Printable View
I finally got my new mobo and installed the Athlon 1.4 GHz CPU and HSF with Arctic Silver II thermal compound. The CPU seems to be running a bit hot at 134 degrees fahrenheit or 57 degrees celsius. What's with that? do 1.4s run that hot? I was planning on overclocking.. will it be a problem? I have a 6500 RPM HSF in there as well.
------------------
***
My System Specs
1.4ghz tend to run really hot unfortunately http://dev.www.sharkyforums.forums.relay.cool/
I know mine runs at about 45C *slightly o/c'ed* and i dont' have any thermal compound, so i dunno what's up with your temps...are you sure u have the hs/f properly seated so forth? cuz that might affect it *that goes for the same with the thermal compound*
u might want to add some fans for intake cuz i know i have a 68cfm delta fan as an intake and many exhaust fans also to help me cool it down https://www.sharkyforums.com/images/.../2005/06/5.gif
------------------
AMD 1.4 GHZ
ASUS A7M266
512 DDR RAM w/ECC CRUCIAL
ELSA GLADIAC 920 G3
IBM DESKSTAR 60 GIG
SB LIVE VALUE
3COM 10/100 NIC
PLEXTOR 16/10/40A
PIONEER 16X DVD
ENERMAX 365 PSU
INWIN S508 (2 DELTA 68 CFM FANS)
That sounds unusually warm, even for a proc as fast as the 1.4. Anything really obstructing the airflow in your case? And I'm not trying to make ya look like a dummy or anything :-) but I have to ask if you're sure that the HSF is making the right contact with the core? Generally a temperature that high has something to do with poor airflow or something incorrect with the compound or the HSF...Quote:
Originally posted by Gladius:
I finally got my new mobo and installed the Athlon 1.4 GHz CPU and HSF with Arctic Silver II thermal compound. The CPU seems to be running a bit hot at 134 degrees fahrenheit or 57 degrees celsius. What's with that? do 1.4s run that hot? I was planning on overclocking.. will it be a problem? I have a 6500 RPM HSF in there as well.
------------------
AMD Athlon XP 1.4GHz/1600+ @ 1.53GHz/1800+ (133/266 FSB @ 145/290)
Shuttle AK31 rev. 3.1
256 MB Kingston PC2100
Visiontek Xtasy 6564 GeForce3 Ti200 @ 225/523
SBLive! Value
20 GB Maxtor 7200 RPM ATA66
60 GB WD 5400 RPM ATA100
40x CD-ROM
Imation 12x8x32x CD-RW
Yes, I think I may have messed up when I put the heat sink on.. I tried one direction and it didn't quite fit so I turned it around, but it had already made contact with the thermal grease.. I am going to redo it and see if it improves.
------------------
***
My System Specs
I turned the HSF around, definitely was backwards :P but that did absolutely nothing. My cpu is still that hot. ***? this really sucks.. there is nothing obstructing. My chassis fan is 81 degrees fahrenheit though, could that be the problem?
now Ive seen it at 138 degrees! damn!
------------------
***
My System Specs
The chassis temp sounds just about right. Something is definitely going on with that CPU, though...something isn't right. Is your CPU fan working correctly?Quote:
Originally posted by Gladius:
I turned the HSF around, definitely was backwards :P but that did absolutely nothing. My cpu is still that hot. ***? this really sucks.. there is nothing obstructing. My chassis fan is 81 degrees fahrenheit though, could that be the problem?
now Ive seen it at 138 degrees! damn!
For comparisons sake, my XP system has a chassis temp of 82F and a CPU temp of 100F right now...and I even have the thing open. So your chassis temp is definitely ok...
------------------
AMD Athlon XP 1.4GHz/1600+ @ 1.53GHz/1800+ (133/266 FSB @ 145/290)
Shuttle AK31 rev. 3.1
256 MB Kingston PC2100
Visiontek Xtasy 6564 GeForce3 Ti200 @ 225/523
SBLive! Value
20 GB Maxtor 7200 RPM ATA66
60 GB WD 5400 RPM ATA100
40x CD-ROM
Imation 12x8x32x CD-RW
[This message has been edited by Stratus Fear (edited January 03, 2002).]
hmm.. I think I will contact AMD today.
------------------
***
My System Specs
i heard that it also depends on the motherboard.. the ASUs K7 mobos report higher temps then other mobos.
------------------
Have A Nice Day!
***My System***
Got Hardware? (GH?)
AMD's Forum
OK.. I contacted AMD just now and they say that my temp is average. And that the 1.4 range idle anywhere from 40-70 degrees celsius but can go up to 95 degrees celsius without any problems. Aparently the 1.4 is just a very hot CPU https://www.sharkyforums.com/images/.../2005/06/5.gif
------------------
***
My System Specs
95 degreea celsius?? AHH no CPU can take more the 87-90 C...Quote:
Originally posted by Gladius:
OK.. I contacted AMD just now and they say that my temp is average. And that the 1.4 range idle anywhere from 40-70 degrees celsius but can go up to 95 degrees celsius without any problems. Aparently the 1.4 is just a very hot CPU https://www.sharkyforums.com/images/.../2005/06/5.gif
------------------
Have A Nice Day!
***My System***
Got Hardware? (GH?)
AMD's Forum
I had the same type of problem with the first and LAST Orb that I bought. The temps were just to high and I think yours are too. My problem was the contact between the heatsink and the core of the CPU was not flat and there was no way that I could get the sorry clip to keep the heatsink flat against the core of the processor.
