nice job gary. but wow, this thread is old.
Printable View
nice job gary. but wow, this thread is old.
I got them from Mouser electronics.Quote:
Originally posted by Gar
I have a couple questions as well, first off where did you get those right angle connectors, they seem like they would come in handy in many situations.
Secondly, did you plan on leaving any room for possible expansion? It looks like you used up all your connectors already, so would you add more molex connectors on the back of your PSU or possibly daisy chain a connector with 3 or 4 connectors on it instead of 2?
When I change the drive configuration I will add another connector to the existing cable, or make a new cable from the PSU to the drives.
It has been quite a while since I did this, I have done another PSU for my computer, you can see it HERE.
Gary
Very nice Gary as usual!Quote:
Originally posted by Gary UT
I got them from Mouser electronics.
When I change the drive configuration I will add another connector to the existing cable, or make a new cable from the PSU to the drives.
It has been quite a while since I did this, I have done another PSU for my computer, you can see it HERE.
Gary
may I ask which sleeving kit you used? I ordered the flexofit but I heard it doesn't come out as nice as taking the molex plugs out.
Which kit do you recommend.
Hey Colossus, what's the 411 on the server case?
Slight hijack......sorry. (old threads are usually forgiving)
Does anybody know which kit he used?
He probably didn't use any kit, more than likely he just bought some flex sleeving by the foot and some heatshrink and went from there.
I did not use a kit.
I purchased the sleeving and shrink tube from Wirecare.com .
They don't have the absolute best prices, but they have THE BEST selection, and they ship orders FAST.
I use 1/8" sleeving for the fan wires, 1/4" on the drive power lines, and 1/2" on the ATX cable.
Gary
Thanks that was very helpful