Pentium 4 2.66Ghz only running @ 2.0Ghz
Can anybody Tell Me Why?? I think its the cpu frequency jumpers on The Mo-Bo but when i set the jumper frequency to 133 it refuses to boot up??? New CPU New Mo-Bo an everything. Now Have Frequency Set to 100 And Boot Fine And Works, But @ 2Ghz
Liteon 19" Monitor
EliteGroup P4VXASD2+ Motherboard
Intel Pentium 4 2.66 Ghz
DDR 333 512 Mb
Seagate 120 Gb and 80 GB HDD
SIS 32MB AGP
Liteon 52x Cd-rw
Pentium 4 2.66Ghz only running @ 2.0Ghz
Thanks Ranger2992,
So Ok, im clear on that it has to be a frequency of 133 which i can change no problem. But as for the "ram dividers" I would assume that these are jumpers on the board somewhere that have to be configured?. Any help on this one please.
Pentium 4 2.66Ghz only running @ 2.0Ghz
Thanks Once Again Ranger2992
But On my manual it tells me that the Clear CMOS jumper is JBAT1 is that still ok? Im not being a div, just dont want to bust my new PC as you can apreciate. And By Screwing around with these jumpers can I Blow Something Up??(Ask A Silly Question Get a Silly Answer I Suppose!) Im gonna try you suggestion in abot 10 Minutes ill get back to you in a second. Thanks Buddy.
Liteon 19" Monitor
EliteGroup P4VXASD2+ Motherboard
Intel Pentium 4 2.66 Ghz
DDR 333 512 Mb
Seagate 120 Gb and 80 GB HDD
SIS 32MB AGP
Liteon 52x Cd-rw
Pentium 4 2.66Ghz only running @ 2.0Ghz
ranger2992,
Thanks for your dedication to my Case
Im Not sure That You Have The Exact manual So Ive Given You The URL
ftp://ftp.ecs.com.tw/manual/eng/p4vxasd2p50aeng.zip
I tried what you said more or less, but On my MoBo I have two jumper Frequency settings and The Bios Is Not exactly as you said I hope that once you see the manual from The URL Ive Given You It will Explain Something to You. Im wondering if it has something to do with The Following Jumpers. (J2A, J2B, J2C J2D, J3A, J3B, J3C and J3D) something to do with the dimm or DDr settings. I have Set The Dram Voltage (JP1) To Open 2.5V(DDR) JP2 I Havent Touched (Wakeup On Keyboard), J13 (Flash Rom Voltage) I Havent Touched, JP4 (Flash Rom Size) I havent Touched. I Hope I Have Helped You To Understand A Little more This Problem Plaes Dont Give Up On Me. I Appreciate Your Help. Thank once Again.
Pentium 4 2.66Ghz only running @ 2.0Ghz
On The SDRAM Frequency setting I Can Ony Get a choice of 133 or 166 Mhz
On The SDRAM Latency I Have A Setting Of 2.5
On The CPU PnP setup page it tells me its locked and i cant cahenge the settings.
This Is A little More Info For You I Hope It Helps
Pentium 4 2.66Ghz only running @ 2.0Ghz
Hi Ranger 2992, Thanks For the response,
So your telling me just to remove both the jumpers (JP1A1 and JP1B1)from the Motherbaord so set the CPU frequency to 133mhz is that right?? Thanks in advance
Pentium 4 2.66Ghz only running @ 2.0Ghz
Back Again, just to add
even though CPU Clock jumpers (JP1A1 and JP1B1) should be set to 2 and 3, and 1 and 2 Respectively to get CPU frequency of 133m, I should just remove both Jumpers? Once Again Many Thanks.
Liteon 19" Monitor
EliteGroup P4VXASD2+ Motherboard
Intel Pentium 4 2.66 Ghz
DDR 333 512 Mb
Seagate 120 Gb and 80 GB HDD
SIS 32MB AGP
Liteon 52x Cd-rw
Pentium 4 2.66Ghz only running @ 2.0Ghz
Back Again, IF You See This Ranger2992, Could You Please Confirm That I Should Remove Both cpu Frequency Jumpers. Thanks Once Again