Quote:
Originally posted by lostlilchild6
I would like to see a review with against an athlon XP, in alot of games. Im a gamer :D. Like Mohaa, Dungeon Siege, C&C renegade, yadda yadda yadda. :).
Maybe KJY9 is up to the challenege .....:confused: :)
Printable View
Quote:
Originally posted by lostlilchild6
I would like to see a review with against an athlon XP, in alot of games. Im a gamer :D. Like Mohaa, Dungeon Siege, C&C renegade, yadda yadda yadda. :).
Maybe KJY9 is up to the challenege .....:confused: :)
He He..it's no challenge..I finished MOHAA and don't play those other games.Quote:
Originally posted by cocacola155
Maybe KJY9 is up to the challenege .....:confused: :)
You can read here how it does in gaming though ;)
http://www.anandtech.com/cpu/showdoc.html?i=1605&p=8
Quote:
Originally posted by KJY9
He He..it's no challenge..I finished MOHAA and don't play those other games.
You can read here how it does in gaming though ;)
http://www.anandtech.com/cpu/showdoc.html?i=1605&p=8
Yea but theose sites all do the same BS. THey NEVER bench other demanding games like MOH AA etc....
I would like tosee which CPU performs better at that ;)
He He...well if you saw on the Classifieds forum here at SF..I sold my MOHAA.Quote:
Originally posted by cocacola155
Yea but theose sites all do the same BS. THey NEVER bench other demanding games like MOH AA etc....
I would like tosee which CPU performs better at that ;)
Put a fork in me, I'm done benching this rig.
If you want more benches...buy one! ;)
Quote:
Originally posted by KJY9
He He...well if you saw on the Classifieds forum here at SF..I sold my MOHAA.
Put a fork in me, I'm done benching this rig.
If you want more benches...buy one! ;)
great Run Kevin!
Cant wait to see you oc those 0.13 Tbreds! WHOA! :)
One last question Kev, how goes the multi-tasking compared to the AXP and Willy? :)
I ran the render while downloading a large file as well to test out that part of multitasking...as the Willie choked on the render, while the Woody did just fine.Quote:
Originally posted by ZhaoYun
One last question Kev, how goes the multi-tasking compared to the AXP and Willy? :)
It seems to be Ok with Photoshop and Live Motion both doing light tasks at the same time.
I think the 512k cache helped this out, but I'm not sure...I'm no engineer and don't know all the differences between the Willie & Woody.
So in short...I'm pleased with the multitasking on the Woody.
I would have liked to have seen more significant performance gains from an 860Mhz OC....but you can't have it all? ;)
Wow I think I'm a bit late to say this but congratulations on that amazing oc ;).
was that your single XP or your dual XP rig in the "real world" tests?
It was my Single...and I just noticed I had [email protected] was a 2100+@1987 on the Epox 8k3A+..I just fixed it in the thread...sorry for the confusion ;)Quote:
Originally posted by mellojoe
was that your single XP or your dual XP rig in the "real world" tests?
Kev, how far will you be able to take a 2.4Ghz? Past 3Ghz right?
So I guess your gonna stay with AMD?Quote:
Originally posted by KJY9
It was my Single...and I just noticed I had [email protected] was a 2100+@1987 on the Epox 8k3A+..I just fixed it in the thread...sorry for the confusion ;)
The woody hasnt changed ur mind even the slightest bit?
I just love questions like that he he.Quote:
Originally posted by GeForce
Kev, how far will you be able to take a 2.4Ghz? Past 3Ghz right?
There are too many variables in an OC to answer that question definitively without actually doing it.
You might...you might not...I'm thinking you should purchase one and let us all know how it does...I'd be very interested in knowing the answer to that as well ;)
Not really Tio...it's an ok proc that's very easy to OC, which makes it a great choice for many.Quote:
Originally posted by tio2k
So I guess your gonna stay with AMD?
The woody hasnt changed ur mind even the slightest bit?
After I sell this one, I'll likely go for a T-Bred ;)
LOL sure, I purchase one... Will you pay? ;)Quote:
Originally posted by KJY9
I just love questions like that he he.
There are too many variables in an OC to answer that question definitively without actually doing it.
