Printable View
definitely. the case width is about 7 1/2", and a 120mm is approx. 5 1/2".Quote:
Originally posted by punkrunning
I just saw in the anand forums that someone modded a 120mm side intake into their window which looked pretty sweet. Anyway, I have another question for someone with the case. Is there room where the top blowhole is to enlarge it into either a 92mm or a 120mm? Thanks.
i think he's worried about space behind the current hole to be able to fit a 92mm or 120mm in there without it hiting the PSU.Quote:
Originally posted by serotone9
definitely. the case width is about 7 1/2", and a 120mm is approx. 5 1/2".
it looks pretty tight to me, not sure if you'll be able to do much more with it aside from removing the stock grille in the metal
https://www.sharkyforums.com/images/...2004/11/50.jpg
hmm, i see what you mean. but couldn't you just mod it forward? any case is going to have the psu there. i don't see a problem with going forward as long as you maybe don't put an optical drive in the top bay (for a 120mm, a 92 might still fit even then). then just get some sort of mesh or something to finish it off, b/c you wouldn't be able to make it perfectly round in back. i.e., do it square like the original, only bigger. :cool:Quote:
Originally posted by thebove
i think he's worried about space behind the current hole to be able to fit a 92mm or 120mm in there without it hiting the PSU.
it looks pretty tight to me, not sure if you'll be able to do much more with it aside from removing the stock grille in the metal
I cut my own window out of the side with a 120mm fan in it. I also bought a window for the top with 3 90mm fans cut outside in it..but the problem is, i cant put it anywhere on my case without it hitting the PSU...any ideas?
Remove the fan from the top window that goes above the PSU and replace the PSU with one that has a top fan.