Printable View
So the guys how payed $3 less than me must be happier with theirs than I am with mine, and twice as happy as you are with yours :pQuote:
Originally posted by sapasion
Yeah you paid $3 less than me so you should be happier with your 1.95 than I am with mine :p
Not to rain on the parade but set your expectations accordingly. mystif and I are running 1.95Ghz but I cannot think of another SF member with a XP1600+ over 1.9Ghz. Most people are landing in the very respectable 1.75-1.85Ghz range. I'm sure you'll push as high as you possibily can just don't be too disappointed if your cpu doesn't crack 1.9GhzQuote:
Originally posted by LAG
So now, mistic and saps have both reached the 1.95ghz mark! Man, I really need some better ram and see if I can't hit it too. After seeing you 2, I'm almost sure I can.
hmmm,that gets me the thinking. lets see how it goes.Quote:
Originally posted by sapasion
Well aside from buying a new PSU which would run you maybe $75-80 for a real top end model. A Palomino running 1.75Ghz has a comparable power draw to a Tbird of 1.4, although if my numbers are right it is slightly, slightly higher. IMO the Palomino's do run lighter on the 5v rail. With the same PSU here's what I got [email protected] 4.95v. [email protected] 4.98v. At $52 you might want to pull the trigger anyway. Even if you only run at say 1.6Ghz you're still getting all the bells and whistles of the AXP
Just curious, at 1.9, what is that in AMD XP _____+ language?
man im going to do a 1600+ overclock too. hope i get near the 1.9 mark.
XP 2400+ ;)Quote:
Originally posted by DI9ITAL
Just curious, at 1.9, what is that in AMD XP _____+ language?
man im going to do a 1600+ overclock too. hope i get near the 1.9 mark.
I guess it'd be around a 2300+ but that's not what the BIOS calls it. It actually gives the straight Mhz for me. But for mystif they call his an XP2400+. He must have a newer BIOS than me
The BIOS must be reading it incorrectly then. Xp2400+is suppose to be at like 2ghz. I think xp2300+ is much more correct ;).Quote:
Originally posted by sapasion
I guess it'd be around a 2300+ but that's not what the BIOS calls it. It actually gives the straight Mhz for me. But for mystif they call his an XP2400+. He must have a newer BIOS than me
I may not hit 1.9, but it sure is fun to try isn't it :) Hey mys, what mobo are you using?
http://home.houston.rr.com/mystifmagic/systems.htmQuote:
Originally posted by LAG
Hey mys, what mobo are you using?
;)
Anymore 3DMarks yet buddy? ;)Quote:
Saps, I can't find the exact post but I remember you saying your load temps w/ 1.95 Vcore were about 133 F (56 C) right? I'm trying to gauge how effective my cooling is right now and was wondering what your average case temps are? My room gets pretty hot in the summer so my case temps are about 32 C and my [email protected] 1.775 Vcore idles around 43 C and loads in the high 40's. This is with a SLK-800 and Vantec Tornado.
Sorry it will have to wait until tomorrow, I have had work up to my eyeballs. https://www.sharkyforums.com/Quote:
Originally posted by KJY9
Anymore 3DMarks yet buddy? ;)
UGH and here I've been benching for the past 2 hours straight lol...be back in a few with my final benches with this proc and mobo ;)Quote:
Originally posted by mystifmagic
Sorry it will have to wait until tomorrow, I have had work up to my eyeballs. https://www.sharkyforums.com/
Yeah that was 1.95Ghz and 2.0v. 133ºF is as high as I've seen it and that's the insto-second I come out of SSE2. Idles get as low as 120ºF. My case temp is usually reported as 84ºF, although I've seen both 82 and 86.Quote:
Originally posted by SoulEdge
Saps, I can't find the exact post but I remember you saying your load temps w/ 1.95 Vcore were about 133 F (56 C) right? I'm trying to gauge how effective my cooling is right now and was wondering what your average case temps are? My room gets pretty hot in the summer so my case temps are about 32 C and my [email protected] 1.775 Vcore idles around 43 C and loads in the high 40's. This is with a SLK-800 and Vantec Tornado.
what case are you running your system in? that could hinder your cooling possiblyQuote:
Originally posted by sapasion
Yeah that was 1.95Ghz and 2.0v. 133ºF is as high as I've seen it and that's the insto-second I come out of SSE2. Idles get as low as 120ºF. My case temp is usually reported as 84ºF, although I've seen both 82 and 86.