man i need to unlazy myself and do another benching run
Printable View
man i need to unlazy myself and do another benching run
I hear ya dude, I just realized that my previous best were on my old mobo, the KV8 Pro r1.1. :eek: That means I haven't done any benchmark with my DFI LANParty yet, and I've had this board for quite a while now.....Geez, am I that lazy?!:o :DQuote:
Originally posted by flutie98
man i need to unlazy myself and do another benching run
dfi board without benchies to go with it... man are you on crack?
Wish I were, then I'd have some sorta excuse. :p I'm just plain lazy....no more, no less.:o :DQuote:
Originally posted by rabidmoose171
dfi board without benchies to go with it... man are you on crack?
Just bought a 6200 AGP to put in my backup system
and got REAL close to 20K in 01'
http://service.futuremark.com/compare?2k1=8500051
-saw a thread at XS and just had to try it,overclocks like a banshee :)
This is a good "T-Bird" type of card ;)
Speaking of that... anyone wanna donate me 40bucks so i can get a ti4200 and put it under dry ice?
dude i already bought 2 of them to do that during the summer :DQuote:
Originally posted by rabidmoose171
Speaking of that... anyone wanna donate me 40bucks so i can get a ti4200 and put it under dry ice?
i think im gonna buy some Dice cpu mount over at XS so well have a "cool" summer :D
woot
if we put my winchester under your water, or di if we can 2.9 should be a possiblity, at least 2.8
with a strong ti4200 were gonna rape the orb.
Quote:
Originally posted by rabidmoose171
woot
if we put my winchester under your water, or di if we can 2.9 should be a possiblity, at least 2.8
with a strong ti4200 were gonna rape the orb.
we might have to get a 3500 claw, or newcastle or somthin that likes sub zero, so far the venice doesnt like much below -40,
and blaw cuase of summer classes i wont be shipping my rig over for the summer, so cant use my water setup :(
screw that, ill hold onto ;your cpomputer for you while your gone...
19999 marks with a 6200? what???????? are you kidding? dude I would never live that down! do some more runs and try those 76.60 drivers or whatever the latest is. also yours looks to be the 8 pipe verson as well since your slightly beating my 9500(the 128 bit verson) with less cpu power too.
as for ti4200, good luck beating my ti4200. I am gonna smash 20k with that once I go venice, all on air too :D
I plan to do some more runs on monday with the 76.41 drivers, i tried rerunning nature with a slighly higher core and it froze :(Quote:
Originally posted by Thunderbird1GHz
19999 marks with a 6200? what???????? are you kidding? dude I would never live that down! do some more runs and try those 76.60 drivers or whatever the latest is. also yours looks to be the 8 pipe verson as well since your slightly beating my 9500(the 128 bit verson) with less cpu power too.
as for ti4200, good luck beating my ti4200. I am gonna smash 20k with that once I go venice, all on air too :D
Was able to break 3k in 05' and 7K in 03' :)
I'm looking into a better fan/heatsink for that little card.
Yes the other 4 pipes are unlocked.
yea, well whatever... we will beat it, if we unlazy ourselves.Quote:
Originally posted by Thunderbird1GHz
19999 marks with a 6200? what???????? are you kidding? dude I would never live that down! do some more runs and try those 76.60 drivers or whatever the latest is. also yours looks to be the 8 pipe verson as well since your slightly beating my 9500(the 128 bit verson) with less cpu power too.
as for ti4200, good luck beating my ti4200. I am gonna smash 20k with that once I go venice, all on air too :D
MY new VL-Bus Cirrus Logic 1MB board will pawn all your AGP/PCIe cards with 128MB or 256MB!
WOOT!
Bring your %&^@#*@%X?$& setup on!! You gonna' get smoked with myQuote:
Originally posted by Colossus
MY new VL-Bus Cirrus Logic 1MB board will pawn all your AGP/PCIe cards with 128MB or 256MB!
WOOT!
Atari 2600 Ultra Xtreme Edition from Michaels PC!!
