Printable View
My worst ones were my tnt pci, that thing came stock at 110MHz ram and I could get her to 116MHz max. My mx440se 128mb was also bad, ram went from 333 to 350MHz max. oh the core on my geforce2 ti went from 250 to 260MHz if I remember, maybe not even that as there might have been minor texture corruption. I had a geforce2mx200 whose ram didnt like past 172MHz and stock was 166, now thats probably the worst overclocker ever!
I had a VooDoo2 that only went from 90mhz to 100mhz.:)
probably has to my 9700np. got it to @ 350/350 max, (because this is the only vidcard i oc-ed)
**ow wait i had a build by ati 9700pro for 2 weeks that was artifacting at 250/260 - below that was good :) (returned it though)
Given the percentage of o/c, from stock to max was definitely my Viper 770 TNT2 card.
My 8500 hasn't been too great. I can't really take it much past 285/285 from a stock of 275/275.
My new Leadtek ti200 didn't move even ONE Mhz without crashing or locking up... That must have been the worst POS I've ever seen.
Inno3D Geforce2 Pro 64 mb , when overclocked more than 3 mhz core the card crashed and gave me artifacts .
The most I could push my Voodoo5 5500 was from 166MHz to 177MHz.
Next in line would be my GeForce3 Ti200's memory that only went from 400MHz to 444MHz with so-so stability. It worked at 465 with a very few artifacts.
My Ti4600 core won't overclock past 300MHz on some games such as Unreal II because they stress the vertex/pixel shaders so much, while older games that don't use many advanced featured my Ti4600 can be overclocked to like 325MHz :mad:.
So I guess the summary is:
Voodoo5 - Stock 166MHz - OC'ed - 177MHz
GF3 Ti200 - Stock 400MHz - OC'ed 444MHz
GF4 Ti4600 - Stock 300MHz - OC'ed 300MHz
Same here. 285/285 is the best I could do. Just put it back to stock, wasn't worth the OC.Quote:
Originally posted by V5500-StillGoing
My 8500 hasn't been too great. I can't really take it much past 285/285 from a stock of 275/275.
Cheers,
My GF2 mx200 was 175/133 and the ram only went to 166 which is less than a stock MX400. My 8500le 250/240 is not bad with the gpu going as high as 285 but the ram will not go pass 255.:(
You need a pencil volt mod. Read up here..Quote:
Originally posted by V5500-StillGoing
My 8500 hasn't been too great. I can't really take it much past 285/285 from a stock of 275/275.
http://www.rage3d.com/
My worst o.c.ing card was a Sapphire Rage 128 that wouldn't go past 120. It actually performed better at stock. My best is the MX440 in my second rig... 325/720:eek: :eek: !
You got an MX440 up to 720?? :eek: What did it come stock at? That's a lot higher than my 64mb stock 4200!
Quote:
Originally posted by Captain Hook
You got an MX440 up to 720?? :eek: What did it come stock at? That's a lot higher than my 64mb stock 4200!
Mad Dog 8X AGP MX440 64meg, stock 275/500. Insane, huh???:eek: Anyhow, here is it's 3dmark.
http://service.futuremark.com/servle...&projectType=6
I'd have to say my RADEON9500Pro since it's clock locked and I'm too squimish (read: Poor) to do the softmod.
i had a Radeon 32 LE that wouldnt even run at stock core speeds until i upgraded the fan
Quote:
Originally posted by drs1771
Mad Dog 8X AGP MX440 64meg, stock 275/500. Insane, huh???:eek: Anyhow, here is it's 3dmark.
http://service.futuremark.com/servle...&projectType=6
link invalad, publish that score. also mine came stock at 270/405, did 330/550 wow nice overclock on yours, maybe yours had 3.5ns ram? mine honestly had 5ns hynix ram and I have no clue how it could possibily oc so far, damn even my 3.5ns ram on the ti4200 only did 560MHz. I guess maybe this was also 3.5ns ram remarked as 5ns due to too much demand for lower end stuff. Man I should get me one of those maddog geforce4mx cards, yours is 170MHz faster ram than mine too. Man if I had one of yours I could get over 9k easy, perhaps as much as 9500 :eek: