Nice score KaoTiK! :)
-looks like i'll be bumped down
a notch very soon too!
Printable View
Nice score KaoTiK! :)
-looks like i'll be bumped down
a notch very soon too!
Kaotic, do you have a win2k disk? I noticed Mikead hit 29k at 220x11=2.42GHz, this is 1k marks above your 250x10 clocks. I noticed most of the gains where hes beating you is in car low and drag low :confused: Is your cpu a claw or a newcastle? that car low and drag low arent so good for a claw at 2.5GHz and I doubt winxp hurts you like that, its supposed to take a few fps off in every test, not a whole bunch in 1 or two tests :confused: as for Intel's p4 yes they cant hold a candle to the a64s, theres more than 2GHz gap now between claw and any non p4ee. Even vs. my newcastle, youd need like 4.5GHz on the p4 to match me LOL
Yes it's a Clawhammer. I still have more messing around to do though, soon I'm going to start OCing the X800 as well and see what kind of marks I can get.Quote:
Originally posted by Thunderbird1GHz
Kaotic, do you have a win2k disk? I noticed Mikead hit 29k at 220x11=2.42GHz, this is 1k marks above your 250x10 clocks. I noticed most of the gains where hes beating you is in car low and drag low :confused: Is your cpu a claw or a newcastle? that car low and drag low arent so good for a claw at 2.5GHz and I doubt winxp hurts you like that, its supposed to take a few fps off in every test, not a whole bunch in 1 or two tests :confused: as for Intel's p4 yes they cant hold a candle to the a64s, theres more than 2GHz gap now between claw and any non p4ee. Even vs. my newcastle, youd need like 4.5GHz on the p4 to match me LOL
you think 30k is within reach(with win2k of course) I think it just might be but you never know, eshbach had 30k with your cpu clocks but used win2k and good ram timings
Remember his vid card is overclocked quite a bit as well.Quote:
Originally posted by Thunderbird1GHz
you think 30k is within reach(with win2k of course) I think it just might be but you never know, eshbach had 30k with your cpu clocks but used win2k and good ram timings
Anyway, new score:
CPU: 3200+ Clawhammer
Stock Speed of CPU: 2.0GHz
Overclocked speed of CPU: 2.48Ghz
MotherBoard: LanpartyUT NF3-250gb
Ram: HyperX 3000 BH-5
Video Card: X800XT-PE
Stock Core of Video: 520
Actual Core of Video: 550
Stock Mem of Video: 560
Actual Mem of Video: 600
Cooling Used: SLK-948U 80mm Tornado, stock VGA
Your scores with links: 28,930
card clocks only matter in nature. why is your bh5 at 2.5-3-3-10 timings you should be running 2-2-2-10 like mine, I did not gain a single MHz relaxing the timings! tighten your timings and like I said 10 times, install win2k(got another hdd for that if need be) I bet you can get 30k, I know you can, I am rooting for you man! :D
my 30k run was 242x10 on an AN50R (NF3 150) and i had 555/635 card clocks.Quote:
Originally posted by KaoTiK
Remember his vid card is overclocked quite a bit as well.
Anyway, new score:
CPU: 3200+ Clawhammer
Stock Speed of CPU: 2.0GHz
Overclocked speed of CPU: 2.48Ghz
MotherBoard: LanpartyUT NF3-250gb
Ram: HyperX 3000 BH-5
Video Card: X800XT-PE
Stock Core of Video: 520
Actual Core of Video: 550
Stock Mem of Video: 560
Actual Mem of Video: 600
Cooling Used: SLK-948U 80mm Tornado, stock VGA
Your scores with links: 28,930
You asked for it... ;)Quote:
Originally posted by Ryder
Nice score KaoTiK! :)
-looks like i'll be bumped down
a notch very soon too!
