OK, what am I doing wrong. I go into Rage3D Tweak Overclocker and set up for say 400-340, make a 3dmark01 run, get 16472 (no CPU OC). Reboot, set up 410-342, run 3dmark01, get LOWER score! Huh??? :eek:
Printable View
OK, what am I doing wrong. I go into Rage3D Tweak Overclocker and set up for say 400-340, make a 3dmark01 run, get 16472 (no CPU OC). Reboot, set up 410-342, run 3dmark01, get LOWER score! Huh??? :eek:
CPU - Intel 2.4C (262 x 12.0) 1.55 Vcore
Motherboard - Abit IC7
RAM - Kingston hyper-x pc3500 (2 x 512) 2-5-2-2 2.7 Vdimm
Video card - Radeon 9800 Pro 450 Core, 375.75 memory
Operating system - XP Pro
Cooling - SLK-900 w/ tornado 92 mm fan. No mods to the video card.
Score - http://service.futuremark.com/compare?2k1=6915769
I think it ranks me number 8 :D
Just add our link into your sig and you are set to be a member! :)
Quote:
Originally posted by Alientank
CPU - Intel 2.4C (262 x 12.0) 1.55 Vcore
Motherboard - Abit IC7
RAM - Kingston hyper-x pc3500 (2 x 512) 2-5-2-2 2.7 Vdimm
Video card - Radeon 9800 Pro 450 Core, 375.75 memory
Operating system - XP Pro
Cooling - SLK-900 w/ tornado 92 mm fan. No mods to the video card.
Score - http://service.futuremark.com/compare?2k1=6915769
I think it ranks me number 8 :D
Ok, i found out why i can´t publish scores, it seams that nobody with a 9800SE softmodded to 9800Pro can publish scores with any drivers :( , damn this sucks, and i would have been in 20:th place too :(
Quote:
Originally posted by ranger2992
Ok well this is it for now. If you could please update my score it would be much appreciated:D
Motherboard: Abit IC7-G, Bios 16
CPU: P4
Stock: 2.8 Ghz
OC: 3.8 Ghz
VC 9800P
Stock Core: 378
OC Core: 465
Stock Mem: 339
OC Mem: 380
Watercooled CPU, GPU and NB
3DMark2001 Score: 22338
http://service.futuremark.com/compare?2k1=6916264
Hopefully Abit new Bios for the IC7-G will help me get a little higher. If not, oh well I ain't complaining about a 1 Ghz overclock on this rig:D
Very very nice Ranger!!!!:)
Damn you are so close to me! Looks like it may be time for me to bench again with some different drivers and a new bios.:D:D
Will do right now!Quote:
Originally posted by Colossus
Just add our link into your sig and you are set to be a member! :)
New '03 scores. fifth place.
CPU: Athlon XP 2500+
Stock Speed of CPU: 1833
Overclocked speed of CPU: 2438
MotherBoard: EPoX EP-8RDA+
Ram: 512mb Crucial PC2700
Video Card: ATI Radeon 9800
Stock Core of Video: 325
Actual Core of Video: 465
Stock Mem of Video: 290
Actual Mem of Video: 387
Cooling Used: CPU: Aero7+ GPU: Giant II
Your scores with links: 6679
http://service.futuremark.com/compare?2k3=1204422
Added!!! #8!!!Quote:
Originally posted by Alientank
CPU - Intel 2.4C (262 x 12.0) 1.55 Vcore
Motherboard - Abit IC7
RAM - Kingston hyper-x pc3500 (2 x 512) 2-5-2-2 2.7 Vdimm
Video card - Radeon 9800 Pro 450 Core, 375.75 memory
Operating system - XP Pro
Cooling - SLK-900 w/ tornado 92 mm fan. No mods to the video card.
Score - http://service.futuremark.com/compare?2k1=6915769
I think it ranks me number 8 :D
he's not 8th for long! now we're tied!!