You might...you might not...I'm thinking you should purchase one and let us all know how it does...I'd be very interested in knowing the answer to that as well ;)
He He..You're the one that wants more gaming benches..not I ;)Quote:
Originally posted by GeForce
LOL sure, I purchase one... Will you pay? ;)
Nice O/C Kev. It surprises me that you went the Intel route again.
However, sometimes I think you buys this stuff just to o/c. You have no intention of using it, just o/c and benchmark it. Oh well, if I had that kind of money to spend on computer parts, I would probably do the same thing. :D
Wow, that's actually some nice performance from the 1.8a. If it's only a few second seperation when you're comparing it to a cpu that's two levels higher than it, in any standards of comparison, I consider that good.
Anyway, with the programs you're running, it might be best to stick with the dual cpu's, at least until prescott. ;) :D
Very nice OC :)
What do you use that rig for if you keep your 4600 in the daulie ?
OK...last time he he..I'm far from being rich...sorry to disappoint everyone! :rolleyes:Quote:
Originally posted by Un4given
Nice O/C Kev. It surprises me that you went the Intel route again.
However, sometimes I think you buys this stuff just to o/c. You have no intention of using it, just o/c and benchmark it. Oh well, if I had that kind of money to spend on computer parts, I would probably do the same thing. :D
I sell my rigs almost faster than I can build them. That's not alot, but lately about one or two a week. So this time I tried a Woody just to see what the commotion was about.
I got a nice 860Mhz Oc out of it...and if you're into bragging rights on high Mhz and a very easy OC, then the Woody is for you!
The good thing about trying out this rig is that I'll get a bit more money for it than an XP rig.
The one chip that I'm truly excited about is the Hammer. When it comes out, you'll see me :) big time! ;)
It's my "backup rig", just in case something happens to my main rig...and to tell you the truth...it rarely even gets booted once it's built and benchmarked. If I need to download a large file overnight (since it's the quiet one), if a friend comes over for some network gaming (not too often), or for using Dragon Naturally Speaking (to talk/type school papers on). ;)Quote:
Originally posted by FaTs
Very nice OC :)
What do you use that rig for if you keep your 4600 in the daulie ?
Just call Kevin,
A great business man :)
Quote:
Originally posted by KJY9
OK...last time he he..I'm far from being rich...sorry to disappoint everyone! :rolleyes:
I sell my rigs almost faster than I can build them. That's not alot, but lately about one or two a week. So this time I tried a Woody just to see what the commotion was about.
I got a nice 860Mhz Oc out of it...and if you're into bragging rights on high Mhz and a very easy OC, then the Woody is for you!
The good thing about trying out this rig is that I'll get a bit more money for it than an XP rig.
The one chip that I'm truly excited about is the Hammer. When it comes out, you'll see me :) big time! ;)
ahh yes the same old I tried it it wasnt as fast and now I sell it blah blah blah next time try and use plugins optimized for the P4, Your not being objective when you use plugins bests suited for the XP. Anyways I noticed a huge difference going from 1.6 to 2.4 and I'm not even using good ram yet.
I think I will wait for real reviews from anandtech and toms they might be biased in their comments but atleast they don't lie to your face.
Quote:
Originally posted by Newbie-Overclocker
ahh yes the same old I tried it it wasnt as fast and now I sell it blah blah blah next time try and use plugins optimized for the P4, Your not being objective when you use plugins bests suited for the XP. Anyways I noticed a huge difference going from 1.6 to 2.4 and I'm not even using good ram yet.
I think I will wait for real reviews from anandtech and toms they might be biased in their comments but atleast they don't lie to your face.
?????????????
Nice thread crap !
Now to back up the garbage you just spewed forth...show me where Kai's Power Tools plugins are optimized for the XP processor?!?
This plugin was around long before the XP was even in existence.
Go crap on someone elses thread....your ignorance is not welcome here ;)
You beat me too it, i miss making fun of newbie :(Quote:
Originally posted by KJY9
?????????????
Nice thread crap !
Now to back up the garbage you just spewed forth...show me where Kai's Power Tools plugins are optimized for the XP processor?!?
This plugin was around long before the XP was even in existence.
Go crap on someone elses thread....your ignorance is not welcome here ;)