woohoo, 15k here I come! just bought two sticks of hyperX pc3k ram

im so glad I dont have an nf2 mobo, cause I got hyperX ram and those hate nf2 boards. with that said, pc3k at 2-2-2-6-t1 timings. I should get well over 200fsb with that baby and 3v running thru her at 2-2-2-6-t1 timings too, I wont settle for slower timings! bought two sticks of 256mb, that way ill use the stronger stick for the better scores. ill be the first and only shark with 15k on a ti4200 and make FRIST place on the sharky team :eek: :D if I really luck out, I may get 15.5k or around that and if I get an albatron ti4200, make it 16k :eek: boy im drooling now, such power!!!!!!!!!! :p

Where is the rolleyes when you need it. Congrats...I guess. 3 volts? Hope you enjoy throwing away memory.

wishing you luck, but i think your MB is still the limiting factor.

don't know why you have the hate for NF2 boards, i have been sailing above 200 FSB, even when i had an epox, but it was really hard. the nf2 makes it easy.

the abit's rule if they don't puke.

clock on.

baldy:D

three volts? your plans may be cut short due to the fact that they'll probably die not too long after...

Quote:

---

Originally posted by Thunderbird1GHz
im so glad I dont have an nf2 mobo, cause I got hyperX ram and those hate nf2 boards...

---

Jeez dude... this "friend" of yours really likes to fill your little head with BS.


Just in case you didn't know... the Hyper-X issues only existed with the 8RDA+ board by Epox... I'll tell you first hand, because I (unlike you) have actually owned the hardware ;). I used the same ram in my NF7-S in DC and had NO problems at all!


None the less.... good luck on your 15k.... ;) ::sneaky laughter::

Are you saying that my HyperX hates my 8RDA+??? Ahhh! :eek: I don't think so! They are best frieds! :D

Quote:

---

Originally posted by Ignitionator
Are you saying that my HyperX hates my 8RDA+??? Ahhh! :eek: I don't think so! They are best frieds! :D

---

I have to admit I DID have issues w/HX and 8RDA+ - since resolved via RMA.

Aside from that, who will join me in personal apologies if Tbird hits 15K with his Ti4200?

(....Sound of one hand clapping......)

i think he can, i mean its only 400 points away, and i guess with better ram he could hit it, but if he had a NF2 mobo, like the Abit NF7-S mobo, and overclocked that baby to the max, i'm even willing to say he might hit 16k

3v is going to be hell on your ram

Quote:

---

Originally posted by hwmicre
I have to admit I DID have issues w/HX and 8RDA+ - since resolved via RMA.

Aside from that, who will join me in personal apologies if Tbird hits 15K with his Ti4200?

(....Sound of one hand clapping......)

---

lol... I dont re-call ever doubting he would score 15k... I mean heck, he does advocate that TI4200 of his very much.. so it'd be a surprise if he DOESN'T hit it.. especially with this insanely fast cpu.... ::coughs::

"Congrats...I guess. 3 volts? Hope you enjoy throwing away memory."


my friend says itll be fine up to a bit over 3 volts for short periods of time, just dont run it 24/7 or itll die early, but for benching ill go up to 3.15v I ran my corsair ram at 3.15v fine though. Of course if I get a high fsb on less volts, then yippee :D


"wishing you luck, but i think your MB is still the limiting factor."

I will find out. My friend says I should worry a little about my hdd. I shall set it to pio3 mode past 200fsb then. 3dmark doesnt care about your hdd anyway.


"don't know why you have the hate for NF2 boards, i have been sailing above 200 FSB, even when i had an epox, but it was really hard. the nf2 makes it easy."


If my hardware can handle high agp/pci speeds and so can my ram, I dont see why 215+ will happen :D


"Jeez dude... this "friend" of yours really likes to fill your little head with BS."


hes serious and hes right, my corsair took 3.15v and you were right, running 2+ volts wont kill the cpu and im pumping 2.2v in my xp2000 when benching :D


"NF7-S in DC and had NO problems at all!"


ok even if it worked, Ranger had three nf7 mobos die on him and now hes giving up and going the intel route.


"None the less.... good luck on your 15k.... ::sneaky laughter::"


I will make it happen, no luck needed. also ill make 9k happen on my mx440 like I wanted to for a long time. I may get 12.5k on the ti500 as well.


"Are you saying that my HyperX hates my 8RDA+??? Ahhh! I don't think so! They are best frieds!"


ok so some lucked out, but I shall smash your score on a kt400 :D
heck even if I matched your fsb and cpu MHz I should match your score. I see no real advantage your nf2 chipset has, heck im 60 marks away from you at 190fsb, imagine 215fsb, I would totally eat you! 15k and a couple hundred! you eat me by less than 2fps in car chase high details and you have an xp2400 plus 206fps against my xp2000 and 190fsb. You will need to find a way to break 15k yourself. Get the ram higher, get nature past 85fps, get 40.72 drivers, oc your cpu and fsb more and youll also break 15k. You probably could break 15k right now even. your nature is a few fps low for the oc your card has me thinks :confused: I got 80fps at 280/560 and your core is higher so you should get a bit over 80fps even with 560MHz ram bandwith.


"and overclocked that baby to the max, i'm even willing to say he might hit 16k"


yea right, I may gain 200 more marks or so if I run dual channel but meh thats it. look at Ignitationator's score. His hardware is better than mine yet were nearly tied!

Tbird.... you willing to to step into a TI4200 challenge with me? ;) My card of choice will be an MSI Geforce4 TI4200... and a 128mb one too ;). let me know. If highest 3DMark is your game, then I would like to join in on the fun... and just to play it fair, I'll refrain from using my Intel rig, and only use my AMD. Since according to you, you "eat" (tm) bartons, heh.

FIGHT FIGHT FIGHT!!!!!

I am taking all bets. Odds are 3-1 in Lostchilds favor:D

Quote:

---

Originally posted by ranger2992
FIGHT FIGHT FIGHT!!!!!

I am taking all bets. Odds are 3-1 in Lostchilds favor:D

---

Do you take personal checks? :p I'm going with lost as he's got an nForce2 board against T'bird's KT400. An nForce2 oughta whop a KT400 a$$! This is soooo...darn cool!!! C'mon T'bird, the line has been drawn, time to ante up!!!!:D

Only accept cash, or credit cards. Nothing personal, but I have received too many rubber checks:eek: LOL this is gonna be fun:D