CPU: 3200+ Clawhammer
Stock Speed of CPU: 2.0GHz
Overclocked speed of CPU: 2.58Ghz
MotherBoard: LanpartyUT NF3-250gb
Ram: HyperX 3000 BH-5
Video Card: X800XT-PE
Stock Core of Video: 520
Actual Core of Video: 553
Stock Mem of Video: 560
Actual Mem of Video: 600
Cooling Used: SLK-948U 80mm Tornado, stock VGA
Your scores with links: 29,765
I really need some ram that will do 1:1 over 248MHz... That ATi Silencer 4 would be nice as well.
I'll see if I can find my Win2k CD tonight as well.
wow good god almost 30k! with that ram divider, what MHz is it running now? It was my idea to suggest 2-2-2-5 timings, see how much it helped? :D very nice cpu oc too, what volts is that with? hope u find that win2k cd rom, me and eshbach were discussing this and the gains may be 1000!!!!!!!! :eek:
Not sure what the Ram was at, it was on the 180MHz divider so CPU-Z couldn't recognize the frequency, I'm guessing the ram was running around 225-230MHz.Quote:
Originally posted by Thunderbird1GHz
wow good god almost 30k! with that ram divider, what MHz is it running now? It was my idea to suggest 2-2-2-5 timings, see how much it helped? :D very nice cpu oc too, what volts is that with? hope u find that win2k cd rom, me and eshbach were discussing this and the gains may be 1000!!!!!!!! :eek:
I have a few other things to try later on tonight, if I get that Win2k CD expect me to possibly take over second place. ;)
Eshbach get to work, I'm moving up there, lol.
fine, make me break out a 32k score, no problem :)Quote:
Originally posted by KaoTiK
Not sure what the Ram was at, it was on the 180MHz divider so CPU-Z couldn't recognize the frequency, I'm guessing the ram was running around 225-230MHz.
I have a few other things to try later on tonight, if I get that Win2k CD expect me to possibly take over second place. ;)
Eshbach get to work, I'm moving up there, lol.
http://service.futuremark.com/compare?2k1=8158853
i'll post in official form later on with an '03 and an '05 score too
;)
Ok, here's the official update:
CPU: Athlon 64 3200+
Stock Speed of CPU: 2000
Overclocked speed of CPU: 2560
MotherBoard: DFI LANParty UT NF3 250GB
Ram: Mushkin Level II 3500 2-2-2-10
Video Card: ATI Radeon X800XT-PE
Stock Core of Video: 520
Actual Core of Video: 628
Stock Mem of Video: 560
Actual Mem of Video: 654
Cooling Used: SLK948U/92mm Tornado, ATI Silencer 4
Your scores with links:
3DMark 2001: 32015 http://service.futuremark.com/compare?2k1=8158853
3DMark 2003: 14708 http://service.futuremark.com/compare?2k3=3205821
3DMark 2005: 7090 http://service.futuremark.com/compare?3dm05=99045
lol you just wait until I figure out a way to get my ram to run 260 1:1. :) I know my Processor can handle it. Does your X800 have ramsinks? Or does the ATI Silencer cool the ram?Quote:
Originally posted by eshbach
Ok, here's the official update:
CPU: Athlon 64 3200+
Stock Speed of CPU: 2000
Overclocked speed of CPU: 2560
MotherBoard: DFI LANParty UT NF3 250GB
Ram: Mushkin Level II 3500 2-2-2-10
Video Card: ATI Radeon X800XT-PE
Stock Core of Video: 520
Actual Core of Video: 628
Stock Mem of Video: 560
Actual Mem of Video: 654
Cooling Used: SLK948U/92mm Tornado, ATI Silencer 4
Your scores with links:
3DMark 2001: 32015 http://service.futuremark.com/compare?2k1=8158853
3DMark 2003: 14708 http://service.futuremark.com/compare?2k3=3205821
3DMark 2005: 7090 http://service.futuremark.com/compare?3dm05=99045
yes the silencer cools the RAM. RAM is holding me back too dude... i do have RAM that will run 285 1:1 but the ras:cas 3 makes it not worth it :( 3dmark loves ras:cas 2 which means i'm stuck at 2560mhz for now.Quote:
Originally posted by KaoTiK
lol you just wait until I figure out a way to get my ram to run 260 1:1. :) I know my Processor can handle it. Does your X800 have ramsinks? Or does the ATI Silencer cool the ram?
