no GPU is stock its a typo
W/Cing: White water block, caprie heatercore 2x120mm fans
Printable View
no GPU is stock its a typo
W/Cing: White water block, caprie heatercore 2x120mm fans
Looks like with 3Dmark 05' coming out Mikey is going to
be VERY busy :p
Ah hah! You forgot that Vert has to do up an entire new '05 section, he's gonna have to work harder than me......updating's a breeze compared to that. ;)Quote:
Originally posted by Ryder
Looks like with 3Dmark 05' coming out Mikey is going to
be VERY busy :p
http://service.futuremark.com/compare?2k3=3172067
yay 518/780 stable due to my lovely blower fan:)
cpu was at
11x217
ram at 217 2.5-4-4-11
vid was 518/780
cooler on vid was zalman heatpipe and coolermaster blower
cpu heatsink is modded aero 7 lite cooler. baord is albatron kx18d pro NF2.
hopefully ill be able to do 530/780 stable with my new thermal paste which is comin soon since i have baerly none on the hs as it is. then ima get some ramsinks, hopefully 800 is possible on ram
Updated! ;) Rock on dude!:DQuote:
Originally posted by sabrewolf732
http://service.futuremark.com/compare?2k3=3172067
yay 518/780 stable due to my lovely blower fan:)
cpu was at
11x217
ram at 217 2.5-4-4-11
vid was 518/780
cooler on vid was zalman heatpipe and coolermaster blower
cpu heatsink is modded aero 7 lite cooler. baord is albatron kx18d pro NF2.
hopefully ill be able to do 530/780 stable with my new thermal paste which is comin soon since i have baerly none on the hs as it is. then ima get some ramsinks, hopefully 800 is possible on ram
i think ima need to volt mod to be #1 as the #1 5900xt person mem clocks are 902, and his core was 505. He got 6600. Im pretty sure if I volt mod though that ill break 7k
what exactly is volt modding if you don't mind me asking a noob question? im new to the whole "hardcore" OCing club
Physical modifications (mostly require soldering) that allows more power to be supplied into the components that need more voltage.
where can i find a guide to do this...does it require alot of skill or materials? or is it relatively cheap and simple as long as you can follow directions...im guessing this is used when BIOS doesn't support a high enough voltage for OCing?
http://www.vr-zone.com/?i=852&s=1
for example...in the pictures at this link, i don't understand how to connect resistors...i have some lying around from a CPEG class i am taking and was wondering if i could connect them to where i am told in this page, solder perhaps..but can i take them off after i solder? i hear somethign about using a pencil but how do you messure how much resistance i have.
Also, if i do it..does the voltage automatically apply itself, even if the BIOS says otherwise?
also, how do i find the ground with the volt meter adn then how do i find the resistance...
im assuming this is what i need to do since when i overclock my card the system always freezes when i push it too high and i rarely get artifacts...but i am getting a new heatsink for much better cooling..so im guessing it just isnt'e getting enough volts...thanks for the help guys
http://service.futuremark.com/compare?2k1=8144716
CPU: =AMD Athlon 64 3200+
Stock Speed of CPU: =200x11 = 2.2GHz
Overclocked speed of CPU: =229x11= 2.52 GHz
MotherBoard: ASUS K8N-E Deluxe
Ram: 2 x 512 Mb Cosair PC 3200 XMS 3-3-3-6
Video Card: X800 PRO
Stock Core of Video: =475MHz
Actual Core of Video: =540MHz
Stock Mem of Video: =450MHz
Actual Mem of Video: =571MHz
Cooling Used: CPU: CM Hyper6 GFX: Stock
I should be getting a cooler for the gfx card today so i hope to move my score up a few points, esp after i flash to X800 XT.
http://service.futuremark.com/compare?2k1=8145248
CPU: =AMD Athlon 64 3200+
Stock Speed of CPU: =200x11 = 2.2GHz
Overclocked speed of CPU: =229x11= 2.54 GHz
MotherBoard: ASUS K8N-E Deluxe
Ram: 2 x 512 Mb Cosair PC 3200 XMS 2.5-3-3-6
Video Card: X800 PRO
Stock Core of Video: =475MHz
Actual Core of Video: =543MHz
Stock Mem of Video: =450MHz
Actual Mem of Video: =573MHz
Cooling Used: CPU: CM Hyper6 GFX: Stock
Post this one instead of the other one..just did this one..thanks
Anyone around lol? Must be a busy day for everyone haha. If someone could answer my long question from before..you guys know your genius is just dying to be let out!
Gotcha! ;) Nice lil jump in score! Bench on dude!:DQuote:
Originally posted by flyersguy85
http://service.futuremark.com/compare?2k1=8145248
CPU: =AMD Athlon 64 3200+
Stock Speed of CPU: =200x11 = 2.2GHz
Overclocked speed of CPU: =229x11= 2.54 GHz
MotherBoard: ASUS K8N-E Deluxe
Ram: 2 x 512 Mb Cosair PC 3200 XMS 2.5-3-3-6
Video Card: X800 PRO
Stock Core of Video: =475MHz
Actual Core of Video: =543MHz
Stock Mem of Video: =450MHz
Actual Mem of Video: =573MHz
Cooling Used: CPU: CM Hyper6 GFX: Stock
Post this one instead of the other one..just did this one..thanks
Edit : Sorry, I can't help you with such questions as I don't do modding, especially hardmods, as I'm risk averse.:o Try PMing eshbach or mikead_99, these guys are the gurus here.;)
him I just read a whole xbit performance guide on 5900xt. 5900xt standard v is 1.4 and 5950 is 1.6. The hit a max of 495 with 1.4 but when they raised to 1.6 they hit 545! They hit like 600 with 1.85. Also I should have a new 3dmark01 score up soon ^_^