Printable View
Herr is mine: neat and functional (aka I didn't use so many tie wraps and tuck wires beside stuff so much that is would be a huge chore to change something around inside my case).
http://neorevolutionary.tripod.com/6.jpg
paste the url into the address bar
You did a nice job with that. What is that gray wire that hooks up to our lowest PCI card?
Thats the sound card so the one on the left goes to the CDROM or whatever & the one on the right not sure where that goes..Quote:
Originally posted by dudewth
You did a nice job with that. What is that gray wire that hooks up to our lowest PCI card?
I need to rework all that Black Loom its a little to much.
https://www.sharkyforums.com/
https://www.sharkyforums.com/
The lowest pci card is my Audigy. One wire is the analog connetion to my Plextor, and the other is the digital sound connection. I pluged them to the plextor because of someting I read about it being very good for cd reading (forgot exactly what the technology it uses is:p).I'm also pretty happy w/ my floppy cable, it is actually good that it is flat since I can run it under my mobo.Quote:
Originally posted by dudewth
You did a nice job with that. What is that gray wire that hooks up to our lowest PCI card?
Yeah it kinda is a bit much. It looks good, but I'd think all that black tubbing would hurt the airflow (for the psu wires) since it makes all the psu wires fatter. But if you are getting good temps, keep them, then look pretty awesome. But I have seriously seen some horrible stuff with that tubeing. One guys case was pretty much filled by all the tubbing. Great job TAZ!!!Quote:
Originally posted by TAZTG
Thats the sound card so the one on the left goes to the CDROM or whatever & the one on the right not sure where that goes..
I need to rework all that Black Loom its a little to much.
http://mywebpages.comcast.net/taztg/PICS/Dcp_1327.jpg
http://mywebpages.comcast.net/taztg/PICS/Dcp_1516.jpg
here's some neat for ya:
https://www.sharkyforums.com/
http://muisejt.com/pictures/axpinside2.jpg
How much did that black tubing cost ?
Ah that's what I thought, I just wasn't sure why there were 2 connections.Quote:
Originally posted by pudad
The lowest pci card is my Audigy. One wire is the analog connetion to my Plextor, and the other is the digital sound connection. I pluged them to the plextor because of someting I read about it being very good for cd reading (forgot exactly what the technology it uses is:p).I'm also pretty happy w/ my floppy cable, it is actually good that it is flat since I can run it under my mobo.
Quote:
Originally posted by muisejt
here's some neat for ya:
2 pics
Nice, nice. I always like clean case wiring better when it is done w/ flat cables w/o being rounded. Much more challenging. I applaud your work.
The tubing TAZTG has on his psu?Quote:
Originally posted by Lord Cecil
How much did that black tubing cost ?
I think he got it from an "Autozone" type store, so it's likely dependent on how much things are around you.
I think I may do something "kind of" like what TAZ has done, but I'm going to swoop around the back more than him, so you can't see many wires.
I'm just having trouble finding molex extenders. :(
Either way, I'll have some pics up once I get my round cables and all. :)
I think I did a good job considering how freaking full my case is (total of 7 IDE devices :eek: )
And the GF4 just squeeked in there... I had to take out the one set of black IDE cables just to install it.
https://www.sharkyforums.com/
I do have some plans for this weekend to make it even neater... :)
Put that floppy some where else, and spread those drives out. You can put a 92mm fan in those drive cages if you take out the 80mm fan mount thing (the purple thing). And arrange 2 drives per cage like I did (so that plenty of air goes over both sides of each drive.Quote:
Originally posted by Wurm
I think I did a good job considering how freaking full my case is (total of 7 IDE devices :eek: )
And the GF4 just squeeked in there... I had to take out the one set of black IDE cables just to install it.
http://www.actvsdei.com/~wurm/inside.jpg
I do have some plans for this weekend to make it even neater... :)
Here, this is my opinion on the best intake/ hdd configuration for an sx1030 case requires some minor modding:
http://neorevolutionary.tripod.com/Ideal1030.jpg
It would be a good idea to remove the floppy bay covers to maximize air flow on the top fan. I'd recomend putting a fan grill on the side of the top fan facing the front of the case (or you could drill a bunch of holes in the floppy bay covers and leave them there).
Edit: remeber, paste the url into address bar.
Yea, I got them from Trak-Auto, Radio Shack also carries them. I am planning on redoing the wiring like OCking suggested awhile back. Hey I have seen Molex Extenders at Best Buy. Plus local Puter Stores should carry them. :DQuote:
Originally posted by CrawlingEye
The tubing TAZTG has on his psu?
I think he got it from an "Autozone" type store, so it's likely dependent on how much things are around you.
I think I may do something "kind of" like what TAZ has done, but I'm going to swoop around the back more than him, so you can't see many wires.
I'm just having trouble finding molex extenders. :(
Either way, I'll have some pics up once I get my round cables and all. :)
Thanks, TAZ.
I'm thinking I'll run them largely in back of my case and tape 'em to the mobo tray with the psu cable covers over whatever's showing inside the case.
I may make a trip down to RadioShack soon (aka today).
How much do the molex connectors usually run? $2?
https://www.sharkyforums.com/
its not too fancy but it gets the job done
Err NO! thats not a floppy its a Superdisk drive that I use to transfer files from home to work and back...Quote:
Originally posted by pudad
Put that floppy some where else, and spread those drives out. You can put a 92mm fan in those drive cages if you take out the 80mm fan mount thing (the purple thing). And arrange 2 drives per cage like I did (so that plenty of air goes over both sides of each drive.
AND MY HDDs are not hot!! I am getting enough airflow over and under them.
Ah just a question, WHO STOLE YOUR RAM!?! ;)Quote:
Originally posted by fbs1992
http://68.42.168.167/DSC00769.JPG
its not too fancy but it gets the job done
and windex sprayed onto a soft cloth gets rid of fingerprints well!
I see the ram in slot 1...look closly at the white tabs on the top and bottom of the slot. Geez...your a moderator!?!:confused:Quote:
Originally posted by Wurm
Ah just a question, WHO STOLE YOUR RAM!?! ;)
and windex sprayed onto a soft cloth gets rid of fingerprints well!
Im a Moderator who just got home after working a 14hr shift and I wear glasses... SO SUE ME!! :p
its a bad pic. my digi cam needs recharging:)
Heh, i think i will win the messiest of them all contset... and spare me the rant about the quality, its a 3 year old 3com webcam...
bottom of the pic is the rear of the comp, so yeah...
www.angelfire.com/sc2/STA/mobo.jpg
Drag the link :D
http://68.42.168.167/DSC00771.JPG
heres the inside of my server. beat that:D
http://www.msnusers.com/daejme%40msn...nts/0000%2EJPG
A little blurry...sorry
I need to get some twistie ties and get everything all cleaned up. Once I get unlazy and run the wires bedind the mobo (not directly behind it but you get the idea)
here is the pic sorry for the blurryness and the *** neon (crappy camera wasnt picking anything up)
http://img2.ranchoweb.com/images/cra...se.6334354.gif