Article

Quote:

---

Originally posted by Vindir:
Err I saw the last pic. A question though, there isn't any reply link on the forums there??? Where is it hidden?

---

Its there just have to look. Are you going to the overclocking case mod section??

------------------
Knight of the loyal order to overclock the H... out of your chips.

750 Athlon Classic O\C to 1090MHz
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on

I really like the site Colt. I enjoyed the computer project a lot. I'm sure I'll learn a lot from it too. I can't wait to see what else you're going to do with that case. My next computer is definitely going to have a custome case (this one didn't in my sig only because I had to get it built quick before I went off to school).

Anyway, great site and I'm anticipating the next stage of the case mod. I also have your site listed in my favorites. https://www.sharkyforums.com/images/.../2005/08/2.gif

------------------
AMD 1.2GHz T-Bird @1.33GHz 280MHz FSB (9.5x140, trying for higher OC)Cooled by BigMoFoHo HSF
Arctic Silver Thermal Compound
KT7A-RAID
512MB Crucial PC133 CAS2 ECC RAM
All-In-Wonder Radeon 32MB DDR
Soundblaster Live Platinum 5.1
Custom Built Madisound LEAP designed speakers
Pioneer 16x DVD
Sony Spressa 12x8x32 CD-RW
2-45GB IBM DeskStar 75GXP HD in RAID-0
Tornado 1000 Case
Viewsonic 19" PF790 Perfect Flat Monitor

Quote:

---

Originally posted by Samjham:
I really like the site Colt. I enjoyed the computer project a lot. I'm sure I'll learn a lot from it too. I can't wait to see what else you're going to do with that case. My next computer is definitely going to have a custome case (this one didn't in my sig only because I had to get it built quick before I went off to school).

Anyway, great site and I'm anticipating the next stage of the case mod. I also have your site listed in my favorites. https://www.sharkyforums.com/images/.../2005/08/2.gif

---

Thank you. You will not be dissapointed on the out come promise. https://www.sharkyforums.com/images/.../2005/06/5.gif
This article will take everyone through pelts, water, overclocking the works, so enjoy, I am having a blast.



------------------
Knight of the loyal order to overclock the H... out of your chips.

750 Athlon Classic O\C to 1090MHz
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on

Colt i could use some of your advice https://www.sharkyforums.com/images/.../2005/06/5.gif

I can get panit to stick to the plastic on my case, i've sanded cleaned it so many times but the stuff wont stick. ??

Also my trusty old skill jigsaw is getting a bit tired (the blade keeps falling out) http://dev.www.sharkyforums.forums.relay.cool/ . Can you recommend a good trade quality one ?

Thanks mate.

------------------
Duke FaTs Of OC
OC Crusaders
Mr Whites PC Place - My specs

Quote:

---

Originally posted by Colt:
Its there just have to look. Are you going to the overclocking case mod section??

---

It's ok I figured out the problem. You guys don't like me cause I'm a netscape user http://dev.www.sharkyforums.forums.relay.cool/ It's ok. I understand! Really!

------------------
Marquis Vindir of the OC Crusaders
Holding Boundaries and Breaking Barriers

Fool that I was, I foamed in my wickedness as the sea and, forsaking Thee, followed the rushing of my own tide, and burst out of all Thy bounds. The madness of lust held full sway in me. - Aurelius Augustine

Quote:

---

Originally posted by FaTs:
Colt i could use some of your advice https://www.sharkyforums.com/images/.../2005/06/5.gif

I can get panit to stick to the plastic on my case, i've sanded cleaned it so many times but the stuff wont stick. ??

Also my trusty old skill jigsaw is getting a bit tired (the blade keeps falling out) http://dev.www.sharkyforums.forums.relay.cool/ . Can you recommend a good trade quality one ?

Thanks mate.

---

First off what type of primer are you using. And before you spray that use a deglosser or even some paint thinner to wipe the plastic down first, this will take the sheen off the plastic. Then a good automotive primer will work fine, Spray on very light coats with a light sanding of 220 wet Make sure you use the water, paper inbetween each coat of primer. Should do you just fine.
About three light coats and because automotive primer is sandable in 15 min it does not take long.

Jigsaw, the one I use in the pic is by dewalt.
Would have bought a portacable but the one I wanted was not on the shelves yet. There are three commercial grade I recomend all have Variable speed and orbiting action. The first and least expensive about 150 US is the portacable. then dewalt, 180 us, then millwakie, 170 us.
All three have quick blade change feature which requires no tool just a turn or flip[ of a lever, they can use any blade on the market no matter what style the end is. Bosh blades are the best quality blades on the market. Unfortunatly if those are a little rich, though they will last you a lifetime, the next home owner, contractor grade would be Ryobi, (dont tell anyone I said that). It is about 100us and is decent but the life span is short, The one thing I have learned in my trade is pay the extra 50 now or you will pay three times that latter.



------------------
Knight of the loyal order to overclock the H... out of your chips.