Look at the Thermaltake web site and read the install instructions for the Orb. Pay particular attention to the part where it says NOT to put any force on the heatsink when you install it. If you hold the heatsink down it will not be flat against the core.
If all else fails I would suggest that you get yourself an Alpha 8045 heat sink with the 80MM high output fan. I have one on a XP1800 and the temps seldom get above 100F.
You will be forced to remove the motherboard to install the heatsink but the effort is certainly worth it. The best price I could find was from http://www.2cooltek.com
I bought the PAL8045 Kit for $44.00.
[This message has been edited by Mechanic (edited January 03, 2002).]
Not really... Look at mine, I'm using the Arctic Silver II compound as well with the Alpha Fan on my Athlon XP 1600+ (1.4 Ghz).
Here's a screenshot of the temp: Screenshot
Pretty sweet!
Of course the Alpha PAL8045 is probably a good reason why the temp is so low - take a look at the comparisons in Anandtech or Toms Hardware. You'll see that the heatsink has a lot to do with lowering the temp, and the from there a decent fan.
------------------
-Windows XP Professional
-Antec SX635 Case w/ 350 Watt Power Supply
-Soyo SY-K7VDragon+ KT266A w/ Promise RAID Motherboard
---w/CMI 8738 6-Channel Dolby 5.1 Surround DSP with SPDIF and Optical in/out
-AMD Athlon XP 1600+
-VisionTek XTasy 6564 64MB AGP Nvidia GeForce3 Ti 200
-512MB 2 x 256MB Samsung DDR PC2100 RAM
-Alpha PAL8045 w/ Sunon 42.5 CFM fan
-IBM Deskstar 60GXP 60 GB 7200RPM Ultra 100
-Maxtor 30GB ATA/66 Ultra IDE 7200RPM
-Maxtor 21.2GB ATA/66 Ultra IDE 7200RPM
-IBM Deskstar 45XP 20.5GB ATA/66 Ultra IDE 7200RPM
-Sigma Hollywood Plus Hardware MPEG2 PCI Card
-Toshiba 8X DVD ROM EIDE (DM1212K)
-TDK VeloCD CD-RW 8X/4X/32X
-Netgear FA310TX Fast Ethernet PCI Adapter
-Alesis QS8 Synthesizer (Serial MIDI)
-Pinnacle Studio DV Card (firewire) - for DV Camcorder
-Panasonic PVDV-600 Camcorder w/ 0 lux nightvision (infarred filter)
-Canon s100 Digital ELPH
-Lexar Jumpshot Compact Flash Reader
[This message has been edited by muevelo (edited January 05, 2002).]
the AMD Athlon 1.4Ghz run hotter then most CPUs. It has to do with the CPU core. the 1.4Ghz are not good overclockers due to heat problems. make sure that you have good case Fans, at least 3-4. and a good heatsink..
------------------
Have A Nice Day!
***My System***
Got Hardware? (GH?)
AMD's Forum
VR-Zone Hardware Forums
[This message has been edited by GeForce (edited January 05, 2002).]
Lets not forget that you are running an XP and from the looks of it Gladius runs a Tbird. (XP run cooler than Tbirds).Quote:
Originally posted by muevelo:
Not really... Look at mine, I'm using the Arctic Silver II compound as well with the Alpha Fan on my Athlon XP 1600+ (1.4 Ghz).
Here's a screenshot of the temp: Screenshot
Pretty sweet!
Of course the Alpha PAL8045 is probably a good reason why the temp is so low - take a look at the comparisons in Anandtech or Toms Hardware. You'll see that the heatsink has a lot to do with lowering the temp, and the from there a decent fan.
I don't really put much faith into what AMD tech support told you, Gladius.
Max temp of 95 C only means AMD will guarantee your chip won't turn into a black piece of coal until you hit at least 96C https://www.sharkyforums.com/images/.../2005/06/5.gif
Usually the average temps of a well cooled system (in your GHz range) is in the 40s.
A few people on sharkyforums admit to 50s and a few gloat about 30s.
Was that 57 idle or under load? (idle be hot hot hot)
What size is your case? How many fans?
How fast is your CPU fan?
Ever try using another monitoring program (I use motherboard monitor 5 myself)?
------------------
Athlon XP 1900+
ABIT KR7A-RAID
512MB PC2100 DDR
2x60gig Maxtor ATA100 HD
LG GCE-8160B 16x-10x-40x
Pioneer DVD-113
VisionTek GeForce3
SBLive Value
3COM 10/100 ethernet
Yeah I had an Orb come with my machine when I bought it. 3 months later the Orb died and My 1GHZ T-Bird fried. Took the machine back to the store and the guy opened the case took the Orb off and remove the chip and went smell this. The guy in front of me in line had the same problem. He put a different heatsink/fan on and replaced the T-Bird no charge. He told me they have been having problems with the Orbs and don't use them or sell them anymore.
I have that Asus Probe 2.14.08 and it is only off by 2 degrees F on the MB temp, verses a temp probe I stuck in the top of the machine near the PS.
My temps MB 87, CPU 122F, room 78F with Silicon heat sink compound: No overclocking.
Case has 2 fans 1 in front and one in back, and the 300W power supply also has a fan.
I guess I need to turn down the heat in my place.
try a different mobo monitor
the one from asus sux
------------------
"For in the end, there can be only one!"
amdathlonC 1.2ghz@1400
abit KT7A 256mb Cas2
IBM 75gxp 30gig 12xtoshiba dvd 8xcd-rw
SBLIVE!
Kyro 2 64mb