No problem, not to mention that it also can fit many other sizes of fans. :)Quote:
Originally posted by Wurm
Thanks Mark!
Printable View
No problem, not to mention that it also can fit many other sizes of fans. :)Quote:
Originally posted by Wurm
Thanks Mark!
I like the double fan holder. That would be a good mod in general with out the radiator. I wonder if they make those for 80mm fans.Quote:
Just the grill alone would look sharp in the front of the Lian-Li's.:eek:
So you have the lower fans as exhaust? That would be making the air flow against the natural flow of heat (up)Quote:
Originally posted by Wurm
47cfm I have two in the front sucking and two in the back blowing.
At the moment Digidoc says the my case temp is 26°c my HDDs 28c° and my CPU 47°c
This fall (saving the money up bit by bit that my wife doesn't spaz on me....again :p ) I am planning on getting a
http://217.172.178.216/prodimg/casediagonal.jpg http://217.172.178.216/prodimg/apinternanschluesse.jpg
(just the radiator kit) and hooking up some kickass watercooling. When that happens I'm going to finally do the window mod and finish the rest of my case as well.
:confused: :confused: ?
HUH?Quote:
Originally posted by pudad
So you have the lower fans as exhaust? That would be making the air flow against the natural flow of heat (up)
:confused: :confused: ?
The two front lower fans are pulling in (sucking) and the back upper fans are pushing out (blowing)
How did you get that confused :p
Oh ok, dude, how did I get that confused? lolQuote:
Originally posted by Wurm
HUH?
The two front lower fans are pulling in (sucking) and the back upper fans are pushing out (blowing)
How did you get that confused :p
I have been so busy with just hanging out since I got back to school. Here are some pics of my new desk in my new apartment. It's really messy, but I am a neat freak and will have it clean pretty soon.
http://www.freewebs.com/enigma1406/pics/Desk1.jpg
http://www.freewebs.com/enigma1406/pics/Desk2.jpg
edit: drag and drop the links to the address bar in internet explorer OR copy and paste.
92mm Tornado that I just got done cutting.
I didn't have time to put the finishing touches on it, so it's not perfect, and I got a few scratches that you can see, all though I used some car-wax to get a good deal of it out.
Here's the pic:
http://pics.bbzzdd.com/users/Crawlin...2mmTornado.jpg
:)
Rob, very nice desk setup; gotta love corner units eh? ;)
My Wife Love's her Corner Unit. Big Blue barely fit under it. I had to remove the keyboard tray. Its not the most steadiest but it doesn't take up much space either. I have my Lian in the other corner with a huge unit.Quote:
Originally posted by mystifmagic
Rob, very nice desk setup; gotta love corner units eh? ;)
https://www.sharkyforums.com/ :cool:
Rob, I hope in the winter time you don't have your case down there with that heater. Have to swap sides or find another corner huh..
I have a thing for all my equipment being stacked in front of me ;)Quote:
Originally posted by TAZTG
My Wife Love's her Corner Unit. Big Blue barely fit under it. I had to remove the keyboard tray. Its not the most steadiest but it doesn't take up much space either. I have my Lian in the other corner with a huge unit.
http://mywebpages.comcast.net/taztg/PICS/Dcp_1506.jpg :cool:
Rob, I hope in the winter time you don't have your case down there with that heater. Have to swap sides or find another corner huh..
Heh, well here's my cely rig, its the only rig that my webcam will work on, dont ask why, i have no idea, and i am too lazy to figure out why. Sorrie bout the pic quality, but its the best i can come up with.
Mobo
Note the cookie system blower, and the taped speed change for the Vulcano lol, and then notice the PINK DC fan... also variable speed. Yeah its messy, but it was tickin for 2.5 years now, except da mobo...
Box
A cheap umpex case, ya well...
Funnie
This be some error that popped on my computer a while ago, there is a simple explanation, but try your best to guess how it happened :D
BTW, those are Angelfire links, so copy paste or drag 'em to see...
I like your computer, but it is hard to tell what im lookin at. get a real camera, or borrow someonesQuote:
Originally posted by Shadowfire
Heh, well here's my cely rig, its the only rig that my webcam will work on, dont ask why, i have no idea, and i am too lazy to figure out why. Sorrie bout the pic quality, but its the best i can come up with.
Mobo
Note the cookie system blower, and the taped speed change for the Vulcano lol, and then notice the PINK DC fan... also variable speed. Yeah its messy, but it was tickin for 2.5 years now, except da mobo...
Box
A cheap umpex case, ya well...
Funnie
This be some error that popped on my computer a while ago, there is a simple explanation, but try your best to guess how it happened :D
BTW, those are Angelfire links, so copy paste or drag 'em to see...
Hey Mystif, where did you get that incredible skin for XP? I want it. Also the thing that shows cpu, ram, swap, and time.
I dunno about that skin for XP, but the thing that shows "stats" is CoolMon.Quote:
Originally posted by pudad
Hey Mystif, where did you get that incredible skin for XP? I want it. Also the thing that shows cpu, ram, swap, and time.
Thanks...and yes I do love corner units. Everything is within reach, so I can maximize laziness (:rolleyes: :))Quote:
Originally posted by mystifmagic
Rob, very nice desk setup; gotta love corner units eh? ;)
Yea that's what I'm going to do. The PC-70 is so big, that when I put it under my desk it sticks out too far! When I actually start using the heater (it gets so cold up here) I will definitely move it.Quote:
Originally posted by TAZTG
Rob, I hope in the winter time you don't have your case down there with that heater. Have to swap sides or find another corner huh..
CurrentQuote:
Originally posted by pudad
Hey Mystif, where did you get that incredible skin for XP? I want it. Also the thing that shows cpu, ram, swap, and time.
Be more specific, what skin are you talking about? Quik has it right, I use coolmon (I just customized it to my liking). ;)
Yeah, I got coolmon. It is pretty good. I made it so it show time, temps, and some other stuff:Quote:
Originally posted by mystifmagic
Current
Be more specific, what skin are you talking about? Quik has it right, I use coolmon (I just customized it to my liking). ;)
http://neorevolutionary.tripod.com/desktop.jpg
Oh yeah, I just got a decent pic of my case side, where you can actually see it. :eek:
Anyway, I wouldn't post it, but it's a small picture, so it shouldn't be bad for 56ker's. :)
http://pics.bbzzdd.com/users/Crawlin...2mmTornado.jpg
My problem is, I don't know if the window will fit in with it... =\
hi pudad
what's the specification on your sun monitor?
pudad
where can i download coolmon?
Right here :DQuote:
Originally posted by MSDOS622
pudad
where can i download coolmon?
Hmm, 1600x1200, 22", flat, I run it at 1240x1024 w/ 100Hz ref rate. Anyways, I'll have to let my dad have it for cad stuff, and I'll take him 17" sony flat screen to college.Quote:
Originally posted by MSDOS622
hi pudad
what's the specification on your sun monitor?
http://www.geocities.com/joesholeint...omputers.html?
Also a little late but here goes all the specs are on the site and even though the second comp with window looks messy directly off asus probe cpu after playing gta3 is at 44 C and the mobo is at 27 C with a Dr thermal ti s86. The large desk was built by me and my dad and is very roomie i love it a place for every thing. Things you cant see are my zip drive 2 external hdds and my scanner along with my second monnitor zip is some where by sub and hdds hiding behind cup on second shelf. No case mods for my baby the first one because the case is just to cool without any and i need a processor and vid card in it. Will get window when 9700 and barton come out should make it so i can afford 2000+ and 8500 hehe.