750 Athlon Classic O\C to 1090MHz
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on

Very Nice Colt. I like the uncluttered look. I can't stand sites that try and make there sites like a work of art and in the process make it difficult to navigate.

I liked the VT6X4 article. I thought I was the only one who bought that board until today. https://www.sharkyforums.com/images/.../2005/08/2.gif

I saw you went outside the lines with your jigsaw,tisk tisk. Go to Wal-Mart and get a coloring book and pratice drawing inside the lines, now.J/K

------------------
I am an enigma in my families gene pool.

I'm in awe!
And the site went straight to my favorites...

------------------
GO FOR THE EYES BOO!! GO FOR THE EYES!!

Quote:

---

Originally posted by FaTs:
Colt i could use some of your advice https://www.sharkyforums.com/images/.../2005/06/5.gif

I can get panit to stick to the plastic on my case, i've sanded cleaned it so many times but the stuff wont stick. ??

Also my trusty old skill jigsaw is getting a bit tired (the blade keeps falling out) http://dev.www.sharkyforums.forums.relay.cool/ . Can you recommend a good trade quality one ?

Thanks mate.

---

Have you ever tried using the paints that they make for plastic car models? If you go to the hobby stroe you should be able to find them. I've been wanting to try this because Testors makes these totally awsome metalizer paints that actually use metal dust (I think) in them. I've used them on models and I swear to God the stuff looks exactly like real metal. You actually buff the paint once it's dry (which dries super quick, like 5min max) and it makes the paint really nice. I can't remember now what different metals they have, but I remember using aluminum on a Mercedies CLK-GTR model and it looked absoloutly amazing. Everyone thought the body was made out of a piece of aluminum. One you buff it then you have to put a clear sealer on it too otherwise the metal dust can rub off eventually, but the stuff looks really nice. Only draw back is that it's a little expensive, but if you're already spending a ton on your computer it should just be a drop in the bucket. When I put it on I used an air brush, but the paint is so incredible thin that you could probably brush it on too without getting any drips. It's the consistency of alcohol. Any runs or streaks you get from the brush should also be able to be buffed out, so if you don't have an air brush you probably wouldn't need to buy one. Well, I hope this helps and have a blast building!


------------------
AMD 1.2GHz T-Bird @1.33GHz 280MHz FSB (9.5x140, trying for higher OC)Cooled by BigMoFoHo HSF
Arctic Silver Thermal Compound
KT7A-RAID
512MB Crucial PC133 CAS2 ECC RAM
All-In-Wonder Radeon 32MB DDR
Soundblaster Live Platinum 5.1
Custom Built Madisound LEAP designed speakers
Pioneer 16x DVD
Sony Spressa 12x8x32 CD-RW
2-45GB IBM DeskStar 75GXP HD in RAID-0
Tornado 1000 Case
Viewsonic 19" PF790 Perfect Flat Monitor

I never though of that,thanks for the suggestion.

------------------
Duke FaTs Of OC
OC Crusaders
Mr Whites PC Place - My specs

Quote:

---

Originally posted by CajnDave:
Very Nice Colt. I like the uncluttered look. I can't stand sites that try and make there sites like a work of art and in the process make it difficult to navigate.

I liked the VT6X4 article. I thought I was the only one who bought that board until today. https://www.sharkyforums.com/images/.../2005/08/2.gif

I saw you went outside the lines with your jigsaw,tisk tisk. Go to Wal-Mart and get a coloring book and pratice drawing inside the lines, now.J/K

---

I will let them know about the site thanks.
I know I was sick the day they had coloring inside the lines in kindergarden, Its been haunting me eversense. https://www.sharkyforums.com/images/.../2005/06/5.gif


------------------
Knight of the loyal order to overclock the H... out of your chips.

www.nikeotroniks.com

750 Athlon Classic O\C to 1090MHz
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on

Sweet site, so is that yours? There are some nice articles too.

------------------
Knight of the OC Crusaders

Quote:

---

Originally posted by winky:
Sweet site, so is that yours? There are some nice articles too.

---

Thanks, it is not my site, they just invited me to be part of their crew.



------------------
Knight of the loyal order to overclock the H... out of your chips.

www.nikeotroniks.com

750 Athlon Classic O\C to 1090MHz
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on

Colt, you should make the link to the (your) site active in your sig https://www.sharkyforums.com/images/.../2005/06/6.gif.

------------------
A Knight of the OC Crusaders
This is your life, good to the last drop and it's ending one minute at a time
My System Specs at Mr.White's Place

Quote:

---

Originally posted by bobgod007:
Colt, you should make the link to the (your) site active in your sig https://www.sharkyforums.com/images/.../2005/06/6.gif.

---

One more thing to do, I know, been meaning, I know it wont take long, but damn it keep for getting. https://www.sharkyforums.com/images/.../2005/06/5.gif
Doin it right now



------------------
Knight of the loyal order to overclock the H... out of your chips.

www.nikeotroniks.com

750 Athlon Classic O\C to 1090MHz
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on