Hey lone, sorry to hear about the postponement of your comp upgrade, that sux!:( I take it the money's going into repairs? Hope it turns out well for you.;)
Printable View
Hey lone, sorry to hear about the postponement of your comp upgrade, that sux!:( I take it the money's going into repairs? Hope it turns out well for you.;)
Can`t repair it no part to replace it with so new car in the works. O`well if there is any bad luck around i get it. :( This will just postpone new computer for a little while, then i will be 3D Marking again.:)
Guess it's about time I got in on this!
3dMark2001
I'll keep going when it cools off in here; I can do better I think. I put pyro's link in sig, here are the specs for this run:
cpu: amd xp mobile 2400+ @ 225 x 10.5
stock speed = 1800 MHz
mobo: dfi lanparty ultraB
ram: 512 pc-3500 mushkin bh-5
video: ATI 9800 nonpro @ 425/361
stock = 325/290
OS: Win2K
Cooling: cpu: slk-800a, tt smartfan2
gpu: vga silencer
I'll do '03 later, for now nice to break 20K.
Hey lone, hope your luck improves, besides, the delay may turn out to be a good thing as you can wait for S939 to really take off - and all its bugs worked out already.;)
r'aggro, I've fixed the link to your score here:
http://service.futuremark.com/compare?2k1=8050488
Feels good to crack 20k, eh? Will insert your score asap.
Edit : Done! I've inserted your score into the team DB.....welcome aboard!:D Could you post your specs in the proper format, and include your stock cpu speed (I had to guess)....check it out and let me know if anything's amiss.:)
Fixed, and tyvm! I'll keep em coming-- my gpu hasn't hit the wall quite yet and I'm sure I can squeeze more Hz out of that proc.
Thanx again!:)
r'aggro you have all the right stuff to get an insane fsb, so use it!
It requires a ThermalRight XP-120 HS for K8 and a 120mm 103 CFM fan to cool the beast! It's vidcard spits out FPS like there's no tomorrow. It uses the nForce3-250Gb chipset! An assault on the 3DMark Team summit is intended!
Check out this monster HS:
https://www.sharkyforums.com/images/...2005/12/55.jpg
Ahhh....the XP120!:eek: I wanted to get it, but it may have a compatibility problem with my Abit KV8 Pro r1.1 mobo....at least, that's what a rep over at Thermalright has informed me. here's the msg for those who have the same board as me :
KV8 Pro with the coil on the PWM area is right next to our K8 adaptive RM. Which mean the stainless steel RM clips are about 1mm from damage the paint onthe coil during installation. My former colleagues from ABIT RD Division, HW Verification Lab tested the mechanical on their motherboards and decided the possible risk of end-users damage their motherboard is too high. MSI seems to be a better layout motherboard in this scenario.
Damn! And I so wanted it!:mad:
hating to rain on your parade OS, but...Quote:
Originally posted by OS-Wiz
It requires a ThermalRight XP-120 HS for K8 and a 120mm 103 CFM fan to cool the beast! It's vidcard spits out FPS like there's no tomorrow. It uses the nForce3-250Gb chipset! An assault on the 3DMark Team summit is intended!
Check out this monster HS:
https://www.sharkyforums.com/images/...2005/12/55.jpg
i've got a preorder for the DFI board...
i've got RAM that does 271mhz 2-2-2
but good luck, the competition will be great :) BTW, what board is that? Epox? using a 3700 Clawhammer?
Not the Epox ;)
Black PCB...hrm MSI 754 board?
Esch -- where do you have a preorder for the DFI?
ah, the MSI, forgot about that one.
contact [email protected] for preorder information.
There's only about 1/2" between it and the back of the vidcard which has me somewhat worried when I add a third-party cooler to the card. We'll see. It slightly overhangs the IDE2 port and memory DIMM1, but no problem mounting stuff in either.Quote:
Originally posted by mikeysg
Ahhh....the XP120!:eek: I wanted to get it, but it may have a compatibility problem with my Abit KV8 Pro r1.1 mobo....at least, that's what a rep over at Thermalright has informed me. here's the msg for those who have the same board as me :
KV8 Pro with the coil on the PWM area is right next to our K8 adaptive RM. Which mean the stainless steel RM clips are about 1mm from damage the paint onthe coil during installation. My former colleagues from ABIT RD Division, HW Verification Lab tested the mechanical on their motherboards and decided the possible risk of end-users damage their motherboard is too high. MSI seems to be a better layout motherboard in this scenario.
Damn! And I so wanted it!:mad:
Got tired of waiting for the DFI mobo and was a tad worried about their being a bit finicky. I hope your's is rock solid stable! I'm going to try the OCZ PC3700EB first and see how it does. If it doesn't do well I'm thinking of trying the new Crucial Ballistix (always trusted Micron/Crucial, glad they're back in the game). Hmmm 2-2-2 @ 271mhz, must be the Mushkin you picked up awhile back???? Yup, 3700+ Clawhammer. MSI K8N Neo Platinum nForce3-250Gb which gave a little grief until I downloaded and installed the latest BIOS flash and drivers, otherwise smooth install. Will install a eVGA 6800 Ultra later today and get start some preliminary benching.Quote:
Originally posted by eshbach
hating to rain on your parade OS, but...
i've got a preorder for the DFI board...
i've got RAM that does 271mhz 2-2-2
but good luck, the competition will be great :) BTW, what board is that? Epox? using a 3700 Clawhammer?
ah, a 6800... you should be able to make a run at '03, but i don't know about '01...
Mmm, nice...Might have to jump in on preordering as well, too bad my chip ain't the best, something like 2.4 on 1.7v :\ Just waiting on my vid card to get back in, watercooling is all set up and whatnot for it ;)
Whats the vcore on the DFI? 1.85?