if they didn't make any noise, I'd make a case of out them ;)
Quote:
Printable View
if they didn't make any noise, I'd make a case of out them ;)
Quote:
I agree, one on each side :)Quote:
Originally posted by slavik
if they didn't make any noise, I'd make a case of out them ;)
slavik, your soo close to 20k, i remember in the summer when i was trying to break 20k, oh man that was the hardest thing ever, now i wanna beat 22k, if i had a 875p motherboard, i would break it easy, very easy, because i broke 20k with my IC7-G with 100mhz slower computer, less tweaks, loosing ram timings then i did with my 865p.. but i sold that system. :(
so anyone with any tips with me breaking 22k?
well...it's about time for some benching. well...not quite right now...but when i get back to my dorm room. right now i'm trying to make a list (checklist) of what i need to do. i'm going to be installing win2k. i should go with dx8.1 correct? what else do i need?
You will have to test several drivers and see which ones are best for 3D Marking on your system(check out the 44.03, 40.72 and the 43.45`s) and do a lot of tweaking with Rivatuner.:)Quote:
Originally posted by schultz
well...it's about time for some benching. well...not quite right now...but when i get back to my dorm room. right now i'm trying to make a list (checklist) of what i need to do. i'm going to be installing win2k. i should go with dx8.1 correct? what else do i need?
Lots of tweaking on rivatuner??? Like what, I tried to do that and I don't even know what the hell those commands do :p
Click on the link to Pyro`s 3D Mark Guide in schultz`s sig, there should be some information there. I need to put that link back in my sig.:)Quote:
Originally posted by icecube_of_death
Lots of tweaking on rivatuner??? Like what, I tried to do that and I don't even know what the hell those commands do :p
yes you do! :)Quote:
Originally posted by lonewolfroger
Click on the link to Pyro`s 3D Mark Guide in schultz`s sig, there should be some information there. I need to put that link back in my sig.:)
okay...i already have rivatuner (check!)
now what drivers do i have? lots i think. guess i will have to check that out when i get back...
thanks for the input so far! :)
19750 is all this system can do, unless you have ways of running the ram at 2-2-2-11 @ 210MHz FSB (CAS is 2.5 right now)
EDIT: 2.9 Vdimm
Try testing the highest FSB possible for 2-2-2-11, you might get more performance out of it like that. Raise the multiplier to increase the overall CPU speed when you find that FSB
it's 200-205 ...
I will try to find the RAM's highest point at 2-2-2-11 by running async, then try the highest FSB by running async ;)
Quote:
Originally posted by icecube_of_death
Try testing the highest FSB possible for 2-2-2-11, you might get more performance out of it like that. Raise the multiplier to increase the overall CPU speed when you find that FSB
If you need to run cas2.5 for 210FSB and you can run cas2 at 205, I would definitely turn down the FSB and bump the multiplier instead. The switch from cas 2.5 to cas 2 is definitely worth that 5MHz
You're updated sharkypinoy! ;) You've changed your mobo and flashed your gfx card to 'Pro' :eek: Very nice work there dude.:DQuote:
Originally posted by sharkypinoy
CPU: Intel Pentium 4 2.8C
Stock Speed of CPU: 2.8C
Overclocked speed of CPU: 3658mhz
MotherBoard: Abit IS7-S
Ram: OCZ PC3200 Plantium Edtion (2-3-2-5)
Video Card: 9800 non-pro (flashed to pro)
Stock Core of Video: 380
Actual Core of Video: 470
Stock Mem of Video: 340
Actual Mem of Video: 390
Cooling Used: Silverprop cyclone evolution, dangerden vid waterblock
Your scores with links: 21573
http://service.futuremark.com/compare?2k1=7390870
DAMNIT need to break 22k, i used drivers cat3.2, can anyone help me break the 22k mark?
just tried 2-2-2-11 @ 200 ... no go, errors in memtest86 ... maybe I should set Vdd to 2.0?
Quote:
Originally posted by icecube_of_death
If you need to run cas2.5 for 210FSB and you can run cas2 at 205, I would definitely turn down the FSB and bump the multiplier instead. The switch from cas 2.5 to cas 2 is definitely worth that 5MHz
Are you trying to aim for a 3DMark stable score or a completely stable score??? Because if you do it for 3DMark, you don't need 100% stability ;)