Printable View
That's a good score for your setup. When you say no overclcoking is that only for the Video Card or for CPU too?Quote:
Originally posted by TeeTee
Just formatted Win XP and came back to
Win 98SE
DirectX 8.1
Detonators 27.42
No Overclocking/ No Optimization
All default settings
3dmark2001SE: 6202
-TT-
Any news on 3dmark 2002?
my old irongate classic won't even run 3dmark2001...the new system does 6832...overclocked of course :D
Processor: AMD Athlon(tm) @ 1.44 GHz
Graphics Card: NVIDIA GeForce3 Ti 200 230/475
Total Physical Memory: 512 MB
7011 3DMark Se
6841 with stock speeds on 8500. :D
SSXeon
a pitiful 2605 is my best...although its not as bad as it seems. I can play Quake3 or castle Wolfenstein great at 1024x768x32, so I take 3dMark scores with a grain of salt. anyway, here's my compare URL http://gamershq.madonion.com/compare2k1.shtml?2846222
P3 850 @ 1020
512MB @120
geForce2 MX @ 220/190
thats all that matters...
KP
this is the most succesfull thread i have ever seen:eek: :cool: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
One week and counting, and my motherboard will be back from RMA.
One week Thebove, one week until it starts again ;)
3188 @ 175/286
3500 @ 200/333
10000 @ ?/?
lol
>8^)~
my highest was....9009. only thing OC'd was the vid card at 280/580. system specs below:
Abit KR7A-RAID
Athlon xp 2000+
256MB Micron PC2100
Visiontek Geforce3 ti500
Win xp Pro
:cool:
Posting a really good score w/o a published link is begging for doubt. However 9000+ w/ NW2.4@133FSB + R85@290 sounds "reasonable."Quote:
Originally posted by marv
Guess it got covered, didn't know there was one. It's on a P4 1.8a OC'ed to 2.4 and a Newegg special 230/230 flashed to the OEM 250/250, then Overclocked with powerstrip to 290/290, sound reasonable now?
But daaaammm, you got an OEM R85-230 to do 290? I repeat, daaaaaaammmm! Overvolting? What's the memory speed on the card (ns)? Inquiring mind wants to know.
I bought the Newegg 230/230 (3.6ns) and with powerstrip it max'ed out at about 255/255, if I recall. So I figured if it would run at 255/255 why not flash the BIOS to a OEM 250/250, which I did. After the OEM BIOS flash, it now will crank up to 295/295. Maybe I just got lucky, no other modifications were needed to the card.Quote:
Originally posted by Molochi
Posting a really good score w/o a published link is begging for doubt. However 9000+ w/ NW2.4@133FSB + R85@290 sounds "reasonable."
But daaaammm, you got an OEM R85-230 to do 290? I repeat, daaaaaaammmm! Overvolting? What's the memory speed on the card (ns)? Inquiring mind wants to know.
It's the memory (3.6ns), mine came with Hynix 4ns clocked at 250. They wouldn't do more than 260 without creeping artifactism (heat buildup) With added sinks, as2 doctored epoxy, and tlc I can run at 270 forever w/o arti, but obviously not enough to retail flash. Your GPU clocks higher too. Mine gets bugged at around 286. Sound like you might be running at retail voltage already. Pretty coo.Quote:
Originally posted by marv
I bought the Newegg 230/230 (3.6ns) and with powerstrip it max'ed out at about 255/255, if I recall. So I figured if it would run at 255/255 why not flash the BIOS to a OEM 250/250, which I did. After the OEM BIOS flash, it now will crank up to 295/295. Maybe I just got lucky, no other modifications were needed to the card.
You got a good one. :)
DANG IT!
This will hit 1,000 if I have to do it myself!
So anyway:
Is their an actual day set for when the 4 Ti 4200's come out?
Is there ANY news on 3dmark 2002?
http://www.amdmb.com/vb/showthread.p...threadid=35927
THAT is a thread. 34074 replies and counting.