclocked without a bios flash. Also if you used warps bios you got the bios thats for hynix memory 3.3ns. I dont think it will hurt the card but the ram timings will be off. My 9500p overclocks to 335/330 FYI.


Take a look at this guide from rage3d and you will know what I am talking about. Sorry I didnt post earlier but I fell asleep. :)



http://www.rage3d.com/board/showthre...eadid=33681382

Quote:

---

Originally posted by BL1NK
Some 9500NP did come with L shaped memory but I have never seen A 9500P with L shaped memory. Ati did rig some 9700s with L shaped 128bit memory and gave to review sites but that is all I know about.

Anyways, did you try rage tweak 3.9 before you flashed your card? Some clock-locked cards can be overclocked without a bios flash. Also if you used warps bios you got the bios thats for hynix memory 3.3ns. I dont think it will hurt the card but the ram timings will be off. My 9500p overclocks to 335/330 FYI.


Take a look at this guide from rage3d and you will know what I am talking about. Sorry I didnt post earlier but I fell asleep. :)



http://www.rage3d.com/board/showthre...eadid=33681382

---

I'll check that out later. Yeah I fell asleep last night too. ;) Thanks to you too.

You're probably hitting the limits for the RAM. Are you sure your core can't go further either?

Quote:

---

Originally posted by Chuck232
You're probably hitting the limits for the RAM. Are you sure your core can't go further either?

---

Well I'm just of the school of thought that you take these things slowly. BTW here's a new score with a new OC on the cpu (1833, 11x166) and the vpu (309/305[610]) I am one point away from 4000.

http://service.futuremark.com/compare?2k3=1294475