Hey Wurm. You havn't had any problems w/ those 60gxps right next to each other? You have the little exhaust hole or whatever covered. Just wondering.
Printable View
Hey Wurm. You havn't had any problems w/ those 60gxps right next to each other? You have the little exhaust hole or whatever covered. Just wondering.
Mine isn't all that, but here.
http://neorevolutionary.tripod.com/0.jpg
there are like 6 other pics, just change the 0 to 1, 2, 3, ext.
Not really modded, just some nice accesories, and some good cabling ;).
edit: you know the routine, drag to the address bar ;).
very very nice:D I especially like the Sun monitor that thing is kickassQuote:
Originally posted by pudad
Mine isn't all that, but here.
http://neorevolutionary.tripod.com/0.jpg
there are like 6 other pics, just change the 0 to 1, 2, 3, ext.
Not really modded, just some nice accesories, and some good cabling ;).
Thanks :), I get that a lot:o .Quote:
Originally posted by fbs1992
very very nice:D I especially like the Sun monitor that thing is kickass
Hey, fb2 1992, you have a really awsome setup too. Love that mobo too ;) (lol kt333 version of the mine basically ;)).
Would it hurt for you too space those hdds a bit? Or maybe slap that hdd try back in and have them way spaced and have some hdd cooling too. It is just one of those things that I like to warn people about :).
theyll be alright.;)
ive got all my important stuff backed up on another computer
ok, do your thing.Quote:
Originally posted by fbs1992
theyll be alright.;)
ive got all my important stuff backed up on another computer
Lt. pudad, I followed your advice and added a 80mm to cool mine. Thanks it looks good and it reassures me that they won't fail for heat reasons.
:D :D
No thats just the angle of the picture. they are about 7mm apart and if you notice the reason they are sticking out so far is there is a highspeed 80mm fan blowing cool air directly on and around them. and if you take a look belowQuote:
Originally posted by pudad
Hey Wurm. You havn't had any problems w/ those 60gxps right next to each other? You have the little exhaust hole or whatever covered. Just wondering.
http://www.actvsdei.com/~wurm/outside.jpg
the digidoc 5 is monitoring the temps of my whole system ;)
my case temps are 27 to 28°c and my CPU runs around 51°c full load running SETI. I just ordered a
http://www.listan.de/images/produktb...98/k0098_m.jpg
Coolermaster HHC-001 Heat Pipe
and a
http://www.listan.de/images/produktb...69/z0069_b.jpg
Fan-Adapter, Aluminium, 60-92mm, silber
and finally
http://www.listan.de/images/produktb...36/l0036_b.jpg
92mm 50,3CFM = 85,50 m3/hr @ 31,9 dBA
So I'll be ready to finally unlock my CPU to see what it can really do :D
Wurm that coolermaster doesnt do to well. it works wonders if you have a T-bred because they run hotter and the heatpipe doesnt really have much of an effect until temps start to get high. I would suggest something else. Tt volcano 7+, Thermalright AX-7, or SLK-800 for overclockin
Nope I did days of research on the latest HSF and the Coolermaster clobbered the Tt volcano 7+, and considering Im putting a 92mm fan on it... I don't think I'll have any problems at all ;)
(I am/was interested in the volcano 9, but no one has seemed to test it yet....)
http://lightbulb8817.tripod.com/pictures%20p4.htm
It's just too bad my motherboard died.
I will post pics of my amd system once my p4 system is up and running.
Wurm, you should consider changing fan adapters to one with better air-flow. The funnel-styled adapters if anything lose airflow.
Here's a pic and link of a very nice one (click picture):
http://store6.yimg.com/I/sidewinderc...s_1692_1117632
Thanks Mark!
I know there is about 7mm space between the drives w/ that antec, but is that reallym enough? Hmm, it maybe.
It is trust me on this one.Quote:
Originally posted by pudad
I know there is about 7mm space between the drives w/ that antec, but is that reallym enough? Hmm, it maybe.
The 80mm keeps them at about +/-1 degree above room-temp depending on the time of year.. Gawd I hate summer :-/
What is the cfm rating on the ones you use?Quote:
Originally posted by Wurm
It is trust me on this one.
The 80mm keeps them at about +/-1 degree above room-temp depending on the time of year.. Gawd I hate summer :-/
hey mystifmagic
did you have any trouble with that top mounted fan, when my fan is in that position it starts to get much louder then it is when it is sideways....
Not a single problem, it sounds the same regardless of its posistion. Good Luck ;)Quote:
Originally posted by JeffCT83
hey mystifmagic
did you have any trouble with that top mounted fan, when my fan is in that position it starts to get much louder then it is when it is sideways....
Right on man! BTW, you have the most badass sx1030 like case I have seen :).Quote:
Originally posted by TAZTG
Lt. pudad, I followed your advice and added a 80mm to cool mine. Thanks it looks good and it reassures me that they won't fail for heat reasons.
:D :D
Hey Spartacus is looking good. What kind of MOBO is that? Are you planning on Painting the drives to match? Sweet Case keep up the modding... Oh Yea is that (Ask the 8 Ball) on the top of your Desk??? I use to have one.. LOL:DQuote:
The one in the pic is an 8kha+, the one he currently has is an 8k3a.Quote:
Originally posted by TAZTG
Hey Spartacus is looking good. What kind of MOBO is that? Are you planning on Painting the drives to match? Sweet Case keep up the modding... Oh Yea is that (Ask the 8 Ball) on the top of your Desk??? I use to have one.. LOL:D
Thanks, it's an 8K3A+ (see site for details). My case has looked like this for quite awhile, I just thought I would add it to the new forum. I do not plan on painting my drives; I do however plan on stealthing them shortly (I know I've said that a million times). Also water-cooling and new upgrades will be in order soon as well. :)Quote:
Originally posted by TAZTG
Hey Spartacus is looking good. What kind of MOBO is that? Are you planning on Painting the drives to match? Sweet Case keep up the modding... Oh Yea is that (Ask the 8 Ball) on the top of your Desk??? I use to have one.. LOL:D
Yes that's a magic 8-ball, and there is a lights-out cube hiding up there as well. Keep up the great modding yourself, as I've said before you do top notch work. Good Luck :)
Pudad is correct, the pictures are a bit aged (back when I had my 8KHA+) ;)Quote:
Originally posted by pudad
The one in the pic is an 8kha+, the one he currently has is an 8k3a.
47cfm I have two in the front sucking and two in the back blowing.Quote:
Originally posted by pudad
What is the cfm rating on the ones you use?
At the moment Digidoc says the my case temp is 26°c my HDDs 28c° and my CPU 47°c
This fall (saving the money up bit by bit that my wife doesn't spaz on me....again :p ) I am planning on getting a
https://www.sharkyforums.com/ https://www.sharkyforums.com/
(just the radiator kit) and hooking up some kickass watercooling. When that happens I'm going to finally do the window mod and finish the rest of my case as well.