LED and Power & reset switches too mobo?

Printable View

10-07-2001, 08:27 PM
el_kingbob

LED and Power & reset switches too mobo?

Hi i need too know how the connectors for a case plug into K7S5A motherboard?

the setup is like this

9•7•5•3•1• <--- The pins
--8•6•4•2• <--- The pins

the switches plug into it. (switches are HDD LED, POWER LED, POWER SWITCH, RESET SWITCH, the POWER led has three ••• pin holes and the rest have two pin holes ••)
10-07-2001, 09:14 PM
CadetLee

Quote:

the switches plug into it.

Seems as you answered your own question https://www.sharkyforums.com/images/.../2005/06/5.gif
They just plug in..

------------------
System specs

Heatware
10-07-2001, 09:21 PM
el_kingbob

Quote:

Originally posted by CadetLee:

Quote:

the switches plug into it.

Seems as you answered your own question https://www.sharkyforums.com/images/.../2005/06/5.gif
They just plug in..

They plug in in a certain order or they wont work, need too know oreder
10-07-2001, 09:34 PM
slydog

Quote:

Originally posted by el_kingbob:
Hi i need too know how the connectors for a case plug into K7S5A motherboard?

the setup is like this

9•7•5•3•1• <--- The pins
--8•6•4•2• <--- The pins

the switches plug into it. (switches are HDD LED, POWER LED, POWER SWITCH, RESET SWITCH, the POWER led has three ••• pin holes and the rest have two pin holes ••)

How about looking in the Mobo Manual?? lol

try this.. HDD LED 1+3, Reset 5+7
Power switch 6+8
And for your 3 pinned Power LED make sure the coloured wire is on pin 4

Mine worked, =P

thanks

slydog
10-07-2001, 10:14 PM
el_kingbob

Quote:

Originally posted by slydog:

How about looking in the Mobo Manual?? lol

try this.. HDD LED 1+3, Reset 5+7
Power switch 6+8
And for your 3 pinned Power LED make sure the coloured wire is on pin 4

Mine worked, =P

thanks

slydog

thanks

i think i tried that though that was the first thing. If those arent plugged in right will the computer not start?
10-07-2001, 10:18 PM
el_kingbob

Quote:

Originally posted by el_kingbob:

thanks

i think i tried that though that was the first thing. If those arent plugged in right will the computer not start?

where do they go exactly (positives and negatives)
10-07-2001, 10:19 PM
el_kingbob

Quote:

Originally posted by el_kingbob:

where do they go exactly (positives and negatives)

Looked at the manual through and through so THERE!lol
10-07-2001, 10:26 PM
slydog

Quote:

Originally posted by el_kingbob:
Looked at the manual through and through so THERE!lol

I guess you dont understand what you have read.. do you!!!.. lol j/k

the writing on the plugs facing out.. if it doesnt work then its backwords.. simple concept eh? ..hehe

later.. slydog
10-07-2001, 10:27 PM
el_kingbob

Quote:

Originally posted by slydog:
I guess you dont understand what you have read.. do you!!!.. lol j/k

the writing on the plugs facing out.. if it doesnt work then its backwords.. simple concept eh? ..hehe

later.. slydog

ok ill try it
if it doesnt work though, then what?
10-07-2001, 10:34 PM
el_kingbob

Quote:

Originally posted by el_kingbob:
ok ill try it
if it doesnt work though, then what?

It Doesnt work!?!?!?!
10-07-2001, 11:08 PM
el_kingbob

Quote:

Originally posted by el_kingbob:
Hi i need too know how the connectors for a case plug into K7S5A motherboard?

the setup is like this

9•7•5•3•1• <--- The pins
--8•6•4•2• <--- The pins

the switches plug into it. (switches are HDD LED, POWER LED, POWER SWITCH, RESET SWITCH, the POWER led has three ••• pin holes and the rest have two pin holes ••)

my comps still frigged up
10-07-2001, 11:18 PM
slydog

Is the switch on the back of the power supply turned on?

Is the power supply plugged into the mobo??

Do any fans Spin up or CDROM light go on when you hit the power button?

slydog
10-08-2001, 12:16 AM
el_kingbob

Quote:

Originally posted by slydog:
Is the switch on the back of the power supply turned on?

Is the power supply plugged into the mobo??

Do any fans Spin up or CDROM light go on when you hit the power button?

slydog

the switch is flicked on, the power supply is plugged to the power socket in mother board, no fans go on or anything.
10-08-2001, 12:25 AM
CadetLee

Try touching a jumper to the pins..go 2 at a time until you find the power ones..that's where you plug the switch cable in https://www.sharkyforums.com/images/.../2005/06/5.gif

If that'll damage anything (I don't think so..I did it), someone say something..but again, I started my computer that way for a couple days and it still works https://www.sharkyforums.com/images/.../2005/06/5.gif

------------------
System specs

Heatware
10-08-2001, 12:27 AM
slydog

Sorry man... dunno what to tell you at the moment.... Oh.. check the General Hardware, as there are a couple posts on the pin(s) of the ECS Mobo.

slydog
10-09-2001, 06:30 PM
el_kingbob

Its cool guys i figured out the problem, the K7S5A motherboard has an LED the is for 3 (The middle space is empty) pins when the motherboard has two pins. I just cut out the middle one. The resaon it didnt start though was because the motherboard was grounded (screwed on too the case too much) and was inteferring with the circutry on the bottom.