CPU: Athlon XP 2500+
Stock Speed of CPU: 1833
Overclocked speed of CPU: 2438
MotherBoard: EPoX EP-8RDA+
Ram: 512mb Crucial PC2700
Video Card: ATI Radeon 9800
Stock Core of Video: 325
Actual Core of Video: 465
Stock Mem of Video: 290
Actual Mem of Video: 387
Cooling Used: CPU: Aero7+ GPU: Giant II
Your scores with links: 20126
http://service.futuremark.com/compare?2k1=6918869
Ohhh!!!! I updated you! :) I tried to standardize the 3DMark page... Hmmm I wonder if we can get a new field for CAT drivers :DQuote:
Originally posted by eshbach
he's not 8th for long! now we're tied!!
CPU: Athlon XP 2500+
Stock Speed of CPU: 1833
Overclocked speed of CPU: 2438
MotherBoard: EPoX EP-8RDA+
Ram: 512mb Crucial PC2700
Video Card: ATI Radeon 9800
Stock Core of Video: 325
Actual Core of Video: 465
Stock Mem of Video: 290
Actual Mem of Video: 387
Cooling Used: CPU: Aero7+ GPU: Giant II
Your scores with links: 20126
http://service.futuremark.com/compare?2k1=6918869
Wow, the exact same score between two members. Thats quite rare...
Very rare and totally different hardware!!!!Quote:
Originally posted by Pyro
Wow, the exact same score between two members. Thats quite rare...
Since my name starts with A and his with E, by alphabetical order, I go ahead of him :p
Edit: Saw list, damn you! haha
We aren't tied anymore ;)
http://service.futuremark.com/compare?2k1=6919129
Check out the comments section :p
Only changes to system were fsb from 262 down to 261 for more stability, and the mhz of the core and gpu memory.
Well I updated you once again Alientank :D
Spanks! :D Like my comment I left him? :pQuote:
Originally posted by Colossus
Well I updated you once again Alientank :D
hey vert or colossus....i was looking at my 3dmark2001 score and link and that isn't me!....lol....the link to my score is:http://service.futuremark.com/compare?2k1=6781976 and the score is 19800 :D
I fixed it, but that was very odd...Quote:
Originally posted by l_bastard
hey vert or colossus....i was looking at my 3dmark2001 score and link and that isn't me!....lol....the link to my score is:http://service.futuremark.com/compare?2k1=6781976 and the score is 19800 :D
EDIT:
Alientank - ROFL Nice.. But come on you can go higher.. He doesnt need to do much to beat your score or atleast tie it again :D
This fsb will not budge past 262, seriously even at 1.7 vcore it wont move :( all I can do is stuff with the vid card.Quote:
Originally posted by Colossus
I fixed it, but that was very odd...
EDIT:
Alientank - ROFL Nice.. But come on you can go higher.. He doesnt need to do much to beat your score or atleast tie it again :D
You're running 5:4, right?Quote:
Originally posted by Alientank
This fsb will not budge past 262, seriously even at 1.7 vcore it wont move :( all I can do is stuff with the vid card.
Try 3:2 or 2.5CL and try to push the FSB... See if that helps... I noticed that some boards (unless extreme voltages) will not run the memory close to their rated speeds.. So try that :)Quote:
Originally posted by Alientank
This fsb will not budge past 262, seriously even at 1.7 vcore it wont move :( all I can do is stuff with the vid card.
Its a way to find out if its your processor or memory :)
I'm on 3:2 right now. Do you think it would be best to go to 5:4 and then maybe I would be able to boost it up big time? Would going 5:4 decrease performance big time though?Quote:
Originally posted by Colossus
Try 3:2 or 2.5CL and try to push the FSB... See if that helps... I noticed that some boards (unless extreme voltages) will not run the memory close to their rated speeds.. So try that :)
Its a way to find out if its your processor or memory :)
Your at 3:2 and your CPU wont budge??? That is harsh :(
I would try 5:4 that would improve your over by a nice amount :)
Try switching to 5:4 - it would be a huge improvement, even if you have to relax your timings a bit to do it.Quote:
Originally posted by Alientank
I'm on 3:2 right now. Do you think it would be best to go to 5:4 and then maybe I would be able to boost it up big time?
Alright I will go 5:4 how much higher do you think the fsb would go?