Sharkyextreme.com 3DMark Team

Yes it was. But what can ya do?

Colossus if you have a sec can you take a look at this thread for me and let me know if you have any input?

http://www.sharkyforums.com/showthre...hreadid=191131

Thanx.;)

Quote:

---

Originally posted by vertices
I have to admit..I'm quite a bit disappointed in Sharkys right now. So much so that I am honestly considering going somewhere else.

If you take a look ay my "request for sticky" thread in the "Ask Sharky" forum, you will see no one even answered my eloquent rebuttle. They simply closed the thread. Is that the way our wonderful mods handle a simple request from a loyal member who promotes the site?

Very 5 year oldish to me. I can't believe the audacity of this place. Not even the decency to reply to me.

I really might leave this place. That is simply unacceptable behavior to me.

They don't want to give a sticky, fine, I am no longer tagging my 3D Mark scores for a site that has no appreciation or future vision.

---

vertices, you've got a PM waitin' for ya. :)

So do you Colossus and OpStar. :)

OHH YEAH BABY!!!!

20729 :)
http://service.futuremark.com/compare?2k1=6506097

HOLY CRAP:eek: :eek: A new #1 may be in the making:D

Awesome score!!

I was shocked!!!!

I was only getting like 202xx and all of a sudden a nice 500 points increase.. :)

I love tweaking :)

Where those tweaks that you used the ones I had linked to in my Ragetweak/3dmark thread?

Well..... No not really... I just tighten my settings and also installed the new 3.4 :)

Damn you're close to me Colossus!!:)

Good Work. Although you got a bit to go to be #1:D

Passed my first 2 tests towards my MCSE, MCSA, MCDBA last night. Tests 210 and 215 (2k Pro and Server) Woo Hoo!! Taking Infrastructure 216 tomorrow night. Wish me luck!!

I'll be busy this week and next, won't be on the boards too much.

You got 2 weeks to bench with nothing from me Colossus. Make the most of it!!!!:):D:)

Got your PM Pyro, We'll talk when I get back. :)

I dont have that much to go only about 350 more points :)

Should be cake :) I should have my P4C800 and IC7 tomorrow :)

Colossus, didn't you state in another thread that the P4C800 has a new bios with a higher vcore range? How high? I might grab that board over the IC7-(G).

Yes the latest BIOS allows 1.90v I believe...

Hey I wouldn't mind being on the site...Once I get a good score that I can publish I will post it here.

Cool!

I just fried the 9800Pro!!!!!

Woohoo!

Your kidding, right?! :eek: u just fried the best card on the market :cool: .. *bows down in great respect* .. thats simply awesome :D .. so what will u do now ?

Quote:

---

Originally posted by Trunks
Hey I wouldn't mind being on the site...Once I get a good score that I can publish I will post it here.

---

Sure thing. Just post a link with detailed computer specs.

Though scores won't be updated for, I'd say a week. I've been making multiple trips back and forth moving all of my stuff to my new house and vertices is busy with work until the beginning of June. Soon soon though. I'll keep you all informed.

Quote:

---

Originally posted by Colossus
Cool!

I just fried the 9800Pro!!!!!

Woohoo!

---

I'm speechless man. :( How'd it happen? R.I.P

I'm assuming another 9800 PRO will arrive on your doorstep tommorow. ;) :p

Actually yeah another one :)

Too bad the 5900U isnt out yet!!!!

I am not exactly sure, I think I ran it to hard and it baked... Even with my box fan cooling it down.. I was determined to beat 7000 in 2k3

She was a good card! I just hope her replacement is perform better :) :D

You should see my POST screen now.. All colorful and its in some kind of funy font.. All bold and stuff... I turned off that comp for now.. I will power back up in like 30 minutes.. Just to make sure!

Damn, sorry to hear that. I think I'll stop pushing mine now.

Pyro, I have been seeing what I could get out of my KT400 and found out it under volts my vcore by .05v, so instead of having 1.85v vcore, I have only 1.8v to play with, added with a max of 2.65v vdimm. I found that I have three settings I can run it at, 14x172=2.4ghz, 10x191=1.91ghz and 13x180=2.34ghz. As far as the ram settings it runs at 52221 at all these settings. So the best 3D mark score I got was at the 13X180, even though I got higher memory bandwith with it at 10x191. So here is the highest score I can get with this MB. http://service.futuremark.com/compare?2k1=6524023

Nice to hear from you lonewolfroger. :) Not a bad score at all. Especially for a 4200. I've got quite afew scores to update. I'll update them tonight after I'm done working out.

I hope I can get it close to 14K, with the 8rda3+ if newegg ever gets them in, It seems like I have been waiting forever for that MB . I am right now going to go ahead and put the cooper heatsinks I got for the 4200 on and take off the HSF and apply AS3 to the core. That should get me over 300 on the core and 600 on memory. Edit for correction.

Hey Pyro, dont update my 3dmark score just yet, because I plan on breaking 19K later on tonight when I get home :).

Quote:

---

Originally posted by lostlilchild6
Hey Pyro, dont update my 3dmark score just yet, because I plan on breaking 19K later on tonight when I get home :).

---

Awesome dude, just post the score here when your done. Doh, now I believe I'm 5th or 6th on the list.

Everyone, I'm currently updating right now.

So far I've added/updated these scores, will update:

Dano OOTA 03
Chuck232 VGA OC
GF4 Ti 4600 Group
GF4 Ti 4400 Group
GF2 Ti 4200 Group
Colossus 01 Top 10/ 9800 PRO class
Colossus 03
lonewolfroger 01 4200 class
vertices 03

I don't even think I'm in the top 10 anymore for 2k1 haha.

18,518


http://service.futuremark.com/compare?2k1=6528477



Will try for more! :)