Printable View
You should be much better then that!!!!Quote:
Originally posted by slavik
timings are 2.5-2-2-11, anything "better" gets errors in memtest86 3.0 test #5
MY Corsair PC3500C2 can do much better then that...
Try lowering to 2-2-2-5 or 2-2-3-5 (play around) with some added vdimm.. Like 2.7/2.8v... And add some vAGP.. That can added voltage to your chipset and stabilize your overclock...
But 2.5 is pretty bad when you are below rated speeds...
vdimm is 2.9
going to do during the day, and add a 120mm fan :)
maybe that 80mm EHE delta should be put to use, too ;)
Vdd is 1.8, shall I try 2.0 :eek: ?
Quote:
Originally posted by Colossus
You should be much better then that!!!!
MY Corsair PC3500C2 can do much better then that...
Try lowering to 2-2-2-5 or 2-2-3-5 (play around) with some added vdimm.. Like 2.7/2.8v... And add some vAGP.. That can added voltage to your chipset and stabilize your overclock...
But 2.5 is pretty bad when you are below rated speeds...
OK, I got nothing for left for them. With the heat here today, I can barely get what I had back in November. Enjoy guys, the FX is formating a SATA stripe set as we speak. Next stop is as a SBS/Office demonstrator. Time to make a few bucks for the next project.
come on, we can't let an intel chip beat us! if you're going to just give up, at least send me your XT...Quote:
Originally posted by Thermo
OK, I got nothing for left for them. With the heat here today, I can barely get what I had back in November. Enjoy guys, the FX is formating a SATA stripe set as we speak. Next stop is as a SBS/Office demonstrator. Time to make a few bucks for the next project.
if only I wasn't limited by my mobo/cpu ...
how high can you clock your video card?Quote:
Originally posted by slavik
if only I wasn't limited by my mobo/cpu ...
a) You forget, I am an Intel guy :eek:Quote:
Originally posted by eshbach
come on, we can't let an intel chip beat us! if you're going to just give up, at least send me your XT...
b) This aint really my bag. I'm sure some of you guys could take this system an make a few waves with it. I just get lucky with new hardware now and again.
Indeed, I wagered that I could get 27k with your cpu/mobo/video. :DQuote:
Originally posted by Thermo
a) You forget, I am an Intel guy :eek:
b) This aint really my bag. I'm sure some of you guys could take this system an make a few waves with it. I just get lucky with new hardware now and again.
It can be yours ;)
Bah, for $1000 (CPU) + $300 (mobo) + $200 (memory) + $600 (video), $2100; you can keep your high scores. :PQuote:
Originally posted by Thermo
It can be yours ;)
I can do a little better, $1890 and it's yours
Excuse me while I laugh my *** off. :D :PQuote:
Originally posted by Thermo
I can do a little better, $1890 and it's yours
well bad news, i tried the vdimm mod and...
the clips were too big. i got the smallest ones i could get at radio shack, so i guess my next stop is the local electronic specialty shop. hopefully i can find some that will fit. unfortunantly they're not open on sundays, so perhaps i'll mod the radeon tomorrow... we shall see.
450/385, after that, I get artifacts ... got the ZM80C-HP with teh fan on it ... maybe a bad install?Quote:
Originally posted by eshbach
how high can you clock your video card?
my mobo+RAM won't push ...
I top out at about 210-220MHz with 2-2-2-11, 2.5-2-2-11 let's go a bit higher ...
my RAM (switched to corsair winbond bh5 with heatspreader) gets freaking hot (by the touch I'd say 60C), I got a couple of fans, but no way to attach them to cool the ram :(
vdimm? for the RAM or your vid card, if it's the vid card gimmie a link to a guide to do it :) I am considering it on my :eek: 9800XT :eek:
Quote:
Originally posted by eshbach
well bad news, i tried the vdimm mod and...
the clips were too big. i got the smallest ones i could get at radio shack, so i guess my next stop is the local electronic specialty shop. hopefully i can find some that will fit. unfortunantly they're not open on sundays, so perhaps i'll mod the radeon tomorrow... we shall see.