Why dont you just run a divider? Or do you find that takes too much out of the performance? How high will your Claw go 3DMark stable?Quote:
Originally posted by eshbach
yes the silencer cools the RAM. RAM is holding me back too dude... i do have RAM that will run 285 1:1 but the ras:cas 3 makes it not worth it :( 3dmark loves ras:cas 2 which means i'm stuck at 2560mhz for now.
Nice scores eshbach, nice air-cooled clocks on that video card too! Very impressive seeing that you were hitting a 575MHz gpu limit all stock.
Eshbach and KaoTik, you're both updated and off my X'mas list! You guys are making me work too hard!:p :D Very impressive numbers btw, KaoTik, shouldn't you do something about your '03 numbers?
29fsb with relaxed timings should still be a bit better I recon, you did not give it much trying, I say maybe 100-200 marks ahead cause of all the extra bandwith. If you mod the rails in your psu, you can hit 260x10 with a tiny bit more volts :) I need to update my own ti4200 score soon
right, like i'm going to tell you :pQuote:
Originally posted by KaoTiK
Why dont you just run a divider? Or do you find that takes too much out of the performance? How high will your Claw go 3DMark stable?
Thanks, but i haven't even started yet :)Quote:
Nice scores eshbach, nice air-cooled clocks on that video card too! Very impressive seeing that you were hitting a 575MHz gpu limit all stock.
temp is only 38 idle and 50 after nature... i think i might actually be able to catch your card clocks if i push a little more voltage to it :) i dropped my resistance to 370 from 420, but i'm really not sure how many volts i'm running through it...
32k was my goal with the DFI... that's done, now for 33k... so far only 1 person has done it on air and that was with an FX-53... it would be nice to catch him, but i have much tweaking to do if i want 33k and college work to keep me from it :(
I'll get there, sheesh man, I dont have 20 arms and 10 computers! :p :)Quote:
Originally posted by mikeysg
Eshbach and KaoTik, you're both updated and off my X'mas list! You guys are making me work too hard!:p :D Very impressive numbers btw, KaoTik, shouldn't you do something about your '03 numbers?
Oh I see, now that I'm threatening your position you are all secretive, I see how it is. ;) I may have to pick up one of those X800 Silencers tomorrow and see what happens. :DQuote:
Originally posted by eshbach
right, like i'm going to tell you :p
Esh says he doesn't like traitors :oQuote:
Originally posted by KaoTiK
Oh I see, now that I'm threatening your position you are all secretive, I see how it is. ;) I may have to pick up one of those X800 Silencers tomorrow and see what happens. :D
I'm thinking about getting FX-55!
I haven't upgraded for awhile :(
notice how i make all my runs and then only post 1 update for mikey to take care of :)Quote:
Originally posted by KaoTiK
I'll get there, sheesh man, I dont have 20 arms and 10 computers! :p :)
also, i haven't really told anybody how far my claw will go 3d stable ;)
you and me both, actually... i've actually pretty much decided to get one though... :DQuote:
I'm thinking about getting FX-55!
Yeah well I keep thinking I'm done all my runs but then something else happens. ;) There should be another update tonight though...Quote:
Originally posted by eshbach
notice how i make all my runs and then only post 1 update for mikey to take care of :)
also, i haven't really told anybody how far my claw will go 3d stable ;)
Well ****, if all you guys get FX-55 I'm going to have to get one too, and I really don't feel like spending $1400 on a Processor right now! :pQuote:
Originally posted by OpStar
Esh says he doesn't like traitors :o
I'm thinking about getting FX-55!
I haven't upgraded for awhile :(
I wouldnt bother with a fx55, huge waste of money unless your trying to break 40k marks and have plenty of extra $$$$$ for the effort :p and besides give 90nm a chance, fx55 is maxed out at 130nm. Thats an $800+ cpu at that, even more than the $700 x800xt that go on ebay. Id save for amd's next stepping of winchesters, the 3GHz capable ones. Right now amd is just getting started on 90nm so they suck