Err....a modest lil update from me for my '05 benchy. The latest build doesn't seem to like OC much:( , or perhaps the offical FW66.93 isn't great for OC....I keep getting freezes and 'Window has lost focus' crap.:mad: Hope you guys don't mind....I think I'll excuse myself from filling in the detail in standard form, it's past 1 in the morning and I'm gonna hit the sack :
CPU - 2368mhz
GPU - 450/1144
3DMark'05 score - 5404
http://service.futuremark.com/compare?3dm05=728321
Have you tried the 76.41 drivers Mikey?
Nope, I've heard mixed reviews of it....seems the temp bug is there for some. I didn't wanna deal with that. Anyway Ryder, how the hell does one pump up the vcore with the DFI board. I couldn't find it in the bios.....where the heck is it? My CPU ran stably enough @215x11=2365mhz, but if I wanna go higher, I'd need to pump up my vcore, vdimm's not a problem as my bios allows it up to 4v. :eek:Quote:
Originally posted by Ryder
Have you tried the 76.41 drivers Mikey?
The temp bug disappeared for ME,but in your bios go to "Genie bios setting" -look above chipset voltage control and you will see "Cpu Vid control" and below that "Vid special control" so you can bump up and fine tune your vcore settings. A calculator is what i use to check the vcore setting before i reboot.Quote:
Originally posted by mikeysg
Nope, I've heard mixed reviews of it....seems the temp bug is there for some. I didn't wanna deal with that. Anyway Ryder, how the hell does one pump up the vcore with the DFI board. I couldn't find it in the bios.....where the heck is it? My CPU ran stably enough @215x11=2365mhz, but if I wanna go higher, I'd need to pump up my vcore, vdimm's not a problem as my bios allows it up to 4v. :eek:
http://www.anandtech.com/mb/showdoc.aspx?i=2198&p=4
guess who just got his hands on some liquid nitrogen ;)
That should make for a fun weekend. :)Quote:
Originally posted by eshbach
guess who just got his hands on some liquid nitrogen ;)
Uhhh, talk about better late than never - is this all I need? Geez, I can be #1 in the hugely populated 6800nu category.....;)
Benchmark: 3DMark 2001
CPU: A64 3000+ Newcastle (250x10@166)
Stock speed: 2.0G
O/C'd Speed: 2.5G
Motherboard: Chaintech VNF3-250
Ram: 2x512 Mushkin Blue PC3200@2-2-2-5
Vid Card: PNY6800nu
Stock Core: 325
Actual Core: 350
Stock Mem: 700
Actual mem: 750
Cooling: XP-120/Enermax 90mm.
My score(s): 3DMark01: 22565
Link: http://service.futuremark.com/compare?2k1=8510684
I am puzzled why you are more than 1k below my 2GHz score despite your 500MHz cpu lead on me, I got u in all but drag low :confused: definately should be scoring way higher! Have you used the multi apic for one? For two, you need lots of ram bandwith, your async and single channel absolutely kills u there :(
Tbird - Look, thanks for the input, but I don't care all that much about my absolute score. I just want to get listed. Plus, AFAIK single channel costs what, a big 5% or so? And async doesn't mean a whole lot for A64 xcept maybe for Sandra, stuff like that. For example, If I run 2.5G I get a 36 sec. SuperPi whether I run sync or async.Quote:
Originally posted by Thunderbird1GHz
I am puzzled why you are more than 1k below my 2GHz score despite your 500MHz cpu lead on me, I got u in all but drag low :confused: definately should be scoring way higher! Have you used the multi apic for one? For two, you need lots of ram bandwith, your async and single channel absolutely kills u there :(
im on your side, but something must be wrong, i get 33 at 2.5g 1:1... your ram timings suck?Quote:
Originally posted by hwmicre
Tbird - Look, thanks for the input, but I don't care all that much about my absolute score. I just want to get listed. Plus, AFAIK single channel costs what, a big 5% or so? And async doesn't mean a whole lot for A64 xcept maybe for Sandra, stuff like that. For example, If I run 2.5G I get a 36 sec. SuperPi whether I run sync or async.